Search results

  1. C

    40s on ram 1500

    I'm running factory 3.92 gears
  2. C

    So you want 40s on a 1500

    Pix give the size no justice at all. It's alot bigger than it looks.
  3. C

    40s on ram 1500

    I made a new post guys has all my specs. I'll post pix here too with the 40s for ypu guys
  4. C

    So you want 40s on a 1500

    I hope this helps anyone looking to do this.
  5. C

    So you want 40s on a 1500

    Pix of the truck
  6. C

    So you want 40s on a 1500

    Okay guys here it is... I have a 2018 ram 1500. I clear 40s fairly easily and here is what I have done. Build consists of this.. 6 inch rough country suspension lift ( with correct struts from RC.) 3 Inch body lift 2.5 inch leveling spacer on front 2 inch leveling spacer in rear Wheels are 20x...
  7. C

    40s on ram 1500

    Okay my current setup works. I have a 2018 ram 1500, 6 inch suspension lift with a 3 inch body lift... I run 39s currently with factory wheels and 2 inch wheel spacers.. no issues with very minor trimming. I want to go with 40s, and a 12 inch wide wheel , with -51 offset. What am i going to...
  8. C

    Locker for 2019 ram 1500

    Okay so years ago I installed a powertrax locker in a 9.25 rear in a ram. My buddy just now smoked the spider gears out of his 9.25 in a 2019 ram 1500. It's a diff looking 9.25 than the one I installed the power Trax locker in yrs ago. I need to figure out the correct one for his 9.25. Like...
  9. C

    Help lift & tires

    I had 3.92 gears from factory. It really doesnt seem to bad power wise i did lose a little. Im @ a 12 mph average when driving at 75mph which is really closer to 84mph speedo is off some. I never checked my fuel mileage before but my cousin has the same truck same gears all stock ill ask him...
  10. C

    Help lift & tires

    Here it is boys. 6inch rough country suspension lift, 3 inch body lift, 2 inch wheel spacers. It all fit didnt rub but it was to close for comfort so i trimmed next to nothing just in case. Now if i were out 4 wheeling i dont advise it itll prob rub full flexed but atreet driving NO problems...
  11. C

    Help lift & tires

    Perfect, i do see a good deal on 39x13.50. What's your thoughts on that size?
  12. C

    Help lift & tires

    Yes i def want good spacers. I have 2inch spacers now, and i have 1.5 inches of clearanc3 from my UCA with 35x12.50
  13. C

    Help lift & tires

    The reason for the spacers is to keep the tire from rubbing where the upper ball joint is. Ill need them only for the reason to keep it away from it.
  14. C

    Help lift & tires

    Ok, i am new here. This is my first post. I have a 2018 Ram 1500. 3.92 gears. 5.7 Hemi. 8 spd trans Obviosly. Currently, i have rough country 6" suspension lift, 35's. 2inch wheel spacers with factory chrome wheels. I want to add a 3" body lift with a 3" wheel spacer and run 38's. I dont...

Latest posts

Staff online

Members online

... and 16 more.
Total: 1,296 (members: 66, guests: 1,230)
Robots: 1,167

Forum statistics

Threads
202,023
Posts
2,947,427
Members
166,509
Latest member
sklontz97

Share this page

Top