4TH GEN REMOTE START PARTS
Cleaning out the garage…
Parts I bought to add remote start to my daughter-in-laws RAM 1500 Classic…then her truck got totaled by a drunk driver.
These parts are NIB and were intended for a 4th Gen, Ram 1500 Tradesman to add remote start; as many of you know you’ll...
Look at this thread…if you already have AlfaOBD, the security bypass cable and the OBD reader it’s pretty simple if you have the skills:
https://www.ramforum.com/threads/how-to-add-remote-start-to-2017-ram.99849/
I did mine in one afternoon, and that included swapping out the hood latch for...
Wasn’t there a recall on certain 4th Gen Rams regarding the driver side mirror glass falling off??
I received a couple notices on my 2020, but ignored it since I went to aftermarket power towing mirrors…
MAR means Multimedia, Accessory, Radio (European term)…in the US it means “ON” position as previously stated.
Here’s a reference:
http://workshopmanual.com/files/303/pdf/page-72.pdf
I used this one for my 2020 Classic…$9.47 Amazon Prime:
EPAuto CP671 (CF11671) Replacement for Mazda CX-7 / RAM 1500,2500,3500,4500,5500 Cabin Air Filter includes Activated Carbon
by EPFamily Direct
Learn more...
Since I already had AlfaOBD, the MX+ interface and the security bypass harness due to other mods (2020 Classic) I just did it myself...
About $36 for the hood latch w/switch, ran a wire to the BCU. $9 for two remote button overlays off Amazon.
After I finished the programming I read how much...
I have a 2020 Quad cab Tradesman with a six-cylinder engine... I only have about 4200 miles on it and I just checked...
Yes I hear a very audible click outside the truck when I go from park to reverse ...and when going back to park.
Sent from my iPhone using Tapatalk
If memory serves....an RA2 essentially drops in without changing bezels.... but in order to have Bluetooth you’ll need to add headliner mics and the appropriate wiring harness up the left side A-pillar...then program with AlfaOBD for the mics.
DIY: 2017-19/20 classic Overhead Mic and Compass...
Haha...I programmed multiple fingerprints in the safe prior to mounting.
Glad I did; difficult to use the index finger (or will need to reprogram for that finger) because of the angle.
That safe can be set up for button sequence and/or fingerprint. Key lock backup in case of battery failure...
From your dealer...take your registration and driver’s license to the Parts Dept to prove the truck is yours...they should give you the 4-digit PIN for the vehicle for free.
Sent from my iPhone using Tapatalk
I assume you mean the remote...
Take it apart and see if it looks like this:
The important section for you is round pad underneath where the new remote start overlay will go (red arrow in pic above).
New overlay:
The extra button pads on the circuit board are used in other applications for...
OK...thanks...
Ok after those steps did you reset your RF Hub in AlfaOBD????
And do you have the hood latch w/the switch and have it wired?
Sent from my iPhone using Tapatalk
Welcome to the forum!
I’ll add on to the others... please list the steps you have taken so far.
Also tell us (after your description of the steps you have taken) if after adding the fob overlay and hitting the start button if the horn honks one, or twice or not at all and what does your driver...
I was going to add the OEM bed lights to my 2020 Ram 1500 Tradesman Quad Cab.
The ‘new’ ones with the built-in button were a longer lead-time so I ordered the older kit (82214870AB-001).
It was less expensive than the new kit (version AC) and only has two wires running forward in the harness -...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.