Here is the door one if you want to try it.
Try setting this:
CBC I/O Usage- driver door ajar switch usage > not set, none
CBC I/O Usage- front passenger door ajar switch usage > not set, none
CBC I/O Usage- left rear door ajar switch usage > left rear lamp diagnostics
CBC I/O Usage- right rear...
I had LED in the rear first those popular c-shaped ones by Spyder and now using Alpharex's new LED tail lights.
When Alpharex tried to help me they wanted me to put my stock non tail lights back in and see if I still had errors, frankly it was easier to just add the resistors.
I did not have...
I mounted straight below the light on the top inside edge of the bumper where it curves towards the tire, there was just enough slack to use a zip tie.
Mine was plenty long enough to zip tie to the top edge of the bumper there was even a hole in the perfect location.
I will try and take a picture tomorrow, it's really a terrific spot shouldn't get wet and plenty of ventilation and no chance of melting anything.
I did have a little bit of a...
Nice! I have to do the same thing, in fact she prefers I just do the ordering.
I had those last and had no issues, they have you use you orginal reverse light bulb so if you would like to change it to LED you can use this bulb (note I did have to change alfaOBD to LED backup light)...
I'm still happy with mine, although I have never followed my truck to see but you can always do what did anyways and add the tail light bar.
I went with the Opt7 60-inch with the amber sequential turn signals as if you notice the new Rams are using amber again as it's actual safer to have...
I would imagine Alpharex would tell customers to use your settings if they worked, although I had quads so maybe had I been coming from projectors they recommend those settings.
They only told me to make two changes in aflaobd and neither had to do low or high beam. They were adamant that those...
I have the LUXX and they couldn't fix it for me either, I would have never bought them had I known all the hoops ahead of time or at least told me up front just put the resistors in.
The last time I spoke with them they wanted me to start removing other led items like my Alpharex tail lights to...
I had good luck with their [-shaped tail lights and CHMSL light but no experience with there customer service.
If you paid with PayPal just open a claim there. PayPal gives you 180 days in which to file claim...
I would get parking light out within 30 seconds of starting the truck, only later after I messed with disabling the i/o door ajar did I start getting turn signal out when I used them.
I have another vehicle I mostly drive so it took me a while with enabling and disabling things but maybe yours...
These are the ones I used and right I tried everything with alfaobd I could find online and nothing worked.
I drove around most the day today and had no errors so looks like it's fixed.
https://www.amazon.com/gp/product/B087CPXNT4
Well so far so good. I put the resistors in two days ago and haven't had any errors.
Just before I put them in I started getting all four turn signals out so my system was going haywire, I would clear the codes and they would instantly come back.
The gold looking resistors were long enough to...
I got them, just ordered the same ones you said from Amazon.
Need to find a little bit of time to install them and they are plenty long so should be able to zip tie no problem
Ha it didn't I just had to move the truck and parking light out is back...
Well I got the gold resistors like you posted so in they go...
I gave up on Alpharex helping me it was to many hoops
I may have fixed mine.
I originally disabled the driver and passenger door ajar and after I ordered resistors but before I installed them I thought I would switch everything back to the way it's supposed to be but after I changed those front door ajar's back to jeep/truck I had to make quick...
I haven't yet but certainly will give that a try.
I really like the lights themselves and sure do want them to work correctly.
I read all through the various threads and have been trying one thing at a time to make sure I don't do too much at once they did ask me what other led lights I had...
I got with tech support yesterday and they were unable to solve my issue, we ended at they wanted me put my stock tail lights back which I'm not sure how it will resolve the issue. I'm using the new tails and before those had the popular C-shaped led lights both of those have cause no errors...
I haven't given up quite yet and actual I was wrong I don't get front parking light out, I get
front side marker lamp control
short circuit to + battery/open circuit
Last test failed
error present
Failure warning lamp 'ON' Not Requested
Codes B16BF and B16C3
I haven't been able to get rid of the Front Parking Lamp Out on my 2014 with the LUXX style.
I tried all sorts of stuff with alfaobd and don't think it's going to be possible to get rid of.
I really like the lights however...
In alfaobd go to car config and change CBC I/O Usage change the two front door ajar switch usage settings.
(from Jimmy07 previous post on parking light out)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.