You need to run two wires from the connector under the fuse box. One to ground and the other to the BCM C1/A pos 11. Feel free to PM me if you need help.
If you are on the current version of Alfaobd, there is a bug. Assuming you’re using an android device, uninstall it and use this link to install an older version that should work: https://drive.google.com/file/d/1nz53G-8oeZ7wXsycwyNygx89Y5zy24D5/view?usp=drivesdk
As far as being able to pull...
As long as you have a decent OBD device like the MX+ you should be able to flash it no problem assuming this is for a 2013+ 4th gen? Some people have had to try multiple times before they’ve gotten it to work though.
Assuming a company who flashes these probably has a bench setup to power the...
Do any of my friends up north have any UCS update files? I’ve got a UCS radio that I would like to do some testing on. If anyone has 22.6, 28.3, 30.24, or 34.2 I would greatly appreciate it!
FYI, you may or may not have already need fully wired. I made a video explaining how to confirm that here:
https://youtu.be/X4KZsXF8B_Q?si=m-5jmGyaxwScG-SG
They populate the connector with a wire to weatherproof it. Just came across this post and was going tot well you the wire most likely ends a few inches down the wire loom. Glad to see you figured it out.
You’re supposed to do that when you program the fobs and reset the hub by entering a new (or your old) pin.. If you used 0000 then I’m pretty sure you are stuck with it now but I could be wrong.
Yes needs to be new without a VIN written to it already. I’ve confirmed that they all pretty much work across the years even though they are listed as year specific. Biggest thing you don’t want to do is order one that requires an external antenna if you currently have one with an internal...
There is a bug in the current version of Alfaobd. Not sure if you’re using windows or android version but if you’re using android, uninstall alfaobd and see if you can install an older version from this link:
https://drive.google.com/file/d/1nz53G-8oeZ7wXsycwyNygx89Y5zy24D5/view?usp=drivesdk
Here’s a video I did on the rf hubs. You will need a new rf hub. You also may need your start-x reprogrammed after the upgrade. I had to have my viper remote start reprogrammed for a push button truck.
https://youtu.be/cO62sRyLxBE?si=egWiYnPpQ4Sx2yFl
Will run from the back wall over the drivers side c-pillar and then you can run it under the carpet up to the dash.
Here’s a video on the harness:
https://youtu.be/nFrfpXzfJ8s?si=m9yoo-P5_WbfkDdQ
Selling an OEM LED CHMSL with cargo camera and harness. You will need Alfaobd to turn on the camera function. $475 shipped within the US. Will ship international for additional cost.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.