Search results

  1. B

    Hesitation/Stumble Issue

    I've since MDS delete, cammed and tuned it. I think the problem I had was related to having headers, exhaust and intake and not tuned.
  2. B

    Can someone help me figure out why in the hell this would happen?

    Aluminum wheels definitely need to be retorqued. Steels don't seem to loosen as much as alum. I had just put my summer aluminum on and about a month earlier and retorqued, but I could hear a rumble when coasting and went away on throttle or brakes. Brought to the dealership as I was under wty...
  3. B

    Non MDS Lifter options - Mother Mopar or Comp Cams?

    I put that cam kit In my 2011 laramie. Love it. Also using hellcat pump. My kit was missing a spring on a valve stem deal and a retainer for the springs. Comp sent me a stem seal and ghosted me on the retainer. Still playing with the Tune but likely to have Chris at player3 in Edmonton...
  4. B

    Alternator Shorted to Ground

    Sorry. Have not replace the alternator yet. She must be shorted same as OP. My batt is dead I put a charger on it and my alternator starts buzzing and getting warm. My battery light has been coming on for the last week. Replacement alternator will be in on Monday and I can get this thing running.
  5. B

    Alternator Shorted to Ground

    Same truck and same problem.
  6. B

    COMP Cams Missing Pieces

    Ive purchased a master kit and found one of the valve seals missing the spring and im also missing a spring retainer. Its extremely frustrating. I spent $2000 on this kit and now ive got to wait for them to send me the missing pieces. Anyone else have problems with their kits?
  7. B

    Hp tuner

    I reached out to Chris and told him you sent me. Thanks.
  8. B

    Hp tuner

    I am a member there. That forum is a little overwhelming I haven't seen anything for beginners there that starts with the basics. It's all questions for people who are running into issues. Is discussing tunes on this site against the rules or something? There are a lot of posts mentioning hp...
  9. B

    Hp tuner

    Putting a cam (comp cam) in my 2011 1500 laramie. I am looking to see if anyone has done this and did their own tuning or a list of contacts who could help with the Tune. I don't have access to a Dyno. Is this going to be an issue? I have done a 5.7 cam and lifters before on a different truck...
  10. B

    2014 Ram hemi 5.7 rpm fluctuation and hesitation on acceleration

    Sounds like a MAP Sensor. It's like $12 from rock auto. Back side on passenger side of intake manifold.
  11. B

    Tick after cam and lifter replacement

    A little history. Truck came in - no tick but a shudder at low rpm CEL on misfore cyl1. Did the usual plug and coil swap and dtc didn't follow. Removed valve cover and found intake rocker barely moving. Needs cam and lifters. Replaced cam and lifters. Did oil pump and timing components as...
  12. B

    2002 Would not idle. Then it did

    Unplug the idle air control solenoid and see if it runs. Plug it back In while running and it should be ok. Not sure why. I have a 2002 at work and we have to do this every month or two. I've changed the solenoid and the replacement does the same thing.
  13. B

    Hesitation or slight jerking at light throttle

    MAP sensor fixed my hesitation at light to medium throttle.
  14. B

    Hesitation/Stumble Issue

    I replaced the throttlebody with a 90mm one. New set of injectors and still hesitating. Replaced map sensor and so far so good. Part was $12CAD @ Rockauto.
  15. B

    Hesitation/Stumble Issue

    I have a 2011 with this issue. Ive bought a new throttlebody and a set of injectors. If that doesnt fix it im ready to figure it out whether its a new cam and lifters, New heads. Whatever it takes. I like my truck im not intetested in parting with it.
  16. B

    Northerners

    Here in Whitehorse I get about 27 l/100km in the winter. Summer I'm around 17-18

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,404 (members: 61, guests: 1,343)
Robots: 1,969

Forum statistics

Threads
195,614
Posts
2,872,577
Members
156,439
Latest member
Prorider17

Share this page

Top