Search results

  1. T

    How To: Add Factory Keyless Enter N Go

    Got a new hub, installed it and push start works great now! Though the new RF Hub has a pin '0000' which I'm assuming is default. How do I set a new pin for it (should I even do that)?
  2. T

    All Repair Parts @ Employee Cost!

    Hi Benny, I'm looking for the following: RF Hub - 56029946AB Hood latch - 68159725AB
  3. T

    How To: Add Factory Keyless Enter N Go

    Yes, it is. Well, crap, did I just burn two key fobs as well!? Is there a way to reuse them?
  4. T

    How To: Add Factory Keyless Enter N Go

    Alright so a few observations. I reconnected the old RF hub and ignition module and the truck started right up with no issues. I then connected the new RF hub and new push button ignition module, did an RF hub reset in Alpa and was able to start the truck. It only ran for 1-2 seconds and then...
  5. T

    How To: Add Factory Keyless Enter N Go

    Tried it, it didn't. I did notice though that as I was stepping on the brake and pushing the start button with the fob it still showed the message of press the brake and push start. The best it did was change the power state of the start button into run.
  6. T

    How To: Add Factory Keyless Enter N Go

    I'm running into a problem where after installing the RF hub, two in-cab antennas, push-start ignition switch and programming 2 new fobs the truck will not start. I could use any and all help! Initially after I wired up the RF hub, antennas, new ignition switch and programmed the keys I totally...
  7. T

    How To: Add Factory Keyless Enter N Go

    Does anyone know where I can buy the 174910-2 connector or two (not 10k)? Or would someone will be willing to sell an extra one they have?
  8. T

    How To Add rear Park assist

    I bought another park assist module, because all these "bad" sensors are making me wonder if there is possibly something wrong with the one I have. My truck is a 2018 model and the module seems to be up to 2017...though it appears to work. Once I get the new one I'll check to see if the current...
  9. T

    How To Add rear Park assist

    Yes, I have to verify that there wasn't something like that. I also find it super strange that so many appear to be non-working. If there is a way to test the sensors themselves individually I would like to know so I could do that.
  10. T

    How To Add rear Park assist

    Does anyone have a link to a good place to buy sensors from? I've bought 5 different sets now and in all of them at most 1/2 work!
  11. T

    How To Add rear Park assist

    I appreciate all your suggestions and advice....plus the tons of content you had already added to this thread!
  12. T

    How To Add rear Park assist

    Well, I guess I stand corrected. It's apparently possible to buy 3 sets of totally faulty sensors from 3 different sources! Looks like I have 4 good ones out of 18 total. One-by-one I swapped them out util I found 4 that work and rear park assist now works! Just need to order 40 more and I...
  13. T

    How To Add rear Park assist

    Got the new sensors in and seeing basically the same thing...though when I run the wiring test it's coming back with only 2 sensors having fault codes. I check the voltage at the rear harness to make sure the power and ground weren't reversed, they were not. I suppose I could have miss-wired...
  14. T

    How To Add rear Park assist

    Pretty sure canbus is correct. I tried reversing the wires and got errors stating that the park assist was not found. I bought new sensors and will try them when they get here.
  15. T

    How To Add rear Park assist

    I bought the module on eBay, but if it was defective I would expect to see something in the faults with Alfa. The sensors are Bosch...bought those on eBay as well.
  16. T

    How To Add rear Park assist

    That's the part number I bought
  17. T

    How To Add rear Park assist

    I did and it came back with the same results as when I read the faults, "Performance or incorrect operation". One thing I noticed this time is that there are only 9 faults where I would expect 10, as there are 10 sensors. It appears that sensor #10 is not generating a fault? I looked at it and...
  18. T

    How To Add rear Park assist

    Ahh, was able to connect to it...not sure why it didn't work before. I see the faults for all sensors. The front ones are ground short (they are not installed), but the rear ones have a "performance or operation" faults. I checked the voltage on the individual sensors and they appear to be...
  19. T

    How To Add rear Park assist

    Yes
  20. T

    How To Add rear Park assist

    2018 1500 3.6 Quad
  21. T

    How To Add rear Park assist

    I have the listing for "Parking" in Alfa, but there is no compatible module that matches my vehicle model year. It has listings for Parktronics Module MY2013, MY2013-17, MY2014-17 and MY2010-2012 I tried connecting to the two closest (the MY2017 ones), but it will not connect to either. This is...
  22. T

    How To Add rear Park assist

    Yeah, sorry. Here they are:
  23. T

    How To Add rear Park assist

    Do you mean to the "Body Computer"? That's the category I used to program the various park assist settings. If that's it then I've already tried that and I get 0 faults. Or is there another category I should be reading them from in AlfaOBD?
  24. T

    How To Add rear Park assist

    I'm pretty sure that my c1 connections are correct...otherwise I wouldn't see the sensor warnings in dash, no (how would I know if I reversed the canbus wires?)? I'm wondering if I wired the rear sensor harness power/ground though. I'll need to check that.
  25. T

    How To Add rear Park assist

    Right, so my switches always have the lights on. The front will blink when I click it, but the rear one is solid on all the time (even when clicked). This is what I see when I click the front assist aux button And this comes on when click the rear
Top