Search results

  1. J

    Did Redline Oil work against your Hemi Tick?

  2. J

    8hp70 heater bypass

    Where does one order bypass?
  3. J

    Cam failures or not. How many miles have you gone?

    Well the best labor quote I’ve found is 1300, and that’s with 1649 not including oil & new plugs. I might tackle it myself
  4. J

    Cam failures or not. How many miles have you gone?

    Looking at a cam from these guys, $1694 shipped with hellcat lifters and gaskets. https://www.modernmusclextreme.com/c-298-ram-performance-camshafts.aspx Is there a sticky to help with cam install, any other pointers, and that vvt cleaning? And for the guys who went mild 20hp cam, do y’all...
  5. J

    Cam failures or not. How many miles have you gone?

    I’m in oil & gas, and use my truck to drive from Denver to Williston! So I’m looking at the cheapest labor for cam install
  6. J

    What the he$L does my 2016 need??

    Just crazy reading, some guys replacing manifold studs twice in 50k miles. Passenger side got me a month ago, at 112k miles. but I’m just shocked how these will eat up the cams like this. Half tempted to just total it out lol
  7. J

    What the he$L does my 2016 need??

    It kinda has the tone of the normal hemi tick. I have a 2nd battery in the back for the audio so I’d say battery idea is out. The plugs looked like trash when they came out so I’m assuming it’s cam. Now to find a shop who isnt gonna charge me 6 grand
  8. J

    What the he$L does my 2016 need??

    I replaced cyl 1 & 3 plugs, with a new coil on #3. Cel comes on up the dash, then will go away intermittently
  9. J

    What the he$L does my 2016 need??

    Had there been any luck in replacing the lifter versus the full cam?
  10. J

    Cam failures or not. How many miles have you gone?

    I’m extremely mechanically inclined but this would be my first ever cam replacement. Would you do yourself or pay to have it done?
  11. J

    Cam failures or not. How many miles have you gone?

    2016 bighorn, bought with 45k miles…. Now have 11k, and misfire cyl 3…. Both cyl 1 & 3 had junky plugs(55k on them) so I threw new plugs in those cylinders and a new coil on #3. Anytime above 3000rpm cel flashes…. I’m guessing the lifter ate the cam!! My dealership quoted me 6000 for cam...
  12. J

    PHONE CHARGING PORT

    Is there no other place to charge your phone besides inside a truck when it isn’t running?
  13. J

    What the he$L does my 2016 need??

    Getting these codes on stock flash. Gotta drive home (700 mi) before I can pull plugs, which were put in 10/19 and have 60k on them. The codes will come on, then as I’m typing literally disappears off the dash
  14. J

    Manifolds leak again, options please

    Andddddd 1 out
  15. J

    Manifolds leak again, options please

    Here goes nothin!
  16. J

    Manifolds leak again, options please

    Also replaced the pcv valve... hope that was the leak. thanks ram for making that $53
  17. J

    Manifolds leak again, options please

    Called Jegs, arp studs and bbk gaskets here tomorrow. Will try belt sander and straight edge trick. When the installing, torque everything while cold right? After a heat cycle do the studs need a retorque? Anything else to look for?
  18. J

    How loud is your stereo?

    And anyone who hits 160db.... doesn’t drive on the daily. That’s competition but hey who’s counting
  19. J

    How loud is your stereo?

    I can pay for my own hearing aids, as I pay for my own medical but thank you sir
  20. J

    How loud is your stereo?

    Dc audio level 4 12s, with blue carbon fiber dust caps. Dual 1/0 gauge power & ground, a titan8 lithium battery pre-amp for reserve, and a netaudio pac line output converter that creates rca for my amp. The smaller blue/grey wires are for my voltmeter, they are right there at the amp as well so...
  21. J

    How loud is your stereo?

    2 12s on a 5000w amp. It can be difficult to breath
  22. J

    Oil leak and manifold leak? My luck

    Thanks dudes! How about new studs? I see some use arp?
  23. J

    Oil leak and manifold leak? My luck

    Do you use a straight edge to make sure you have a true surface?
  24. J

    Oil leak and manifold leak? My luck

    A small nut? I have a welder myself! Thank you
  25. J

    Oil leak and manifold leak? My luck

    Thanks!!!

Latest posts

Members online

Total: 453 (members: 12, guests: 441)
Robots: 1,080

Forum statistics

Threads
195,488
Posts
2,870,947
Members
156,210
Latest member
gimmeegimmmee

Share this page

Top