Search results
-
F
Replacing variable displacement compressor with a fixed displacement
Still wondering till now. I have seen it done to many other brand cars, ,also to the 2015-2018 chargers but not to a ram. Hope anyone has done it or knows how to do it. -
F
Replacing variable displacement compressor with a fixed displacement
Hi there, I already tried looking through the forum for this topic but failed to find same question. Hopefully I get it here :) I was wondering if I could replace the AC compressor in my 2014 ram 1500 with a fixed displacement one since the variable displacement compressor does not cool well... -
F
my 14 Ram vertical Fog light projector retrofit
Sure I did. The cracks were there before, I just made them bigger. I tried on the OEM as they have already been through a couple of sand storms ( Saudi Arabia ) and were very hazy and loose, so I figured I would go for it. -
F
my 14 Ram vertical Fog light projector retrofit
Thanks for the fast reply. I thought you had some magical way of molding it XD. Mine came out as I said with the cracks and some marks like mud pattern after it gets dry and shrink. I have ordered Winjet fog lights to retrofit, as the OEM ones are very loose and can't be aimed. I will try... -
F
my 14 Ram vertical Fog light projector retrofit
Sorry to bump this old thread but I need to ask something . I did the same but with mini h1 8.0 in the fogs. I tried molding my oem fog light lenses but it had micro cracks that got bigger and opened up on the outside with the heat. Also i think the plastic got a little too hot in some spots... -
F
HID Ballast Mounting Locations + Mounting Techniques.
hey there, Oo So, I have the denso slim ballast running a newly fitted d2s 5.0 projector. I can't seem to find a decent place to mount it behind the headlight, the wire connecting to the bulb is just too short to have the ballast fixed. As you know it is not like the AMP connector that can be... -
F
Flash to pass lights only high beam?
That's what I was thinking. if I could do that with AlfaOBD, it would be great. -
F
Flash to pass lights only high beam?
If I used splitters for high beam signal to go to the low beam, would that be any harm? As in voltage feedback to the BCU. -
F
Flash to pass lights only high beam?
On my 2010 Toyota when I flash, both lights turn on. Also, someone in the AlfaOBD thread said their truck flashed both beams. If it is normal, is there a way to get both to flash together? -
F
Flash to pass lights only high beam?
Hi there, First thread for me So I have mentioned this in the AlfaOBD thread sometime ago, and did not find any solution. I have a 2014 ram 1500 laramie with the projector healight, and the problem is, when I pull the multifunction lever toward me for -flash to pass- it only flashes with the... -
F
AlfaOBD
Bulls eye Bingoo ding ding ding. Exactly what I want. Not so much for HID warm up time, but I just like it in my other car. I have a toyota Camry 2010 that I retrofitted the D2S 4.0 into, and when I flash to pass in it, it FLASHES. Both projector high and didecated high beam flash together very...- FUS88
- Post #13,624
- Forum: 4th Gen DIY
-
F
AlfaOBD
lol I hope this was my case. I park facing a wall and could verify that only high beam turn on for flash to pass. I forgot to add that I run HID in both lows and highs, but that never caused an issue for me -apart from bulb out messages due to me using a relay harness- other than that, all is...- FUS88
- Post #13,622
- Forum: 4th Gen DIY
-
F
AlfaOBD
Yes it is the factory projectors on the laramie trim, And it only flashes with the high beam -that is with all lights off- when driving at night with low beam on, it also flashes with high beam only without dropping the projector's shield. I have to push the lever for the projector's shield to...- FUS88
- Post #13,621
- Forum: 4th Gen DIY
-
F
AlfaOBD
Hi there, Been looking around for a while, but didn't find what I was looking for. Is there a way to get both low beam and high beam on when I pull the lever for flash to pass? That is on projector headlight in 2014 ram 1500. The way it is now is only the high beam gets turned on and the low...- FUS88
- Post #13,616
- Forum: 4th Gen DIY
Staff online
-
G-Ride990Administrator
Members online
- RodeoRam
- Gundog3500
- Madeury
- AnthonyRI
- AZ MARK
- N8033Fox
- Suma Performance
- CSPilgrim
- sellsmr
- cr2349
- dennis07
- Team Horner
- Pcc3737
- JayLeonard
- Mike Flea
- jeff_rey
- Arvindkd
- FullForceRam
- metalmike2016
- JRC99
- smoothee
- Gwerner74
- Dusty
- Viperz
- Marmay
- Kickboxer
- Johndjs
- 06 Dodge
- curtiscole1981
- mtofell
- Evazvn
- RealTruck
- ATNC
- StateOfMind
- Mike1C5
- BucketGruntJL
- Neilr5515
- TLK1
- jon0m0berry
- Tracker 13
- BDWheeler13
- SkylarMelo
- tnctx02
- Black1500Ram
- buckeyexx
- JoshsRam
- Bkirby
- G-Ride990
- northlane1
- huntergreen