Yikes.
Find a buddy, your dad, your buddies dad etc, someone who knows vehicles and have them learn ya a thing or two on what to look out for. If your tires are wearing that badly, it needs aligned. An alignment shop that's worth the name will tell you if anything is worn or wrong before...
Well first figure out if it's a bent housing or bent axle shaft. Put the truck on stands and let the wheels spin. Does the wheel wobble? Yes? Axle shaft bent. No? Housing bent.
I'm guessing housing bent from what I read here.
Classic method for the HD Rams is using an appropriate socket and extension on the wheel bearing bolts while turning the wheel to push the bearings out. It also is great for other service where you don't need to replace the bearing because it doesn't load anything but the mounting flange. Even...
Is there not an option in Alfa to pick what is the DRL? Should be option for park lights, turn signal, low beam, high beam. You pick which light is the DRL.
Ideally, no DRL. Dumbest automotive 'safety' feature there was until blind spot monitoring.
Well, barring some oddball thing like a severely damaged oil pan which would likely be causing other problems, the capacity of the oil system can't change.
Drain. Fill with specified amount and make note on your dipstick if it's reading way off. Chances are it's the wrong stick or even the...
I'd bet you can't find a single station that isn't using blender pumps. The tank information is always listed somewhere, contents and capacity. There's never an 89 tank.
Blend away on your own if you so please.
One piece will be the Sport style that is all plastic and paint matched to the truck.
Two piece will be the steel lower portion that's usually chrome but sometimes paint matched on high trim models with a smaller plastic upper portion that is usually painted but sometimes just black.
I skipped a lot of this thread, but the area you show at the rear control arm mounts is extremely high wash and very exposed. Nothing is going to stay on there better than paint. Sand clean and paint this area often if it bothers you.
However, exposed areas like that are not what's going to...
So... Some of the prior troubleshooting was done at the body shop (recent work including that door) while I was away.
Today I got to fool around more and, well, I'm a bit embarrassed. The aftermarket speaker in the front door is dead reading somewhere in the Mohm range. Put the stock speaker...
Found the fuse and it did reset the radio, no change on the speakers.
I may do some wire ohming this weekend but I also have a set of colored adapters coming to see what alfaobd can do.
I'll give that a look tomorrow, been away this week. Thanks!
Picked the truck back up and had a short drive home during which I noticed the right rear speaker cut in and out a few times as well.
Speakers at front right are inop. Dash and door.
I've tried numerous online resets. Tried battery disco. Tried different speakers. Checked wiring from the speaker back into the pillar and at the radio.
I have alfaobd but can't connect to the radio, seems I need a different adapter? If I were...
https://www.rockauto.com/en/catalog/ram,2018,1500,5.7l+v8,3441423,suspension,control+arm,10401
I looked quickly and it appears that the 2wd WITH air suspension shares the same control arm (# ending 346 and 347) with the 4wd models but the 2wd WITHOUT air has it's own control arms (# ending 158...
I can't speak to the quality of them, but I'd assume it uses a single bulb and has a shutter for lo/hi. This is how many many projector lights have been employed in the past. Basically you're running a high beam all the time with a portion of the beam blocked out into a low beam shape.
See what...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.