Search results

  1. B

    Lifter failure preventions?

    I have a 2010 ram 1500 4.7 158,000 miles, I changed the oil every 3k miles after it hit 120,000 I’ve been changing the oil every 2k miles, I use penzoil 5-20 full synthetic high mileage, no ticks, or knocks, only on cold start is there a small tick/knock for about 20-30 seconds then it’s gone...
  2. B

    2013 5.7 Engine hunting

    I’m gonna agree with jeepwalker on this one, if it needs a new engine and your gonna scrap that engine anyways, I’d just tear it down and see what you really have. Even if it is junk, you only wasted some time.
  3. B

    Front brakes dragging

    I replaced the master cylinder, no change. I doubt it’s the brake booster, I would assume front and back brakes would drag if it’s the booster, so I didn’t touch that, I have great brake pedal pressure, and when I bleed the brakes I have great flow of brake fluid, I’m still leaning toward the...
  4. B

    Front brakes dragging

    It’s not the calipers, I replaced them both, and both rubber brake lines. I just got the OBD link Mx+ and the alfaobd app, I went through and tested abs module, just the motor and listen to clicks, so I’m assuming it works fine. So I went ahead and did an abs bleed with the app, still no change...
  5. B

    Front brakes dragging

    Thanks for the tip on the app alfaobd, I looked into it, looks like just what I need, I’ll use my sons android tablet, I already have a obd2 device, and I saw a guy on YouTube use it with the app. It’s only around $50 so I’m gonna get it, and toy around with it. I’m very new to this forum, so...
  6. B

    Front brakes dragging

    No codes, no dings, nothing unusual, I did replace the wheel hub assembly, and no change in brake drag, I’ll inspect the wires tomorrow. I did replace the master cylinder, did bleed all brakes, and front brakes are still dragging, the abs pump is 2 parts, module and pump, I can get both parts...
  7. B

    Front brakes dragging

    I have a 2010 ram 4x4 I noticed the front rims was getting hot, so I jacked up the front end, both front tires are hard to spin by hand. So I suspect frozen calibers or a bad rubber brake line off the caliper. I was told to break the bleeder open and see what happens, both bleeders broke off. So...
  8. B

    Front driveshaft question

    I replaced both wheel hub assembly.
  9. B

    Front driveshaft question

    I have a 4x4 so the front driveshaft from transfer case to front dif, I uploaded a pic and circled where there is movement, I’m just curious if there is a bearing in there, that is bad, I’m getting some roaring noise above 20 mph, sounds like it’s coming from front of truck, I rotated tires...

Latest posts

Members online

Total: 784 (members: 29, guests: 755)
Robots: 1,566

Forum statistics

Threads
195,486
Posts
2,870,929
Members
156,207
Latest member
txram956

Share this page

Top