Search results

  1. dirtyUPSman

    Driver's side interior light dead. Easy or cheap to fix/replace ?

    I'm looking at a 2015 1500 sport crew cab. I noticed that the interior light on the driver's side is dying and literally useless. This will BUG me to no end. I'd like to know what I'm looking at as far as repair or replacement will cost. Can the unit be takin out and replaced or like the whole...
  2. dirtyUPSman

    Single valve y-pipe cutout VS two valve Y pipe cut out.

    It wasn't an easy decision to make but I went with shorty headers keeping the original cats and went with an aftermarket split exhaust. Yes I know there is little gain w shorties and I wld be better off w long tubes but like I said a decision needed to be made. I am interested in getting rid of...
  3. dirtyUPSman

    Single valve y-pipe cutout VS two valve Y pipe cut out.

    Yeah fully aware that there is no power gain. I got a new cam, tune and torque converter for that. Now I want a bit more rumble at the light. I was just looking to see if anyone has experience with the two value cut out. My one thought was it might sound a bit more louder if the pipe to the...
  4. dirtyUPSman

    Single valve y-pipe cutout VS two valve Y pipe cut out.

    So I decided to put a cutout on my exhaust. While researching for a product I came across two styles. The traditional one valve cut out, where when the valve opens for the dump, some exhaust still goes to the muffler and tailpipe, and a newer two valve cut out, where when the dump valve opens...
  5. dirtyUPSman

    Let's see those white RAMs

    Love those rims. 20's ?
  6. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Starting at 7 Grand, that's actually not a bad price at all.
  7. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    My pocketbook would probably be more in the range of used or rebuilt if the cost of a rebuild wasn't too much or if it wasn't too far from New then I guess I would go new. At least the PCM would just need a tune and not to be replaced.
  8. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Not sure what a 6.4 wld cost plus, install also wld I need a new CPU? So far I've only got about 850 bucks or so into it with Shorty headers, cat back system and Vera Ram air Grabber Cai. I got my throttle body for free so that was a bonus. The brake shop estimated $750 for rotors and pads all...
  9. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Actually I believe it is rated at 395 with 410 lb of torque. But I think that is at the flywheel and not RWHP. But I'm a novice and I definitely could be wrong. However I did read someone mentioning about 290-320 horsepower at RWHP for stock.
  10. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    You know I heard the same about the stock fan w the 180 therm. The tune shld take care of the fan settings and temp. Maybe I'll will wait and see. Thanks.
  11. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Thanks !
  12. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    @BadHemi2014 Love that set up. Where did u get it from?
  13. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Yes 8spd 2wd. Is your truck lifted? Guy who took my test said tires effect whp but i dont know?? I have stock 265/70/17s . I want to get something that grabs a little better.
  14. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    2wd, 3.21 gear ratio
  15. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Thank for your help with the input. I want to do the cluch fan delete, and efan swap. I also have a 180° therm in hand just need to swap it out at work. How much did u pay for the fan, got a link?
  16. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    I WISH my truck had the 6.4 ! Cuz, yes i know camming the 5.7 wont be enough for me. Lol But I know I'll absolutely love my build.
  17. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    Yep stock. Swapping the cam w a Texas speed cam. I wanted to get my heads ported but have to wait for that.
  18. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    I did consider long tubes. Trust me I really wanted a pair. However, a few factors made me go w shorties. I wont go catless. Failed a emission test once because of that. So after that I keep it legal. Yes I had to consider the cost of a new cat system and compared to a cat back dual exhaust from...
  19. dirtyUPSman

    Base Dyno pull, 311.6hp @5500, Mx Tq 324.4 @ 4550 . Honest opinion.

    So here is my first Dyno Run to see my horsepower on my 2017 Ram 5.7L Current mods are VeraRam Air grabber cai, BFC wrapped shorty's, aftermarket cat back from single to dual exhaust, 90 mm throttle body. 311.6 horsepower at 5,500 RPM and maximum torque 324.4 at 4,550 . My future mod is a...
  20. dirtyUPSman

    Torque converter before the camshaft??

    Okay so I'm doing a camshaft swap from stock to a stage 2 cam by Texas Speed. I found a shop to do the swap for me, they told me its goin to be upto a 3 week wait to get my truck in, which im fine with. Im also planning on swapping out my converter w/ a 3400 stall one. My question is, will it...
  21. dirtyUPSman

    392 injectors for 5.7L

    Inside the air cleaner- that's ingenious! I have a 17' Tradesman and was sold as a fleet vehicle. It came with the ugly steel 17" rims, with 265/70R/17 tires. They're very much near the end of tread life and i want to get something that will grip better but don't know where to start. I didnt...
  22. dirtyUPSman

    392 injectors for 5.7L

    Pretty slick hiding that bottle in the suitcase . Plus hiding the lines w hockey tape making it look like factory wires is a nice touch. You definitely have nice rides. I especially like ur truck's rims. What size are they ? I was thinking about putting "sleeper" on the back of my cap, you...
  23. dirtyUPSman

    392 injectors for 5.7L

    Admit it ??? Hell I'm proud of the sound my truck makes. I slow down before a bridge or underpass so i can PUNCH IT ! I cant wait for my cam and tune. Im 51 and had open heart surgery in 2017, then lost my father in 2018. After those events I realized life's way, way too short. I got some...
  24. dirtyUPSman

    392 injectors for 5.7L

    Wow, those are some SERIOUS times ! Thanks for the link. I didn't know the NOS kit was that affordable.
  25. dirtyUPSman

    392 injectors for 5.7L

    She's a sled w a bed cap on the back. I got her so that I can put my two man boat in the back and close the cap. This way when it rains overnight my boat will be dry in the morning. I don't expect to win any races against Camaros or Mustangs. I'm just trying to get to the lake quicker. LOL I'm...

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,292 (members: 60, guests: 1,232)
Robots: 1,735

Forum statistics

Threads
195,456
Posts
2,870,499
Members
156,166
Latest member
seems fishy

Share this page

Top