Search results
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
Got some footage of the rear axle accelerating from a stop, does look like it is moving a little. I just don't know if that is a normal amount of axle wrap or not. I feel like this is not my issue based on how little it moved though. Axle Wrap?- Abrams117
- Post #10
- Forum: Engine & Performance
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
After watching my footage some more I beginning to wonder if my rear suspension for whatever reason is allowing the axle/pinion angle to shift on acceleration causing my shudder and then shifting again on coast/deceleration causing the rumble/clunk noise. I think I'm gonna get some footage with...- Abrams117
- Post #9
- Forum: Engine & Performance
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
I haven't taken the shaft off yet but with the digital angle finder I got today, I was able to get measurements that were within a degree of each other. I did get some video of the acceleration shudder though, you can see the whole powertrain shaking on take off from a dead stop. Acceleration...- Abrams117
- Post #8
- Forum: Engine & Performance
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
Think I'm gonna buy an actual inclinemeter. I was using an app on my phone (with driveshaft attached) and am not sure I have accurate readings. Pinion angle - 4.8° Driveshaft angle - 14.6° Transfer case - 3.2° (I went off of the flat seal) Gonna grab a digital angle finder from lowes...- Abrams117
- Post #5
- Forum: Engine & Performance
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
The shop did check the angles and said they were good. I do have adjustable control arms upper and lower from Core 4x4. I'm tempted to take it to a Jeep shop to see what they can do. Interesting enough there was a whine at 60mph and above which is gone now after the rebuild but the clunk is...- Abrams117
- Post #3
- Forum: Engine & Performance
-
Anyone have a custom rear driveshaft made for a lifted 1500 RCSB 4x4?
Curious if anyone has ever had custom shaft made for the rear of a lifted 1500 regular cab short bed 4x4. Mine has the 5 inch rear lift springs from Zone on it and I have been chasing down a clunking noise since it was lifted. I had a shop diagnose it and they supposedly found that the rear end...- Abrams117
- Thread
- Replies: 10
- Forum: Engine & Performance
-
6" Lift for Ram 1500 Regular Cab Short Bed Concerns
Think it turned out fine. Alignment shop did it and I think the core upper arms are adjusted all the way in so they didn't have to mess with it lol. -
My Lifted Regular Cab Short Bed Build
Yeah, I think I'm gonna have that done eventually. Was hoping the front end would settle lol. An inch lower would probably be perfect. -
My Lifted Regular Cab Short Bed Build
Mainly wanted to match the rear arms lol. -
My Lifted Regular Cab Short Bed Build
Got my 2022 Classic RCSB lifted recently. - 6" Zone kit with 5" rear springs and Fox shocks. Originally had the 3" rear springs but it ended up being way nose high with the coilovers. - Fox Factory Race Series 2.5 DSC Coilovers on the front that I think are giving me 8" of lift, may eventually... -
Bed Mounted Spare Tire Carrier
Anyone know of a decent bed mounted angled spare tire carrier that can hold a 37? Or maybe even one that could be retrofitted for a Ram bed. -
'22 ram 1500 classic
I'll be getting my regular cab lifted at the beginning of May so I could post a picture around then lol. I'm gonna be running 17x9 wheels with 37" tires though.- Abrams117
- Post #2
- Forum: General Discussions
-
Core 4x4 Install Instructions
Here soon I'll be having the Core 4x4 rear control arm and panhard bar set with johnny joints on one end as well as their front upper control arms with the FK rod ends installed with my lift kit. Was wondering if there are any special install instructions I should provide to the shop.- Abrams117
- Thread
- Replies: 0
- Forum: General Discussions
-
2022 Ram 1500 Classic Tire Size Calibrator
Nope, nothing yet. Kinda just waiting for the Tazer to work on the 2022's. I emailed them about a month ago and I was told their engineer was working on it and to check back in a month or 2. -
2022 Ram 1500 Classic Tire Size Calibrator
Gonna be lifting my truck with larger tires in a few months, anyone know of any tire size/speedometer calibrators that work on the 2022 model year 1500 Classics? Z Automotive says their Tazer RAM doesn't currently work with the 2022s. Most of the other brands I see show similar things I think. -
6" Lift for Ram 1500 Regular Cab Short Bed Concerns
I took a look at the Core 4x4 stuff. You think maybe I should buy all 4 rear adjustable control arms or just the lowers? Or maybe even the full kit with an adjustable track bar? I wonder if there is even enough room for adjustment to get the pinion angle correct. -
-
6" Lift for Ram 1500 Regular Cab Short Bed Concerns
Got a 2022 Ram 1500 Classic Reg Cab Short Bed that I'm considering doing a 6 inch coilover lift on in the future. I've read contradicting things about lifting reg cab short beds because of drive shaft vibrations. Seen many posts on here of succesfully lifted ones but have read on Superlift's... -
UPR Catch Can drain plug stuck
Just got my UPR catch can delivered and I ordered it with the drain line kit. My problem is that the drain plug on the bottom of the catch can that I need to remove to install the drain line kit will turn the bottom piece of the can when I try break it loose. Can't get a grip on that lower piece...- Abrams117
- Thread
- Replies: 6
- Forum: Engine & Performance
-
2022 Ram 1500 Classic Morimoto XB Fog Light Bracket Install Problem
That is what I ended up doing. Just gotta get Morimoto to respond so I can hopefully return them. If not, then maybe somebody with an earlier 4th gen might buy them. -
2022 Ram 1500 Classic Morimoto XB Fog Light Bracket Install Problem
I'm trying to install these Morimoto XB LED fog lights on my 2022 Ram Classic Express and the brackets that I am supposed to reuse off of the stock fog lights do not work right with the Morimoto ones. The part where the fog light is supposed to pivot for adjustment is held on with a small torx...
