Search results

  1. Theair98

    Hemi tick 2.0

    I'm 100% sure bent strap was installer derived. I installed those plugs shortly after I got the truck. They are NGK plugs. I also came up with 1 different coil pack. Odd. I had 8 matching coils when I took it for cam work. Mechanic a real piece of work. Won't ever go back to him. If you screw...
  2. Theair98

    Hemi tick 2.0

    Just got it done. Problem solved. More qustions raised. Cyl 5 plug electrode ceramic broken and dropped. Cyl 4 electrode bent with about 0.080 gap.Wonder how that happens....hmmm? Chug is gone. Creeps easy when I let up on brake.
  3. Theair98

    Hemi tick 2.0

    Big picture....5 grand beats 60 for a new truck. Can't afford that.
  4. Theair98

    Hemi tick 2.0

    I believe they were oem Mopar lifters. It's either number 4 or 6. I have a feeling a short block is in my future. If I lose a second cam, that would be way too much metal thru the internals.
  5. Theair98

    Hemi tick 2.0

    Thanks for the reply. Guess I better get started pullin plugs.
  6. Theair98

    Hemi tick 2.0

    Update: 400 plus miles on engine after Lubeguard. Still have a Singer under the hood. (old reference for you younger kids). I got a CEL at idle last weekend, so I cleared it, rest the connector, and it hasn't come back. The problem I am feeling, is a chug at idle and under load. If I am at a...
  7. Theair98

    Hemi tick 2.0

    Thanks for the encouragement. I have about 200 miles on it post Lubeguard. I guess I will try to be patient and wait. Maybe after a couple oil changes, it will subside. Anyone using synthetic 5W-30 Valvoline or other namebrand oil in their MDS hemi? I know Dodge says not to, but....
  8. Theair98

    Hemi tick 2.0

    Update. Tick is back at idle, driving down the street, cruisin at 55. Only quiets down when MDS active. This makes me think there is a solution. I just don't have it. I realize those lifters bleed when MDS kicks in. So they get quiet. Anyone speculate or know what goes on internally when the...
  9. Theair98

    Lubegard for motor oil ... so far so good.

    Awesome!! Thanks for the reply!
  10. Theair98

    Lubegard for motor oil ... so far so good.

    A stupid question beats a dumb mistake, I just added some Lubeguard and it helped after just a few miles, so far. (40 miles) Still a slight tick. Am I supposed to use a bottle of this every oil change? I get the plating aspect. Just want to keep adding it, if it will further protect my engine...
  11. Theair98

    Hemi tick 2.0

    Small burnout. TCS limited my fun. A benefit of living in the country. And tires ain't cheap.
  12. Theair98

    Hemi tick 2.0

    Fun fact...the mechanic is a retired Mopar trained mechanic. You just never know who to trust. That's why I will be doing my own wrenching from now on.
  13. Theair98

    Hemi tick 2.0

    That bolt was probably broken by the mechanic who changed the cam and lifters x 2. Came out with a lil luck and a pair of surgery forceps. Luckily. Hard to prove, but it was my first time in there.
  14. Theair98

    Hemi tick 2.0

    That wire trick would work. I tried to get some assembly lube on my way home the other night and some guy beat me to the last tube by about 10 minutes, so I used #2 Mystic grease to hold them in place. Also greased the new shaft and rockers with it to avoid a dry start scenario. I realize it's...
  15. Theair98

    Hemi Tick? Very frustrated

    Sorry about your truck. That video sound exactly the way mine did. If I closed my eyes, I would have thought I was listening to my truck. I had 120,000 on my MDS 5.7. Had cam and lifters replaced after I bought it. Flat lobe #1. Had 2 sets (supposedly) of lifters on right bank replaced. Still...
  16. Theair98

    Hemi tick 2.0

    Ok, update time. Replaced 4 rocker shafts with new ones. Reused my pushrods as one of the new ones I ordered was missing the ball end. Put it all back together with no pocket pieces, and it actually started and ran. It was my first dive into this motor. On start up, slight tick which had...
  17. Theair98

    Hemi tick 2.0

    I'm pretty sure I am using the wrong term for the broken part. It it the square piece that sits on top of the shaft and the bolt goes thru it. I also noticd in my pic that the wear pattern is overlapped by the washers, meaning there was either contact with the rocker, and or a geometry alignment...
  18. Theair98

    Hemi tick 2.0

    Here's a couple photos of what I found. Looks like I'll have 9 exta mounting pads when I'm done.
  19. Theair98

    Hemi tick 2.0

    One more question....if that mounting pad is missing, would that affect the oil distribution in that shaft? My mind says the oil will flow out and around the bolt and washers my former mechanic put in place of the broken pad. That would reduce the pressure in the shaft and cause problems. Sound...
  20. Theair98

    Hemi tick 2.0

    Hello all. New to this forum. Keep it short. Bought 2012 Ram Sport. Had bad cam/lifter. Had them replaced. 20,000 later, more noise. Replaced lifters. Retainers had come off of 2 of them. 10 times louder! Another set goes in. Not as noisy. Went on 1100 mile trip. Still noisy. Tore valve cover...
  21. Theair98

    New member

    The cam was replaced. The valve springs looked ok, to my knowledge. Just drove it to Wisconsin to go snowmobiling and put the 500 miles on it. Still a tic. Going to replace all four rocker shafts and pushrods. It's due with 120,00. I will figure this out. Eventually...
  22. Theair98

    New member

    Hello all. Just joined the group and have several issues to iron out. I have a 2012 Ram Sport i bought two years ago. It came with a flat cam ( surprise to me :mad: ). So 3 grand later I have a decent running truck. That was 20,000 miles ago. I just had to replace the passenger side lifters. Got...

Latest posts

Staff online

Members online

... and 23 more.
Total: 1,213 (members: 73, guests: 1,140)
Robots: 1,544

Forum statistics

Threads
195,443
Posts
2,870,355
Members
156,154
Latest member
RedRAMr

Share this page

Top