Search results

  1. tnctx02

    Help needed - add power driver's seat

    Got complete set of seats off Facebook for my 2013 Tradesman. Did not look till I got home, but the driver's side seat is powered. What do I need to do to get it working so I can adjust it from me to when my girlfriend drives it? Thanks in advance! Any help will be greatly appreciated.
  2. tnctx02

    Anti-Lock Brake System Module

    Benny, I have the ABS light on my EVIC and found code C2200 on my 2013 Ram Tradesman. Can you help me find a part number? Thanks for the help.
  3. tnctx02

    OEM connectors and terminals

    Has anyone found a list of OEM connectors and terminals for the 4th gen Rams? Thanks for any help
  4. tnctx02

    2013-2018 Ram Auxiliary Switch Relay Connectors

    I am looking for the male and female connectors for the auxiliary switch panel. No one has the complete kit to purchase so I am going to make my own but I need the 2 connectors to make it work. I got a waterproof fuse/relay box on the way and have the auxiliary switch panel here now. Anyone...
  5. tnctx02

    Replaced Evaporative Emissions System Leak Detection Pump

    I have 2 codes for a very small leak so I did some research and changed the Evaporative Emissions System Leak Detection Pump on the gas tank. Now my fuel gauge is not reading correctly. The tank was full now it shows half a tank. Just to make sure I went to fill it up. It took 1 gallon. Has...
  6. tnctx02

    TPMS SENSORS

    I have been through 3 sets of sensors and the back 2 tires always come up as not reading. The tires have been rotated and the back 2 tires still do not read. Could this be the RF Hub itself? Any help or suggestions will be greatly appreciated.
  7. tnctx02

    Poor acceleration

    Firstly, I own a 2013 Ram Tradesman with the 4.7L engine. I inherited from my father. It has a few issues I am working on. I don't have much money at the moment, going through a divorce, so I am hoping with all the experience here someone can help figure this out. It accelerates so slowly and...
  8. tnctx02

    RAM 1500 Tow Mirror Hardware Kit

    I need the mounting kit to put my tow mirrors on my 2017 ram. Can you help me out?
  9. tnctx02

    2013 Ram Tradesman 1500 Roof Overhead Console

    I looked through the forums and did not find an answer that helped me with my project. I want to add the overhead console with map lights and compass. Does anyone know where I can get the harness to power it correctly? Maybe the dimensions of the hole to cut also would be great if anyone has...
  10. tnctx02

    2013 Ram Tradesman

    I inherited this truck and have upgraded to the 8.4 NAV radio along with the premium EVIC. The truck has no GPS I found out. Can I get the roof mount and just add it, or is there something else that needs to be done for the NAV to work? Thanks for any help!
  11. tnctx02

    Upper Glove Box Kit

    I am looking for a 2013 RAM 1500 UPPER GLOVE BOX LID COVER KIT DIESEL GRAY. I am needing the lid, bin, striker, and screws. Thanks for the help!!
  12. tnctx02

    Needing some parts to add mirro with mics for handsfree

    Want to see if you can get these.... RA2 style Manual Dim Mirror w/mics: - 68102484AA Man. Mirror Mount Covers: Upper - 1ZA38DX9AA & Lower - 1YW11DX9AA Mirror Header harness (Standard/Autodim): - 68207372AB Thanks for the help. Thomas
  13. tnctx02

    Ignition key to FOB

    Has anyone changed their ignition key to a fob? I want the fob to add my remote start and to not need a key in the ignition switch. Any help is appreciated!
  14. tnctx02

    Trusted shop to do lift install

    Anyone down in the San Antonio area that knows a shop they trust to do a good lift install. After 2 years I am gonna pull the trigger soon and buy my 6" Zone Suspension lift. Right now I have a BDS 4". Can get the lift delivered to my house for about $1600. Wife wants me to have it installed in...
  15. tnctx02

    8.4 Radio Bezel color change

    Have tried to do a carbon fiber wrap on my radio bezel and did not work out too good. I need lots more practice it seems with the many angles. Any one painted or done something else that worked to change to color of the radio bezel? Just want to make mine more custom to my truck. Any input...
  16. tnctx02

    Coil Pack upgrade

    I am going to change my plugs and coil packs at the same time since I have to remove the upper intake to change the right bank. Has anyone used either the MSD or RIPP coil packs? Other than price I have not found alot to make me decide one way or the other yet. Any input will be appreciated.
  17. tnctx02

    2017 RAM 1500 KEYLESS REMOTE FOB

    My spare remote tip start for my truck is not working. After 4 batteries I am fairly sure it is dead. Anyone have a place they have bought replacements from that worked and got a good price on? Best price I have seen for an OEM is right at $50. I have looked all over the remote, inside and out...
  18. tnctx02

    2015 Ra3 Vp3-NA (non-nav) 8.4 Radio

    Radio works good. Upgraded to VP4 radio and would rather sell it here to someone who will use it. Asking $150 plus shipping. It is updated to newest software, 18.45.01 SW Update. Unlock code is on the radio. All boxed up, waiting for your address. Thanks for looking!
  19. tnctx02

    2015 Ra3 Vp3-NA (non-nav) radio

    Radio works good. Upgraded to VP4 radio and would rather sell it here to someone who will use it. Asking $150 plus shipping. It is updated to newest software, 18.45.01 SW Update. Unlock code is on the radio. All boxed up, waiting for your address. Thanks for looking!
  20. tnctx02

    Add amp to 2017 Ram 8.4 radio

    I didn't see a thread for this so I am posting this. Sorry if I missed it somewhere. I want to add an amplifier to my 2017 Ram that I just added and 8.4 RA3 radio to. Any help will be greatly appreciated.
  21. tnctx02

    Add an amplifier to 5.0" Touchscreen stereo

    Anyone have experience adding an amplifier to the stock 6 speaker system and stereo? Recommendations on the best amp to install?
  22. tnctx02

    Door Speaker Replacement

    Just some quick pictures of my 6x9 door speaker replacement My new Rockford Fosgates Door trim pieces removed As simple to remove as I had read The adapters fit perfect
  23. tnctx02

    UCONNECT® 3 WITH 5-INCH TOUCHSCREEN back up camera

    Will the UCONNECT® 3 WITH 5-INCH TOUCHSCREEN work with a back up camera?
  24. tnctx02

    Replace Auxilary switch panel

    Am looking to replace the factory aux panel with the traction control and tow/haul switches to one with the extra switches underneath them. Does anyone know what the difference between one for a 1500 and 2500 is? I found this: INSTRUMENT PANEL - SWITCH 68231819AC - Mopar (68231819AD)) It is...
  25. tnctx02

    Change gear ratio on rear axle

    Installed a BDS 4" lift with 35" BFG tires. Factory rear gear is 3.21. Been trying to decide if changing the rear gears to maybe 3.92 would be the way to go now. I have the 3.6L V6 in the truck. Appreciate any and all help with this.

Latest posts

Staff online

Members online

... and 21 more.
Total: 1,515 (members: 71, guests: 1,444)
Robots: 1,570

Forum statistics

Threads
195,581
Posts
2,872,085
Members
156,353
Latest member
shpak

Share this page

Top