Search results

  1. Yamifz1

    Transmission troubles with codes

    They showed up after I refilled the tranny and went for a drive. If I clear them I believe that they all come back, or at least P0933 comes back for sure
  2. Yamifz1

    Transmission troubles with codes

    Need some help fixing an issue, so here is the story.... I was leaving home, I was about 2 miles from home and come to a stop and feel my tranny push or downshift hard after stopping. I leave the lights and shortly after that the truck shifts into 3rd and revs really high. I stop and realize...
  3. Yamifz1

    P0740 Code help

    so I noticed today that there was a couple of small oil stains in my driveway, hard to tell if it's transmission fluid but it may be as I believe I have had a very slow leak in my transmission cooling line for a while now (been meaning to fix it but it has been so little) It appears that things...
  4. Yamifz1

    P0740 Code help

    In the last few days I have been getting a P0740 code "torque converter solenoid open" I can shut off the truck and reset the code using my Diablo but after a day or so it will come back. So this leads me to believe that it is a faulty switch but I'm not sure. However today I was on the highway...
  5. Yamifz1

    Put some decals on a few weeks ago. I think they turned out pretty good.

    Good job, they look great.
  6. Yamifz1

    how to..remove headrest covers..do you know?

    So I finally got the headrest back and I think they look great. So taking them off is a struggle but if you are careful they will come off without ripping them. I thought the tough part would be installing them, but, I used the bag trick and a good vacuum and they went on quite nicely. Her is...
  7. Yamifz1

    Mopar badge?

    I think their site is down these days and you have to get a hold of them through facebook.
  8. Yamifz1

    5" exhaust tip question

    I spoke to that vendor the other day and he told me that the sales they have are for 1 tip only. So double that price.
  9. Yamifz1

    tired of looking...exhaust tips

    Hey Nick: I will likely take you up on the offer on the Carven tips but it will have to wait until the new year, with Christmas just around the corner.
  10. Yamifz1

    Engine Cover and Engine Bay Dress Up

    David is right, now that I have it in the truck I think a small section cut out for the hood prop would be advisable.
  11. Yamifz1

    Looking for 5'' Carven Tips, Black, Straight cut

    Spencer, saw these here today. http://www.ramforum.com/f22/wtb_carven_black_tips-108818/
  12. Yamifz1

    Engine Cover and Engine Bay Dress Up

    So just put the cover on, will have to move a few wires around to clean it up but I think it looks good.
  13. Yamifz1

    Engine Cover and Engine Bay Dress Up

    So I got my battery cover back from the machine shop, I'm quite pleased with the job they did. Last night I put some carbon fibre in it and now I just have to install it. I think it turned out quite good.
  14. Yamifz1

    tired of looking...exhaust tips

    There are quite a few good options here, I will continue to look as there is no real rush, what with Christmas coming up. Price is an issue especially at this time of year and being in Canada that just hikes the price up even more due to exchange and then crazy shipping prices on top of it all.
  15. Yamifz1

    tired of looking...exhaust tips

    Thanks Hawkman, I thought it was a 2.5" inlet but wasn't sure. Now to find a nice black tip that will add to my ARH headers and muffler, already sounds great but just want to add a bit of a deeper sound and get rid of stock tips.
  16. Yamifz1

    tired of looking...exhaust tips

    I want to replace my 4" stock exhaust tip with some 5" but I don't want to order the wrong size so I would appreciate some help. I looked all over and I can't seem to find what the stock exhaust tip inlet size is, is 2.5" or 3.0"? any help would be appreciated. Also a length of the stock would...
  17. Yamifz1

    how to..remove headrest covers..do you know?

    That's an tip, thanks!! I'm sure it will make my life much easier. I've also seen doing the same thing and then taking a vacuum and sucking the air out of the bag which also sucks the air out of the foam thus making the size of the foam shrink.
  18. Yamifz1

    how to..remove headrest covers..do you know?

    Thanks a lot, I will have a closer look at them.
  19. Yamifz1

    Stainless Steel Flexible Hoses..have them??

    Most definitely but it is unlikely due to the 2 different sized ends.
  20. Yamifz1

    how to..remove headrest covers..do you know?

    I'm looking to have some work done to my headrest covers and I'm not sure how to remove them. I had a quick look and the only way I can see is to cut them at the bottom (which I would prefer not doing) so any help would really be appreciated. The reason I ask is that I want to have the MOPAR...
  21. Yamifz1

    Stainless Steel Flexible Hoses..have them??

    I bought a pack of stainless braided hose covers for my truck and started with the rad hose, what a pain in the ass, I only got half way done the hose and the braid was jamming up and pulling away from the other end. I may have done something wrong as it was suppose to fit but this is why I am...
  22. Yamifz1

    Mopar badge?

    I really like the first one for the grille but are you looking for a grille badge or one to replace the stock ram head badge? I have replaced the stock ones with these, they may be what you are looking for. I got the from rebadge.
  23. Yamifz1

    Engine valve covers

    Those are pretty cool, they will look great once installed. I finally decided and ordered a set from 3G, looking forward to getting them.
  24. Yamifz1

    Stainless Steel Flexible Hoses..have them??

    Hipps, those are nice. I've been looking at the silicone hose as well but think the stainless are the way to go for me. I can get them in blue which will go with the rest of the under hood mods. What are the things with the circles on your firewall, are they lights??
  25. Yamifz1

    Stainless Steel Flexible Hoses..have them??

    Hello: I am looking at putting new hoses in my truck, in particular the rad hose.I have done some reading but i'm not quite finding out the information that I really need. I know the hose in the 2010 is 47.18" long with one end being 1 1/2" and the other being 1 3/4" , but what I'm not really...

Latest posts

Staff online

Members online

Total: 633 (members: 25, guests: 608)
Robots: 1,464

Forum statistics

Threads
195,486
Posts
2,870,933
Members
156,207
Latest member
txram956

Share this page

Top