Search results

  1. Canadiancur_101

    HD Exhaust Tip

    I already had the 14” magnaflow muffler replacement, but was just looking for a little extra growl and I’d say it’s actually a bit too much for me. I find it sounds cleaner but lots of drone.
  2. Canadiancur_101

    HD Exhaust Tip

    Not a good pic but it’s the only one before I cut the resonator off.
  3. Canadiancur_101

    HD Exhaust Tip

    You’ll need to find one with a 3.5” inlet. I know mbrp makes a couple. I bought a cheaper rbp tip which is adjustable, but I wouldn’t recommend it as it had a bit of a rattle to it.
  4. Canadiancur_101

    6.4 Hemi Catback?

    I had the same issue with mine, couldn’t get the clamp tight enough to seal it up and keep the tailpipe from moving. So I put the second provided clamp right in front of the stock one and tightened it right up. No problems since.
  5. Canadiancur_101

    6.4 Hemi - Aftermarket exhaust recommendations?

    Magnaflow just came out with a direct fit muffler. I just ordered one so not sure how it sounds in person, but I was looking for the same kind of thing. I believe it’s #19493
  6. Canadiancur_101

    What did you Trade in for the new one?

    I traded my 2018 1500 sport for the new rig. Always wanted a power wagon
  7. Canadiancur_101

    5" black tips in Canada

    I ordered a muffler and tips from carven in the states. A bit pricey but I’d go with them again in a heart beat. Another option would be something like this I did the same thing on my 13 bighorn. Turned out good.
  8. Canadiancur_101

    How should I make it louder

    5” tips along with the resonator delete will make a big difference
  9. Canadiancur_101

    Alright guys.. BILSTEINS post your pics!!!

    Seems to be tons of room. I’m pretty happy with how it turned out.
  10. Canadiancur_101

    Alright guys.. BILSTEINS post your pics!!!

    Finally got mine done. Set at 2.8” and looking to put icon rear springs in down the road. 35x12.5’s on 20x9” 0 offset
  11. Canadiancur_101

    35s and leveling kit -19 offset

    When I had my 2500, I had a 2.5” level and ran 35’s on 20x10 -24 offset and they rubbed pretty good until I cut a chunk out of the plastic fender liner.
  12. Canadiancur_101

    2018 PW Incoming!!!

    How was your fuel mileage?
  13. Canadiancur_101

    2018 PW Incoming!!!

    What made you go from the cummins to powerwagon? I’m tempted to do the same, just not sure if I’d like it as much as I think.
  14. Canadiancur_101

    All terrain tires?

    I’ve had 2 sets of toyo a/t 2 extremes and they are by far the worst tires in the rain that I’ve ever had, I’ve read a lot of good reviews on the Cooper at3’s so I just bought a set of them to try for the winter and so far they’re far better in the rain, and quite a bit quieter.
  15. Canadiancur_101

    granite crystal and anthracite plastidip

    Would you bother trying to do your bumpers? I always wondered how it'd match up.
  16. Canadiancur_101

    Vinyl flooring - still get floor mats

    I just used my weathertechs from my last truck, they fit fine and don't seem too move at all. Makes keeping the vinyl clean a lot easier.
  17. Canadiancur_101

    TOYO M/T long term review (updates frequently)

    I was wondering about that, but I guess that's to be expected. I'm sure it being an m/t and narrower would make all the difference in the world. Just looking for something with better tread life and to not have to worry about sliding around or getting stuck in anything more than a couple inches...
  18. Canadiancur_101

    TOYO M/T long term review (updates frequently)

    Thanks, that's exactly the kind of answer I was looking for. I think this is the route I'll be going too.
  19. Canadiancur_101

    TOYO M/T long term review (updates frequently)

    I'm curious to hear how you like them in the snow? We're getting hammered and this will be the last set of at2's for me. Do you have any pictures yet? That's the exact size I'm looking at too, I'm torn between these and cooper stt pros.
  20. Canadiancur_101

    2 inch level and 37s?

    From everything I've seen, it's just a little bit of the plastic. No problems with the bumper.
  21. Canadiancur_101

    2 inch level and 37s?

    I've really been looking into putting 37's on my truck. From everything I've read, it doesn't matter if you're stock height or levelled. You need a 9" wide wheel with a positive offset +18 to +30ish and a back space of 5" or more. With a bit of trimming to the pinch weld at the back of the...
  22. Canadiancur_101

    Wheels for Granite Crystal paint?

    Not the greatest picture of mine.
  23. Canadiancur_101

    Where to mount an Arb compressor?

    Since you have a crew cab, would it fit in the cubby thing in the floor of the backseat?
  24. Canadiancur_101

    show me your steps

    Mine are rough country. They look pretty close to the nfabs and stuff, Seem well made.
  25. Canadiancur_101

    Post up your Granite Grey/Gray Rams

    Lol ya I saw them and jumped on them

Latest posts

Members online

... and 14 more.
Total: 1,376 (members: 64, guests: 1,312)
Robots: 1,949

Forum statistics

Threads
195,613
Posts
2,872,565
Members
156,437
Latest member
Ryanbuddy1

Share this page

Top