Search results

  1. aIIan

    Do you guys think all Gen 3 5.7L Hemi engines are doomed for lifter/cam failure?

    Mine (14) started chirping pretty bad at idle @ around 70k. Rolled over 100k last month and she hasn't blown yet. What is the easiest / cheapest tuner one can use to raise the RPM at idle with? 5% is an acceptable number until you realize that most folks aren't taking their trucks to the...
  2. aIIan

    Troubleshooting dead low beam.

    Now the other side is out too. What are the odds that both would die in the same week.
  3. aIIan

    Troubleshooting dead low beam.

    Wondering if you had any tips on how to trouble shoot a dead low beam. Trying to figure out if I need a new bulb or a new ballast as well. Thanks.
  4. aIIan

    Dyno results

    Probably whatever horsepower is in Russian.
  5. aIIan

    Ease of spindle lift installation?

    Thanks man, it looks like the weather gods have other plans today though :banghead:
  6. aIIan

    Ease of spindle lift installation?

    For those of you who have installed a spindle lift or have knowledge of the process how difficult is the install on a scale of one to ten? My 4" kit came in today and 'm wondering if I can tackle it myself. Reading the instructions it doesn't seem too difficult. Looks like I might have the...
  7. aIIan

    A little photoshoot of my Zone 4" + Bilsteins.

    Beautiful.
  8. aIIan

    What did you do with your 4th Gen this week?

    Yeah right, her big brother already has dibs. Truth be told she spends more time 'helping' with the mods than he does so we'll just see about that....
  9. aIIan

    aIIan's 2o14 BW 1500 Sport

    Got around to installing my bed rug this morning. Daddy tested, daughter approved.
  10. aIIan

    aIIan's 2o14 BW 1500 Sport

    Sorry, I just saw your post. I'll see if I can snap a pic tonight.
  11. aIIan

    What did you do with your 4th Gen this week?

    Got around to installing my bed rug this morning. Daddy tested, daughter approved.
  12. aIIan

    Installing HIDs in your 2013 OEM Projectors

    It's a pain in the ass with the short wiring but it can work. You just have to get creative.
  13. aIIan

    Hornblasters trainhorn

    I was thinking of squeezing a small kit under the hood where the airbox was. Anyone done that yet? Would the air temp. be too high for the tank?
  14. aIIan

    LED Upgrade

    The cargo lights are 921. The reverse lights are either 7440 or 921 I'm guessing it depends on whether or. Or you've got the LED taillights. I buy mine from VLEDS.com.
  15. aIIan

    Decided on lift / level . . thoughts?

    I stole this photo from another board member (012RAMbo) but this is what our trucks look like with approx. 4" of lift and stock wheels & tires, not too goofy imo.
  16. aIIan

    Gap when I reinstalled headlights

    I made sure mine were all the way down since I didn't think to check them before I took the lights out. There are two bolts (and a clip) that hold our lights in place: top and bottom. The bottom bolt screws into sort of threaded washer thing (I'm not very technical) that can screw up or...
  17. aIIan

    LED Upgrade

    Correct, all the lights under the dash and rear seats are funky LEDs on 13's and up. We'd have to get real creative to swap them out.
  18. aIIan

    LED Upgrade

    BUMP. I've got the same contraption and having all but one bulb a clean, bright 6k is driving me nuts.
  19. aIIan

    Bright White Express grille

    I'm about 1,OOO in and haven't noticed any chipping up front. The exhaust tips have faded to a dark grey though, I don't think Plasti-Dip likes heat.
  20. aIIan

    Gap when I reinstalled headlights

    I know we don't have the same headlights but I assume they mount into the same hardware. There's a nut/screw that the bottom bolts screws into that can be adjusted up or down. Check to make sure it didn't unscrew during installation.... mine did.
  21. aIIan

    Piecing together 4" lift, wheels and tires. (Maxtrac, CST)

    I bought a pair of the 1.5" BORA adaptors. After doing a little research it seems that 13+ trucks have lugs that are longer than 1.5". How the hell does one go about 'trimming' a lug?
  22. aIIan

    Piecing together 4" lift, wheels and tires. (Maxtrac, CST)

    PerformanceLifts.com - Truck & SUV Experts
  23. aIIan

    Piecing together 4" lift, wheels and tires. (Maxtrac, CST)

    How long are the studs on our trucks? Amazon has two 1.5" adaptors, one with 1/2" studs and the other with 9/16" studs.
  24. aIIan

    Piecing together 4" lift, wheels and tires. (Maxtrac, CST)

    LOL, I just bought the CST kit for $712, shipped. Not too shabby. How much more did the front tires stick out after installing the spindles? Should I order some spacers for the rear tires?
  25. aIIan

    aIIan's 2o14 BW 1500 Sport

    RetroShop HIDs are in, lows and fogs. Also received my inTune w/ the HemiFever tune and did that... fun times. Ordered a BedRug & CST 4" lift. Next up... wheels and tires. Woot.

Latest posts

Staff online

Members online

... and 11 more.
Total: 1,466 (members: 61, guests: 1,405)
Robots: 1,909

Forum statistics

Threads
195,613
Posts
2,872,553
Members
156,434
Latest member
deebeein

Share this page

Top