Search results
-
Any Bully Dog Opinions?
My opinion is... this thing sucks. Two or three updates and still doesn't work. When I contact them, they say they are still working on it with no luck. It's been about three weeks now. I should have went with a Smartyjr. Or maybe a Raceme. Very unhappy. :(- Dooner
- Post #3
- Forum: Engine and Performance
-
Edge Products 31106 Juice w/Attitude CTS Programmer
My Bully Dog GT 40420 does. I changed mine to match my slightly oversized tires. I need 75lbs in the fronts now.- Dooner
- Post #11
- Forum: Engine and Performance
-
Any Bully Dog Opinions?
No one uses the Bully Dog? I wish I would have known that before I got this one.- Dooner
- Post #2
- Forum: Engine and Performance
-
Any advantages with a K&N Drop in or intake on 2016 3500 6.7 CTD
In my opinion, the only thing you will regret with your choice is the gears. If what you wrote is right. 3.43's? I had a 2010 Ram 3500 DRW with 3.73 gears and with a drop in K&N and Smarty Jr. (no deletes), it pulled my 15k RV as fast as I wanted to go. And use cruise control. If I stayed a nice...- Dooner
- Post #10
- Forum: Engine and Performance
-
Any Bully Dog Opinions?
I installed the Bully Dog 40420 on my 2015 Ram 2500 6.7 Cummins. And I don't really feel much difference from when it was stock compared to the extreme tune. I know it is all up to date and installed properly, but the only thing I feel that changed is the no power added seems to be a lot less...- Dooner
- Thread
- Replies: 3
- Forum: Engine and Performance
-
Factory Radio Acting Up
Update: New radio does the same thing with the sound and volume. They want to replace the antenna and wire to see if that will do it. Now after a little snooping on Home | Dodge Body Builder's Guide, I find I nice little write up about the upfitter module interfering with the satellite...- Dooner
- Post #6
- Forum: Audio & Electronics
-
Finally done 4" SuperLift w/35" Trail Grapplers
I just have one in my album. It is the same one I have as the avatar. I want to get it washed up and put on my flares before I upload any more. -
Finally done 4" SuperLift w/35" Trail Grapplers
First off, great looking truck. I too wanted a lift, but not too high and stay with 35" tires. I used a Superlift 2 1/2" spacer up front and a Traxda 2" spacer in the rear. Then put on new 295/60/20 tires on 20"x10" wheels, and 4 Rancho 9000 shocks. It is perfect for me. I love it. After... -
Factory Radio Acting Up
One thing that I did forget to mention is that one day the radio, on satellite, stayed on acquiring signal for 1 1/2 hours. I had to shut the truck off and let it set and when I started it up, the radio worked. Well, it did that again, but this time I was about 2 blocks from the dealership. So I...- Dooner
- Post #5
- Forum: Audio & Electronics
-
Factory Radio Acting Up
I noticed it for the first time when I had the speed sensitive volume on, but turned it off to make sure that wasn't doing anything. Funny thing is, when the truck is stopped or going at a slow speed, the volume is fine. When I pick up speed is when it starts dropping. And when going down long...- Dooner
- Post #4
- Forum: Audio & Electronics
-
Factory Radio Acting Up
My 5.0 factory radio seems to be loosing something. It is fine when I am just sitting still, but when I am on the highway running about 65-70mph, the volume seems to start strong the goes down as if the amp is petering out. Then it may go up for a bit, then down. You can hear a strong bass feel...- Dooner
- Thread
- Replies: 5
- Forum: Audio & Electronics
-
RDS Auxiliary Fuel tank/Tool box
I was told that it is illegal to hook up an in-bed fuel tank straight to your original fuel tank or fuel lines. It has to be used with a manual pump and hose like at the gas station. I'm not saying anything if it is, cause that is the way I planned to do mine too. I guess what they don't see...- Dooner
- Post #6
- Forum: 6.7 Common Rail
-
2015 Tire Pressure Sensor Problem
I told the service manager at the dealership what you said about the cluster. He said you can't interchange the clusters because the computer wont recognize it. I am beginning to believe that the dealerships don't know squat about what will interchange. They told me I couldn't replace the... -
2015 Tire Pressure Sensor Problem
Cool. Thank you very much for that info. I will relay it to the service manager. Maybe they will try it. They really want to figure it out. :waytogo: :waytogo: :waytogo: :waytogo: :waytogo: :waytogo: :waytogo: :waytogo: -
2015 Tire Pressure Sensor Problem
Wow, I guess I am the only one. Maybe that is a good sign that the new truck won't do the same thing. I hope. -
2015 Tire Pressure Sensor Problem
Hello Everyone. I purchased a 2015 Ram 2500 4x4 on February 14th. The first problem started right at the beginning with the rear sensors not reading any pressure at all. The dealership service dept said that it was a known issue at the factory and they replaced all four sensors with an... -
Tuner and emissions delete
What if I want to leave the DPF as it is, but want to shut down and block off the EGR without removing it? Is this possible? My reason: Living in Texas, we have to go through a state inspection of the vehicle. Not emissions in the rural areas yet. If the DPF is not there, NO PASS inspection...- Dooner
- Post #8
- Forum: 6.7 Common Rail
-
Smarty Jr J67 ME software
I need to check again, but I thought I read on MADS site that the new file loader would make your smarty where it would not load the ME file. I haven't had time to go back and double check that. Just want to be sure before I try anything. You Smarty guys out there?????!!!!!- Dooner
- Post #5
- Forum: Engine and Performance
-
Smarty Jr J67 ME software
OK. Thank you greatly. Now I need to know if the software installer from MADS site will load this file into my Smarty Jr. I have never updated it since I bought it at the beginning of this year. If anyone has any info on this, I would really appreciate some help. And Thanks again NWRQC!!!!!!!!!- Dooner
- Post #3
- Forum: Engine and Performance
-
Smarty Jr J67 ME software
I have a smarty jr that has the older serial number that is compatible with the ME software. Does anyone have the ME software that they wouldn't mind sending me, or know whare I can get it? Thank you.- Dooner
- Thread
- Replies: 5
- Forum: Engine and Performance
-
Smarty Jr and Lift Kit (2010 CTD 3500)
Off the market. Sorry -
Newbie on Performance chips
I have a 2010 3500 Dually Ram, and recently decided to buy the Smarty Jr. I still have the DPF and EGR. Before I installed it, I had a lot of trouble passing someone on the highway. Now, NOT a problem. I have plenty of power. And MPG went up some too. The #2 towing seems to get the best MPG for...- Dooner
- Post #13
- Forum: 6.7 Common Rail
-
newbe
Not trying to be an ass, but just a little question. Does anyone think about adjusting the headlights lower when leveling the truck? I just hate at night coming head on to a leveled truck and the low beams are blinding me. Not trying to start an argument or anything. Just seems like leveling is...- Dooner
- Post #10
- Forum: 6.7 Common Rail
-
Any engine lights with you cai?
It is a K&N. And after about 100 miles and numerous starts, the light is out. Hopefully it was just a one time thing at the beginning. If it comes back on, I will report it to you guys.- Dooner
- Post #3
- Forum: General Discussions
-
Any engine lights with you cai?
Just curious if anyone has added a CAI on a 2010 and newer CTD and the check engine light came on. I love the new feel of the power and added fuel mileage, just hope the light doesn't mean much. Dooner- Dooner
- Thread
- Replies: 3
- Forum: General Discussions
