Under half a tank my sender don’t work
And get a check engine light so need to replace the unit.
Anyone have luck with any of the after market brands?
What do you recommend
So the steering rack is grinding horribly when turning left. really grinding... a new rack is 2500.. i dont feel like paying that
i am find it impossible to find a remanufactured one.
Question has anyone rebuilt these? do they make kits to rebuild them? i cant find much info on it. that i...
Ok some codes I noticed here.
Could this be why my transmission has been shuddering and driving off??? And my speedo bouncing driving down the highway
Coincidence I just put motor
Back in the truck couple weeks ago? PCM connections and harness don’t look to be bad or pinched or anything ...
Truck is gunna be the death of me.
I have developed a surging rpm now while driving down the parkway.
Even with cruise control on at a consistent speed in the same gear the rpm’s will just sit and bounce like a heartbeat over and over consistently . Like jump 200 rpm rhythm I can hear it as...
i have 150k miles on my 8 speed. Fluids never been touched. do i leave it alone or drain and change fluid.
getting mixed reviews that new fluid at this point may cause issues.
thoughts?
So my truck had the dreaded hemi lifter tick. Finally started misfiring. Cylinder 5. I was hoping to wait until warmer weather in NY to do this but the motor would misfire bad over 2500 rpm’s.
The oil pan was also weeping through and leaking. It’s a pretty big job with a 4wd truck to change...
So I yoked my motor out. Cam lifter chain tensioner push rods oil pump. Manifolds done and new gaskets
Motor idle amazing dead on. Truck runs great.
But, I feel the motor has this slight chirping sound. Listen for it in the video. I removed the belt to rule out pulleys. I posted on...
So just rebuilt the top half. Lifters cam ,pushrods . I noticed there is some side to side play in the some of the lifters . No up and down just side to side like the video. All push rods appear to be seated correctly and the bolts torqued to 16ft lbs from the inside out. I spun motor by...
Anybody drop to the 180 stat?
I have no other mods but I am going to replace my stat as it is apart anyway
What brand is good?
Should I go 180 or stock 203
So I mounted my new oil pan. But having anxiety . The 4 spots you lay down rtv on the gasket. The passenger rear side on the side of the block the rtv didn’t push out on. It pushed out towards the back of be pan.
I think there is alot of surface in there and the rtv may have covered that...
Finished my motor up and days away from start up.
I used Mopar cam and Mopar lifters. What is the break in procedure for first start up?
All I am reading is pedal to the floor and let the motor crank for a bit to build pressure before actual start. I read the motor may be loud for like 20...
What’s up guys sorry for all these questions. I don’t want to be stuck with an open motor and the wrong parts. I am seeing melling oil pumping the way to go now. But I’m seeing two diff part numbers that fit.
Am I going with the standard 10452 pump or the 10452HV pump ( high volume ). I...
Any one know what specific balancer puller does in these hemi? Mine is 2014. I hear not all of them will work. Just trying to get all my ducks in a row before I start this lifter job.
Thanks
A while back I saw an entire parts list needed to do the cam and lifter fix. I can’t find it. Anyone have it ? Need to order everything.
Any direct replacement kits I can use ? Or should I just stick with oem parts
Ok so I am getting ready to change the lifters and cam on my truck. Is there a kit you guys would recommend for lifter and cams?
I feel if I put new Mopar parts in I may run into the same exact issues with the lifter failure.
Thoughts?
How long after you started hearing the lifter go did the misfire come?? I feel it has been going on for like a year and a half. Truck still runs strong noise almost sounds like bottom of motor starter area ..Video below
https://youtube.com/shorts/dPo2HC36EZs?feature=share
so my fuel sender stopped working on my ram 1500. 2014. Anything less then half a tank it reads empty.
So if i am going through the trouble of dropping the tank i guess i should just put a new fuel pump assembly in.
Mopar looks to be 300 bucks. Any of the aftermarket brands reliable...
My truck started making this noise a few days ago. Hard to pin point. I am thinking
Cracked flex plate ?
Loose converter bolts?
Hopefully not a bearing
2014 with 135k
https://youtube.com/shorts/bxhKJWEU0QM?feature=share
Ok so I am tackling my oil pan replacement this weekend I’m sick of the drips.
Anyone done one? I am going to jack motor by the crank pulley as seen on YouTube and lower front
Also it’s like a baffle gasket. Would you guys do black rtv on both sides motor and pan side. Or none at all and...
So today I was switching car from 4 low to 2wd. By accident I switched it to drive from neutral during the switch. Now the truck won’t go back into 2wd. I was able to get it into 4x4 high. But now won’t go back into 2wd.
If I hit the button it just flashes then eventually the screen says...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.