Search results
-
M
Need help on centering rear wheels after 2/4 drop
All specs within acceptable range except for caster. Here are the alignment specs from alldata -
M
Mag-Hytec Diff Cover and 2” Rear Lower
I did a 2/4 drop without removing the rear bump stops and that ‘U’ shaped piece and I would get a violent bottoming out on big bumps or dips. After driving for about two months I recently got my truck on a lift to check where it’s hitting and the no cut brackets are hitting the bump stops and... -
M
Need help on centering rear wheels after 2/4 drop
Updated pic with wheels centered after adjusting the control arms -
M
Rear bump stop removal
Did you have to cut the threaded part of the bump stop to make it fit or is there enough space to just bolt it up. -
M
Need help on centering rear wheels after 2/4 drop
I recently lowered my truck 2/4 with crown suspension coils and the wheels are noticeably closer to the rear of the wheel wells. Parts installed core4x4 track bar with bell tech relocation bracket,core4x4 upper and lower adjustable control arms, ihc no cut brackets, Viking shocks all installed... -
M
2/4 crown suspension drop
yes they were installed after I bought the longer t-bar kit no problems -
M
2/4 crown suspension drop
front qa1's and smaller bumpstops installed and the shop had to retighten the control arms because they were already loose and it now drives and handles pretty good -
M
Lowering my truck today. Need help.
ak did you have any driveshaft clearance issues with your drop because I recently dropped mine 2/4 and the driveshafts harmonic balancer sometimes hits the heat shield next to gas tank on certain turns and bumps. -
M
2/4 crown suspension drop
thanks guys, i measured the stock t-bar length and its 3.5" and the qa1 is 3" so i ordered a new t-bar kit hopefully with the new bump stops and qa1's installed the ride will be better -
M
2/4 crown suspension drop
it doesnt drive that good since its almost riding on the stock front bumpstops with the stock shocks -
M
Possibly selling my Belltech 2/4" drop springs
did you have to cut out the front bumpstops? and do you know the measurements of the bumpstops i need to replace mine i just did a 2/4 drop and it has the stock bumpstops -
M
2/4 crown suspension drop
the shock lower mount is u shaped and the bolt only contacts its outer edge and he said it might come off -
M
2/4 crown suspension drop
Also had frt/rr hellwig swaybars,spohn upper and lower control arms,panhard bar and rear qa1's installed but the shop that installed it had a couple problems they couldn't install the front shocks because the lower bolt mount was not long enough to safely install. anybody with front qa1 shock... -
M
This is what I get for trying to avoid an accident
Im underwater on the loan so the check is going straight to Chrysler Capital and gap insurance should cover me on the rest. And back to square one looking at new rams hopefully:) -
M
This is what I get for trying to avoid an accident
The driver got away, this happened in a poorly lit freeway off ramp around midnight Saturday only witnesses me and my passenger (who is also ok) Didn't get any license plates but I'm gonna look to see if any traffic cams got him -
M
This is what I get for trying to avoid an accident
davidram do you think I can still enter it for totm :signs8: -
M
This is what I get for trying to avoid an accident
I wish I would have t-boned the shit out of him instead of swerve but too late now -
M
This is what I get for trying to avoid an accident
Physically I'm ok just some minor cuts and bruises. My truck more than likely is a total loss. -
M
This is what I get for trying to avoid an accident
Some pos runs a stop sign I swerve out of the way and go up the sidewalk hit a street sign and and a wooden post and end up on my roof and the ******* doesn't even bother to stop and see if I was ok -
M
The Hellcat does exist!
707hp 650 lb. ft seems like enough to get it moving
