Search results
-
R
Interior swap
I upgraded my standard cab 2011 to 2014 sport door panels and Laramie leather seats. Everything is bolt in. The wiring for the seats gets tricky if you don't have the same electrical architecture. 09-12 are different than the 2013+ trucks. Have a dealer put in the sales code for heated seat...- rocky472
- Post #8
- Forum: 4th Gen DIY
-
R
Auto dimming mirrors
On the 2012 and earlier trucks the rearview mirror controls dimming the side mirrors. No sales codes were needed. In 2013 and beyond that may have changed. You may also need to add or update the harness that goes to the rearview mirror. As long as you have remote adjustment on your current... -
R
power fold mirrors
There are 2 wires in the mirror harness the power the power fold motors. Reversing the polarity changes the fold vs unfold function. The 1A harness may work but will require rewiring. Their switch probably senses the stall current in the motors and turns off. I have seen postings on the Jeep... -
R
Mygig
Received my 2016 map updates. The update requires the installation of firmware 2.600 and includes the firmware update disc. I installed the firmware and have not seen any issues. My backup camera is still working correctly. It takes about 1.5hrs to do both installations. Anxious to see if...- rocky472
- Post #9
- Forum: Audio & Electronics
-
R
Installed aftermarket parking sensors - review
I installed the Crimestopper CA5020 in my 2011. Also upgraded to chrome bumpers. So far so good. The system seems accurate and there are very few false alarms when braking in drive. Time will tell how well it survives a Michigan winter. The one thing I found is the chrome sensors do not...- rocky472
- Post #17
- Forum: Audio & Electronics
-
R
Mygig
After living with the radio for a week I decided to not install the 2.600 firmware. I read a post on the Jeep forum saying it could disable the backup camera. I have the Mopar camera kit in my truck. After I realized the radio does display album art from MP3's, I installed the 6168 gracenote...- rocky472
- Post #7
- Forum: Audio & Electronics
-
R
2012 RAM Steering Wheel in 2011 or earier?
Answering my own question. I purchased a 2012 wheel and tried the install. Checked the Chrysler wiring site and all the interface lines are labeled the same so I thought it would work. My first attempt to install nothing worked. EVIC menu control, horn, radio controls, heated wheel and cruse... -
R
Mygig
I just installed a RHR in my 2011. The radio has Firmware 2.184 and Gracenotes 5411. I downloaded a copy of 2.600 but not have installed it yet. The latest Gracenotes is at 6168. Gracenotes is not a priority since I rarely play CD's. Has anyone installed 2.600? Has anyone seen a list of...- rocky472
- Post #3
- Forum: Audio & Electronics
-
R
Interior LED light swap kit for stock interior lights
I purchased a kit from eBay that included the dome, reading, glove box and license plate. They produce a very white light that appears much brighter. The kit did not include the visor mirror lights. You can really see how yellow the original bulbs were when you open the mirrors. -
R
Installed aftermarket parking sensors - review
I would like to ask a couple follow-up questions. It has been almost 2 years since your original post. How have the sensors performed? I just purchased the same system and chrome upgrade sensors to install on my truck. I tested the system on my dining room table just to make sure they...- rocky472
- Post #12
- Forum: Audio & Electronics
-
R
power fold mirrors
Service parts I ordered: MODULE. Left. Door. 04602911AK MODULE. Right. Door. 04602910AK SWITCH-FRONT DOOR 68148895AA (2 door version) Pair Chrome mirrors from a 2014 Laramie (used) The cost for the modules was $36 each. The switch was $55 The drivers door switch is for a 2door... -
R
power fold mirrors
Adding to the thread. I have successfully upgraded my 2011 and got the power folding mirrors to work. From what I can tell the 09-12 door modules never had the capability to use the feature. They are missing the pins in the connector. What I ended up using were modules from a Grand Cherokee... -
R
2012 RAM Steering Wheel in 2011 or earier?
Ultra2207 - Did the swap work? Very close to changing my 2009-2011 style for a 2012 style in my 2011. Also adding the heated steering wheel option. I have read other forums that say the modules will not communicate correctly. According to the Chrysler wiring site all the connections are the... -
R
Question about door locks
Update: Remote keyless entry and start install was a success. I also had the dealer add the sales code for the vehicle alarm which worked. Unfortunately the lock switch buttons on the doors are still not operating. -
R
Question about door locks
I am adding the Chrysler remote start kit that comes with 2 new fobs, hood latch with switch, antenna and new WIN module. Already did the hood latch and antenna install myself to save some time/money at the dealership. I also asked the dealer to add the code for the alarm system. Will let you... -
R
Question about door locks
I added OEM power windows and locks to my 2011 RAM ST standard cab. The process is mostly plug & play except for the power locks. You will need to replace the window regulators, interior door skins, get the correct door harness, window switch etc. A manual window/lock truck has a second...
