Search results

  1. D

    finally install bilstein 6112, 5160, and zone uca

    What’s are you part numbers on your 5160’s.
  2. D

    Trailing arms

    I need uppers and lowers. Preferably stock.
  3. D

    Alphaobd Mileage Correction Notes

    2014 ram 1500 2013-14 cluster. Not sure which one. kindle fire 7 MX+ Mileage changed first try. Hours don’t seem to want to change. Shows continental on splash. Kindle says idle then just says connected. Like it just stalls.
  4. D

    Lower Ball joints 2013 SLT

    It just pushes out. No need to do anything. It pushes out through the bottom. Top down
  5. D

    Stacking lifts

    I’m working on it. I have superlift 6/5. 1/2 spacer on top of the lift spacer. Bilstein at 2.8.....1.5 body lift. 38” tires. My next set will be 40’s.
  6. D

    6” lift plus body lift...

    I ran 37’s on my 3.21’s for 50k miles. My truck still had plenty of power. It wouldn’t quite get to 8th all the time, but it did. Still hit the eco mode. My mileage was 11-12. It was shit but looked awesome. I just put a set of 38’s on, but I also swapped the front and rear axles to 3.92 with...
  7. D

    Axle identification

    Can I count the teeth or something. What do I look for? I wanna make sure it is what’s is supposed to be before I swap the front to the wrong gear if it’s not what it’s supposed to be.
  8. D

    Axle identification

    So, my truck came stock with 3.21’s. I bought what I thought was a 3.92 antispin rear axle assembly and a front unit to swap out. I paid someone to swap the rear and I did a burnout afterwards and still had one wheel peel. I super curious now to even know if I bought a 3.92 antispin. The sticker...
  9. D

    6" zone lift install questions

    I put my lift on in the garage and couldn’t get it out. I had to air down on stock tires. 6/5 superlift
  10. D

    ATI Super Damper 15% Underive Pulley

    I have the pulley and 37” tires. No issues
  11. D

    Painting the chrome in instrument cluster

    I searched high and low and only found one hit on this website. From google. And I can’t find it again. But yes you can. Take the gauge cluster out. Separate the two pieces. There are tiny little green spots. Plastic weld. I used a small drill bit. Like 1/16-1/8. Just enough to break the bond...
  12. D

    Aftermarket grille issue

    You can get on eBay and buy stuff called PVC foamboard and cut it at home. Super cheap and super easy.
  13. D

    Vertical fog lights retrofit.

    I’m in Kansas City missouri. I forgot about this post. I’ll look when I get home from work tomorrow!
  14. D

    Carven progressive or competitors?

    Sound is very subjective. I just went with a progressive from stock. It’s loud enough for me. The wife said it wasn’t too loud and she hates everything, so......it does have a little bit of drone. The radio will cover up the sound of the muffler if you don’t want to hear it. It’s been too cold...
  15. D

    Vertical fog lights retrofit.

    I think I have a pair down in the garage. I’d let them go. Whatever is a fair price
  16. D

    Carven Progressive Exhaust

    Muffler received
  17. D

    Carven Progressive Exhaust

    Money sent
  18. D

    Carven Progressive Exhaust

    I'll take it
  19. D

    2014 ram died

    Six months later it's still running great. Wish I could have saved that 400 bucks though. My computer is broke, so I can't even get started with getting the tune back. But it runs.
  20. D

    Just ordered my Superlift 6 inch kit!

    You can reuse the front bilsteins. The rear shocks have to change though. My bilsteins are set at 2.8 with the superlift kit.
  21. D

    Just ordered my Superlift 6 inch kit!

    I put my superlift kit in by myself. It took me about 17 hours. Straight through. Handy with a wrench, but never tackled a lift. Read the instructions over and over an over. The hardest part was cutting the rear lower control arm mount. After that It was all just nuts and bolts. Put it all back...
  22. D

    Lifted my truck now have a snapping noise from rear end

    I put on a superlift kit and had a very similar noise. My rear relocation brackets had a captive nut and bolt that went up through the rear bracket where the arms bolt up. I didn't put them in and when I would stop or take off, it would pop. I had those extra and reread the instructions over and...
  23. D

    3.92 Gear swap

    You could go to car-part.com and buy low mileage used ones. That's what I did. I paid around 1500 for a front diff and a rear axle with the limited slip. 6,000 miles on the units. Came from the same truck
  24. D

    Katzkin deals

    Leatherseats.com was wonderful to work with. Seats look awesome and feel great.
  25. D

    Tint adventure, hey KC area peeps!!

    I have used tint master on my truck and wife's jeep. It seems like a truer color if that makes sense. One of my windows got scratched by the body shop and they had it done by tint shop in liberty. It's faded where the window goes in the channel. There are also 435 pieces of dirt and lint in that...

Latest posts

Members online

... and 15 more.
Total: 1,261 (members: 65, guests: 1,196)
Robots: 1,624

Forum statistics

Threads
195,472
Posts
2,870,683
Members
156,184
Latest member
josefael

Share this page

Top