Search results
-
Belltech 2/4 with IHC No Cut Kit Bottoming Out
I’ve got a 2014 RAM RCSB that I just put a Belltech 2/4 kit with Street Performance shocks on. I also have the IHC no cut kit with Hellwig rear sway bar and Spohn adjustable pan hard bar. I’m having an issue with my truck bottoming out on the bump stops. Anyone else had this issue or know how to... -
Forged 5.7 with Bolt Ons vs 392 Stroker
I may just have to do that! Im sure you could improve performance by adding headers, cam, intake, and all that good stuff as well. I never considered this. Because stroker kits ain’t cheap. That would be a cheaper way to go honestly.- Brody57
- Post #12
- Forum: Engine & Performance
-
Forged 5.7 with Bolt Ons vs 392 Stroker
What kind of modifications would that engine need to be dropped in our trucks?- Brody57
- Post #9
- Forum: Engine & Performance
-
Forged 5.7 with Bolt Ons vs 392 Stroker
I’ll go forced. Most likely a supercharger.- Brody57
- Post #3
- Forum: Engine & Performance
-
Forged 5.7 with Bolt Ons vs 392 Stroker
I've got a 2014 RAM RCSB that has about 150,000 miles on it currently. Trying to decide which would be a better route to go between taking a 5.7 and putting a forged bottom end with heads, a cam, and bolt ons vs doing a 392 stroker kit on it. Any pros or cons would be great. She's running great...- Brody57
- Thread
- Replies: 17
- Forum: Engine & Performance
-
Belltech SP Plus shocks
Has anyone had any experience with Belltech’s 2/4 drop kit with rear say bar and the SP Plus adjustable shocks they offer? I have a local shop that’s offering that Belltech kit for $2,700 installed and aligned. I haven’t found much info on those shocks and was curious if I should stay away from... -
-
22" SRT Wheel Help
I will check them out! Im wanting the 22" SRT wheels and they have been pretty hard to track down. Im just not sure with the offset they are showing if it will rub or not. Thats what Im concerned about. I will have a Belltech 2/4 drop with those 22s and Ive seen a few threads about guys having... -
22" SRT Wheel Help
I think the OEM’s are a myth at this point. I haven’t found any of those. I’m not sure how high quality the reps are. -
22" SRT Wheel Help
I’ve found a few reproduction wheels but they are all 22x10s. I haven’t found any 22x9s yet. I’m not sure how Hugh of quality the repros are. I’m hoping I won’t have any rubbing issues. I’ll be running a 2/4 Belltech drop kit with those 22” wheels and tires hopefully. -
2014 RCSB Exhaust Questions
I appreciate your help! Same to everyone else!- Brody57
- Post #6
- Forum: Engine & Performance
-
22" SRT Wheel Help
Anyone know why its so damn hard to find 22x9 or 22x10 SRT wheels!? I've been looking to upgrade from the black 20" wheels to the SRT wheels and I'm having issues finding a new set that's not Ebay specials. Any suggestions? -
2014 RCSB Exhaust Questions
Okay awesome! I’m assuming that the cats are before the factory Y-pipe? So basically I could have them cut out that Y-pipe, install either an X-pipe or H-pipe and run whatever mufflers I want.- Brody57
- Post #3
- Forum: Engine & Performance
-
2014 RCSB Exhaust Questions
I'm in the process of looking at exhaust on my 2014 Ram 1500 RCSB. I'm curious to how the stock exhaust is ran. Is it single in dual out? I haven't had the chance to climb under it due to my work schedule. I believe I saw that the size is 3" in and 2 1/4" out. I plan on running Spintech...- Brody57
- Thread
- Replies: 6
- Forum: Engine & Performance
-
Brody57's RCSB Sub Build
That's no problem. I assumed you were about to tell me my port was way too small. Which I've heard a million times. It gets old after awhile lmao. Thanks! I'm looking forward to it too! I haven't got to work on it the last couple weeks due to work.- Brody57
- Post #56
- Forum: Audio & Electronics
-
Brody57's RCSB Sub Build
Ahhhh okay. That makes sense lmao. My bad.- Brody57
- Post #54
- Forum: Audio & Electronics
-
Brody57's RCSB Sub Build
What does this have to do with anything? I know what my port length is already. The port isn't put together yet. It'll be about 7" or so tuned at 36.- Brody57
- Post #52
- Forum: Audio & Electronics
-
Brody57's RCSB Sub Build
It's a 6" aero. It may be a bit small but I'm gonna run it anyways. Honestly I think it'll work out. If I'm not happy I'll switch to a slot or something. It won't be a big deal to build another box. I wanted to experiment with an aero. I've never used on before.- Brody57
- Post #50
- Forum: Audio & Electronics
-
Brody57's RCSB Sub Build
Alright here's the pictures of the box finished. I didn't get a chance to work on the system much this week due to the storms and my job. But I'll have a new week next week! These pictures make the box look like it's sprayed uneven but it's how the glare hits it. When you see this box without...- Brody57
- Post #48
- Forum: Audio & Electronics
-
-
Wanting to lower a 14 RAM RCSB
LOL! I knew you'd chime in eventually! Yes im still talking about it! I was about to pull the trigger on the drop and my system came up. So Ive been building and saving for it. It turned out to be a monster ass system for a single cab. Now its the drops turn! -
Wanting to lower a 14 RAM RCSB
I appreciate everyone help in here! I think I'm gonna go with the Belltech 2/4 with a Hellwig rear sway bar and the Ford F-150 Front sway bar links. Are there any modifications on those sway bar links to make them work or do they fit perfect? Now my last question is about the illicit brackets to... -
Wanting to lower a 14 RAM RCSB
Okay here's the deal, you do your thing and I'll do mine. If you want to lift your truck. Do it. I don't give a shit. I'm gonna lower mine no matter what your opinion is. If you don't like it, get the **** out! -
Wanting to lower a 14 RAM RCSB
I know how you feel! It's pretty annoying at times. -
Wanting to lower a 14 RAM RCSB
With all due respect, I didn't ask for your opinion. I don't need your approval to lower my truck. I'll still be able to do anything I want with it but with a sportier look and performance. You can exit left.
