Search results

  1. T

    Thread can be closed, sub box claimed.

    No Subs, just the enclosure. 3rd & 4th Gen Ram MTX Thunderform Sub Enclosure Accepts 10" subs. Form fitted to 3rd and 4th gen rams, quad or crew cab. This is from 2 vehicles ago ;) and I still have it sitting around. Rather than throw it out, I'd rather see someone get some use out of it...
  2. T

    5th Gen OEM Stainless Steel Wheel to Wheel Tubular Side Steps for Crew Cab with 5'-7" Bed

    I went aftermarket for side steps so these are up for grabs. They have 1400 miles on them so basically brand new. An added benefit to these over buying new is that they have been ceramic coated and water / debris falls right off. Mopar Part #82215300 Link to Mopar Product Page...
  3. T

    Looking for advice on Fuel Rims Offset

    If I go to carid and put in my truck info and select the coupler series, it comes up as guaranteed fit. The offset listed is +1. My understanding is that the 19s have a +19 offset. I am clueless on wheels, does the +1 mean that it is +1mm compared to factory? I want the wheels to sit as close...
  4. T

    Anyone have experience with Black Chrome?

    There is a Black Ram not too far away from me and the wheels are black chrome. Not blacked out like most talk about here but black chrome. This got me thinking, instead of blacking out badges and the running boards on my Black Sport Appearance, getting those pieces chromed in black chrome would...
  5. T

    USB Surround Lights remain on

    Anyone notice on their 19 that the lights that surround the USB ports remain on when the truck is off and locked? Just seems odd to me. Neat but not really needed.
  6. T

    Buyer's Remorse

    Anyone have "Buyer's Remorse" on the truck you ordered / bought or the model or options you chose? I ordered a Big Horn optioned exactly how I like and I'm starting to think I should have went with a Rebel. A Rebel would suit my taste in truck and wheel height. A rebel optioned the same way...
  7. T

    8.4 to Aftermarket Radio Install Kit (Scosche & Maestro)

    I've ordered a new truck so I removed this equipment from my 2014. There are several things in this picture that include everything you would need to go from a RA3 or RA4 to an aftermarket HU. 1 Scosche Faceplate and Mounting Kit. Comes with everything as new, including instructions. It is...
  8. T

    ScanSpeak Illuminator D3004/6020-00 Tweeters Mounted in Sail Panels

    Time for an upgrade, a truck upgrade that is. I removed these from my 2014 Ram, they are roughly 3 years old and sound amazing! They are mounted in a standard Ram Sail panel using the nice screws that you can purchase from Madison Sound when you buy the tweeters. There is one caveat to...
  9. T

    Thinking about trading up, questions about exterior accessories.

    Thinking I might pull the trigger and trade up. That leaves me some questions about my exterior mods or additions. Will a 2014 bed rug and bed cover fit on a 2019? The bed cover was replaced under warranty last year so it’s still in new condition. It’s a Tonno Pro LoRoll. Not that expensive...
  10. T

    Need some clarification on the 12” Screen and HK System

    I was under the impression that when you choose the 12” screen, it automatically included the HK system. I just looked at a sticker and seen it has the 12” screen but lists the 9 speaker system with subwoofer. Does the 12” truly come with two different audio configurations? If so, what would be...
  11. T

    To those who traded, was your trade value good?

    Just curious for those who traded another Ram in for a 2019 Ram if you received a good trade in offer. I’m sure you did your homework, was their offer in line with what KBB or other car valuation sites list? I’m not pulling the trigger yet but it’s always good to have knowledge. ;)
  12. T

    Key FOB Fix - YMMV

    I responded to a thread yesterday about a Key FOB issue and I mentioned my Key FOB was not working either and it prompted me to finally get off my butt and look at it. This is on a 2014 Ram with a typical Key FOB, not a push button start vehicle. Anyways, I remembered a video I seen on YouTube...
  13. T

    Going from 8.4 RA3 to Aftermarket Head Unit

    I am FINALLY getting around to replacing the factory 8.4 (RA3) Non-Alpine HU to an aftermarket HU. I know I am not the first to do so here but I thought I would create a comprehensive list of all of the parts required and any notes. If you visit Crutchfield and enter in your vehicle info and...
  14. T

    Idatalink ACC-USB Question

    For those of you using an Idatalink ACC-USB, do you have any issues with it when streaming or using Android Auto / Apple Carplay? I am going to begin to accumulate parts to replace my 8.4/RA3 and I read a couple of reviews that say it has issues maintaining connection. I question if that is...
  15. T

    Question for those who replaced an 8.4 with after-market

    For those of you who have replaced your 8.4 with an after-market radio, do the original volume and tuning knobs still work.....I am assuming you are using a Maestro. I am looking at the Scosche CR1297DDB Cadillac Eldorado, Seville and Deville Dash Kit 1996, 1997, 1998, 1999, 2000, 2001, 2002...
  16. T

    Scosche 8.4 Bezel

    Has anyone tried this Dash Kit yet from Scosche made to replace the 8.4 bezel? Cadillac Eldorado, Seville and Deville Dash Kit 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Aftermarket Installation Kit | CR1297DDB | by Scosche Just want to get your thoughts on it if you have...
  17. T

    2014 RA3 Radio Non-Alpine Signal

    I posted this over at DIYMA but thought it could be of more value here. There were some questions as to whether or not the rear channels of the RA3 (8.4a) Head Unit put out a full signal so I pulled out my gear and gave it a run. This is a REW measurement sweep from 0 dB to 20k dB using a...
  18. T

    Shops for lift in SE Pa

    Can anyone recommend a shop in SE Pa for a lift installation? I know very little abut lifting trucks but I am very interested in going roughly 4" on my 14 Crew Cab. I am about 10 months away from new tires so I figure that would be the optimum time to do it. During that time, I hope to...
  19. T

    Help me decide on some new subs

    I am going to pull the trigger on a Dual Netaudio Enclosure for my Crew Cab and I need to figure out what subs to put in it. I think 10's fit my music style best so I am thinking 2 10"ers. I will be throwing 275 Watts RMS @ 4 Ohms to each Sub. This is for SQ and not Boom! The popular choice...
  20. T

    Atrend Phantom Fit Sub Box

    I was over at the Atrend site looking and I noticed this box. Pretty sweet looking. Only available in 12" and oddly only provides .8 CU/FT...which seems odd, Netaudio as a comparison is listed at 2.0 Cu/Ft but if you are into the high gloss look and willing to spend $618, not too shabby.
  21. T

    Sealing the rear of the speaker mount

    A thread over at DIYMA had me thinking. We are pretty fortunate to have the plastic speaker mount on our doors unlike other vehicles. The mount is both strong and pretty deep but has anyone tried to seal the back of the mount to see if it would improve mid-bass? Just thinking out-loud...
  22. T

    Adding Amps and Speakers and Keeping Stock HU

    There seems to be quite a few threads about difficulties interfacing with the stock head units on our generation of trucks when adding after-market amps and speakers. Many of the threads go abandoned as well....hopefully the thread starter did get things working and just did not report back but...
  23. T

    Tweeters for Sail Panels

    I knew it was going to happen......my Focal TN43's are giving out, can you say crackle? They are rated at 15 Watts RMS, peaking to 100. When you are throwing 85 RMS at them, things are going to give. ;) The current tweeters are in my sails and I would like to keep them there. Anyone have...
  24. T

    What will Rear Fill do for your Ram Crew Cab

    Rear fill is asked about in many builds around the net. If you read forums where the majority of people like an active front stage and then ask about rear fill, you will get the reply "ditch the rears" as a response....but no one really ever provides a "sound" reason. I thought I would...
  25. T

    Show Off Your Amp Mounts

    I had my amp and crossovers mounted to a board under the rear passenger seat as I knew I would be adding / subtracting things and I wanted easy quick access for adjustments. Since then, I've added things but most importantly I added seat spacers which then gave me easy access to the back...

Latest posts

Members online

Total: 395 (members: 6, guests: 389)
Robots: 1,055

Forum statistics

Threads
195,469
Posts
2,870,596
Members
156,177
Latest member
joeyoliver45

Share this page

Top