Apparently the edge pulsar doesn't work on the 23-24 ram 1500 with Etorque. They have a new version called the diablosport pulsar XT which is not an inline/piggyback to the PCM but something that communicates through the canbus and splits the gas pedal. It doesn't affect the tune so no "power"...
General announcement to remove the lower bed to car seal on all 4th and 5th gens. I have less than 1k miles and have had the truck a month and just got around to doing it. Already wore through the paint a bit and I’m not 100% sure why ram does this. Would it be hard for FCA to apply PPF to that...
Just got my 2024 ram 1500 with the factory LED reflector headlights. These things are killing me coming from a 2018 with FXR projectors and 50w HIDs. Looking at options that offer significant low beam performance increase. From what I see not many integrate with the factory LED.
1. Vlands...
Got these for xmass for my 2018 factory power folding mirrors. It’s the one with the bottom turn signal and puddle lights. These are new and the truck was totaled before putting them on. These are $120 new and I would like to get $75 plus the ride. The are like a smoked housing with yellow...
My new 2024 ram 1500 5.7 etorque has less than 100 miles and it’s a week or so old. Today I noticed that the battery voltage seemed low on the dash. To be fair today was the first time I drove the truck after driving it home a week ago so I didn’t notice the battery. I opened the trailer app and...
Pulled from my 2018 Laramie. Front bumper has scratches and 2 small dents from a tonno cover impact. Would make a cheap quick replacement and comes with license plate holder. Rear bumper is in perfect shape and is fully assembled with plastics, braces and lights. Both bumpers have holes for...
Replaces stock 4th gen muffler for the 5.7 Hemi. Remove and replace and it’s a borla pro xs muffler and ZZDP drone resonator. Killed all the drone on my 2018. On the car for maybe a year before I pulled it and did a full catback. Located in 06611 CT.
$125 Borla pro XS muffler and ZZDP drone...
Stock low mileage 4th gen catback with OE tips but also have carven 5” slant double wall tips for stock exhaust. No rust on the polished end of the tip and would clean up great. Remove stock muffler and replace. Located in 06611 CT.
$175 for the entire stock not much corrosion
I got this for xmass and my Truck just got totaled by a high schooler. So I never got to install it. it’s the new Bak Revolver x4s roll up cover #80207 paid $1200 and letting it go for $900. Box is still sealed it’s for the 09-22 classic with 5’7” bed and no ram box. I can return it but will...
Sad news, Thursday early am driving to work right around the corner of my home a high schooler pulls out without looking into traffic in a 21 wrangler and takes me out. I was going about 23mph according to the dashcam and I would assume that’s accurate given the traffic and road conditions. Kid...
One of these plastic heater hose clips popped out of the valve cover and layed on my shorties and melted the end. Now it doesn’t lock into the valve cover and I’m worried it will pop back out again. I’ve found the complete hose assembly with these brackets on but not separate. I just need one...
I've been getting a random squeak on my 2018 Laramie and its been hard to pin down (seems to happen when its colder out but not consistent). I only have 60k on my 5.7 hemi but all factory. I was going to start getting parts together for the spring as I plan to do a B&M deep pan on my 8spd and a...
I have 60k on my 2018 8 spd and have no real issues with it except the first shift from 1-2 when cold has a bit of flare. I'm looking to do a fluid and filter change as well as install Caulk's tstat bypass. I won't be doing this till the spring so I will likely have 63-65k by the time I do this...
My 2018 Laramie was hit my a tonno cover at 70mph and the front got scraped up pretty good. Took the money from the guys insurance and color matched the rest of the truck as well. I got color matched front and rear bumpers off eBay, I ordered a pint of my color and qt of 2k clear and got a new...
At around 43k my truck had already developed brake squeal at most light to medium braking and it’s a 2018 all OEM stuff. I yanked the stock rotors and pads and did Wagner premium ecoated rotors all the way round. And then did PFC carbon metallic pads. Lubed all the pins and cleaned it all up...
My chrome bumper on my 18 Laramie got a few small dents and lots of scratches from a flying tonno cover. I will be replacing the scratched front upper bumper cover and grille and color matching to my walnut brown metallic. I picked up a new painted/color matched bumper which looks great and of...
Got a new painted steel 1500 bumper going on in the spring. I want to protect the paint and wanted to use a film. Having a hard time finding precut films for the lower steel part of the bumper.
pic of the bumper attached. My stock chrome looks fine (chip wise) but I’ve heard the painted...
I had a front end incident with a tonno cover at 70mph on the highway which caused damage to the front end of my 18 Laramie. Among other damage The grill was broken, AGS frame cracked and then I started getting the check engine light. Code read AGS performance error. I pulled the AGS and checked...
Truck got hit by a flying tonno cover and smashed the grille/cracked the active grille shutter frame. I pulled it and checked the motor (no slats were popped out) and the motor sounded like it was clicking and very easy to move... perhaps something broke inside? I want to delete the active...
Driving home from work following a new black f150 on the highway getting up to speed with a tractor trailer blocking most of the light. All of a sudden giant black hard tonno cover flying at me at 70mph. Took out my new custom grille, dented and bowed the chrome front bumper, scratched up the...
I've noticed my rear doors have water in them when I open them and I can see water drain out the bottom. When the doors are closed the seal is tight at the bottom of the door so the water doesn't drain out. I would rather not have water inside my doors as they clearly stay closed most of the...
Think I want to get Alfaobd... windows version as I have an iphone. My truck is a 2018 Laramie so I think I need the bypass harness, plus bypass module as well? Does anyone sell a kit like a vendor or something so I make sure I get everything I want? It would be nice to adjust tire size for...
Finally taking the plunge to get rid of all the chrome. Amazon grille color matched with custom mixed factory color in a can. 3 coats of clear (will wet sand down the road) modified the stock behind rad ducts to fit with alittle emblem for some color. Mirror covers had on the shelf for over 4...
So I picked up this grille on Amazon and I’m gona paint match the outer ring to paint code PUW. I ordered the paint and I got the grille and it’s not what I was expecting. Grill is very rigid but the inside mesh is molded to the outside ring so I can’t pull it out for paint. Also the way it’s...
I did my JBA catback which sounds great and had purchased this Siless 2 in 1 prior to the catback purchase when I still had my borla muffler swap on the truck. Before the JBA was even a thought I figured covering the rear wall and under the seats would cut out any resonance I was getting. So...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.