Can anyone help me identify the connector that hooks up the traction control/tow haul buttons? I’m looking on dcctools but having trouble finding the right connector. Thanks for any help.
2014 ram 1500 express
Dealership was no help they over charged me for the wrong bolts. Can anyone point me in the right direction for the bolts that bolt the instrument cluster bezel and the 2 bolts that are in the top center of the radio bezel. They should be all the same bolt I believe. Thanks for any help
I didn’t like the kicker replacements but that’s just my ear. I went with focal components up front and threw the kicker 6x9s in the back doors for filler
I have looked but just wanted to double check. When it comes to the Leather wrapped upgraded dash’s are the only option the red stitching or the light tanish white stitching? Was there ever a black stitching option? Thanks
I did 360hp and 390tq with vararam, 1 7/8 longtubes, efan swap, hemifever tune. If that helps with where you wanna go. That dyno pull was at like sea level too.
I would put the tweeters in the sail panels. I didn’t like the sound when I upgraded speakers in the dash it sounded harsh to me bouncing off the windshield
Vararam, long tubes, hemifever tune, efan swap. Ported throttle body dynoed at 360 hp 390tq
6 months of having a cammed fbo srt 6.4 Hemi in the ram the stock tranny is doing great. I think the tuners have figured out quite a bit on these 8 speeds the last few years from what they are saying.
Changed out bulbs that did not change anything, still no low beams. Gonna go back out and check fuses.
I checked F10 and F14 they looked good. Unplugged the battery to try to reset the bcm.
thank you for the help and insight. Only the low beams don’t work everything else does. Do I need to find a pin diagram to test certain pins on the connector? I’ll stop and get some halogen bulbs after work
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.