Can anyone help me identify the connector that hooks up the traction control/tow haul buttons? I’m looking on dcctools but having trouble finding the right connector. Thanks for any help.
2014 ram 1500 express
Dealership was no help they over charged me for the wrong bolts. Can anyone point me in the right direction for the bolts that bolt the instrument cluster bezel and the 2 bolts that are in the top center of the radio bezel. They should be all the same bolt I believe. Thanks for any help
I have looked but just wanted to double check. When it comes to the Leather wrapped upgraded dash’s are the only option the red stitching or the light tanish white stitching? Was there ever a black stitching option? Thanks
2014 ram oem projectors
Hid kit from retroshop ran great for years
One low beam went out a couple months ago
Tried replacing the bulb and that didn’t fix it
Replaced HID parts and didn’t fix it
Swapped the working headlight to the non working side to eliminate possibilities and the headlight...
I’m doing some things and need a longer bolt but don’t know what thread this is. Every other thread is a different size. I can just drill it out and use a normal bolt but was hoping to just find this bolt at 2” or 2 1/2” long.
It’s from a center console.
Has anyone taken apart the overhead console in a 5th gen or removed the headliner? I’m updating my 4th gen upper half of the interior and I can’t seem to find the 5th gen overhead console frame that bolts to the roof and am hoping it attaches the same as the 4th gen. Thanks
Wasn’t sure where to ask this.
I hate the 4th gen radiator cover. I had cut mine up for the vararam to work.
Now that I swapped the 6.4 srt motor in I can’t use the vararam anymore and need to replace it. I know the 5th gen cover isn’t an exact fit but anyone think with some modifying it could...
Has anyone been able to pull off a clean-looking rear seat delete? I'm throwing around ideas. I have amps on the back wall so their would be a panel to cover those and block the noise from the vents along the back wall and then for the bottom, I am throwing around the idea of cutting out the...
My cammed 6.4 srt motor should be here in 2 weeks and I just thought about the exhaust piping size. I already run 1 7/8 ARH headers and 14” magnaglow mufflers( which may be to loud after the swap) but the piping is all factory sized. Should I have it upsized from the cats back? If I go with a...
Just curious if their are any choices for street style bumpers other than stock that I’m not seeing online. Not looking for off-road style. Thanks for any help
Just sent the payment to MMX for a 6.4 srt long block with their max effort cam. Let me know if I’m forgetting anything else from the parts list to make it go smooth.
From moes:
S&B 6.4 intake
Ported 6.4 intake manifold with extensions
Ngk plugs
Ati under drive pulley
Street edge torque...
I’m ordering a long block and need a few parts and figured I would try here before ordering from moes.
Looking for:
6.4 ported intake manifold
6.4 intake
Ati underdrive pulley
After the motor swap I’ll be looking for
Roll pan
Aftermarket hood
Probably a new front bumper as well
If anyone has...
2014 Ram 1500 77k miles
Full synthetic PUP since new
Always used 91 or 93 octane
I've been getting P0306 code. I tried swapping plugs and coil to a different cylinder and drove 50 feet and it threw the code again. So I believe my next step is pulling the valve cover and checking to see if the...
The old lady has a 2014 challenger. She wants a new HU with a back up camera and android auto at a minimum.
Everything is stock.....for now. It actually doesnt sound bad.
Any hu suggestions for her?
Am I missing the part that holds the spring on the bilstien? They are ground force 2" drop springs. I dont know what that is called. Perch? Is the stock one supposed to be reused? Or anyone know where I could get 2?
I was driving around the other day and all of a sudden the tpms light came on and all 4 tires show a dash. No low pressure warning beforehand or anything else weird.
Anyone have this and solve it?. I've had these 22" hellcat rims for about 2 years. I had a lsd installed a few weeks ago but...
Am I missing anything? Any issues I may have? Good to go?
front
Gf springs
Bilsteins
F150 sway bar end links
Rear
Belltech rear kit (springs,bump stops,sway bar end links)
Adjustable panhard bar
Adjustable control arms
Illicit no cut brackets
Qa1 ts901 (do they work with no modifications?)...
I've had a long battle with my first build.....
The focal components sound great
The zapco sq 4ch amp is awesome.
Th pioneer 7200nex with idatalink maestro works great.
My issue is the sundown SA12. Or the zapco 1350xmii being to powerful. Or the lack of air space in the sealed foxbox. Or...
Hi Benny I had the third break water leak and have a musty funk in my truck when its warm out. Do you have a price or part # for the carpet and whatever you call it under the rear seats. Thanks
Also did you ever find a black upper c pillar for the interior?
I have 2 jbl ms500.1 amps one new in box, other is used and scratched up but works great.
I have 1 jbl ms100.4 amp used scratched up but works great
I have 1 jbl wireless bass knob that can control up to 3 amps at once.
I'd like to sell all of this together if I can^^^^^. $425 shipped
I have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.