Search results

  1. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I should add I upgraded to firmware version 40.1 this morning. Looks like the TSB covers this as an issue with previous firmware. Just weird that it just now started happening, but hopefully firmware update addresses it.
  2. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Out of nowhere, my Panasonic unit all of a sudden is freezing up / won't come on randomly when I start my 2015. It has done it twice in the last week after months of success with the retro fit. Anyone else had to troubleshoot something similar? On 39.6 firmware. I also am utilizing...
  3. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Long overdue, but wanted to share update to my previous post. The Customtronix HDMI to composite video converter is installed and works perfect. Secondly, Customtronix worked with me on the heated seats, steering wheel and vented seat buttons. They put me in touch with one of their software...
  4. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I think your issue is with the knockoff hub. I had same issue.
  5. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Posting update to my previous post above, the other harness Customtronix sent me did not help with my soft buttons. Thus I proceeded to downgrade from firmware 39.6 to 39.5. Low and behold after a couple radio resets, the soft buttons came back! But here is the bad news, it was only temporary...
  6. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    This will be somewhat long-winded, but I wanted to post an update on my installation on my 2015 Ram 3500 with hopes of this helping someone else or even getting some feedback for my own situation. My truck had VP4 nav radio with factory cargo camera along with reverse camera in mirror. I...
  7. C

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    See this post which references Error 20.
  8. C

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    I successfully upgraded P/N 68461699Ax (UAQ 4c Nav) from 34.5.0 to 39.6 via the link posted a few pages back.
  9. C

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    Is it "safe" to upgrade and is there a downloadable or shared copy anywhere?
  10. C

    Additional UAQ/UAS Update Files 28.3/30.24/34.2

    I have P/N 68461699Ax (2020 1500 Classic UAQ 4c Nav) radio that I installed in my 2015 Ram and came with firmware 34.5.0. Any available updates worth upgrading too?
  11. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Anyone by chance have a spare module USB hub they want to part with for cheap? I ordered a Chrysler 200 hub back in June and it was supposed to be shipped by mid-August. Now they are saying mid-December at the earliest. I'm just looking for any 4C compatible hub to get me by until I can get my...
  12. C

    AC Not Blowing Hard Issue

    This could potentially be my issue based on what I'm experiencing.
  13. C

    AC Not Blowing Hard Issue

    That is not my issue in this case. I do have a filter, but AC will randomly (seemingly on long trips) stop blowing until I shutdown truck and / or switch it off and on a few times.
  14. C

    AC Not Blowing Hard Issue

    Hooked up AlphaOBD and couldn't find any faults at all. So I do not believe my blend door has faulted.
  15. C

    AC Not Blowing Hard Issue

    Recently went on a long trip for vacation. Had a couple instances where AC would stop blowing with much force, but it sounded like blower was still on. Air in vents was cold, just not blowing. Is this some kind of blend or actuator issue? I was able to correct once by shutting off truck for a...
  16. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Question for those that have upgraded from VP3/VP4 Harman radios to the 4C/4C-Nav and utilize Customtronix products. I currently have 2015 with VP4 where reverse camera is in rearview mirror. I currently have Customtronix harness with software jailbreak. I'm getting ready to upgrade to 4C radio...
  17. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I've been following and reading through this thread, but not sure if I have a clear answer... I have a 2015 VP4 with Customtronix harness and software jailbreak. Considering upgrading to 2018 4C (non-Nav) radio for CarPlay. I'm assuming there are no Customtronix solutions for the new setup? I...
  18. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    Is the thinking that if you have revision "B" or newer, the interface module would not be needed? I confirmed P/N under my seat ends with a "B". I haven't purchased radio or hub though so can't speak in terms of compatibility with the HSM yet.
  19. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I contacted Customtronix to see about their JailBreaker Enzo if I put the 2018 4C in my 2015 and they came back with the following response: I would recommend not to do that! there's too much problem with exchanging to Panasonic units believe me! if you have had 2016 or 2017 it would be ok but...
  20. C

    All Repair Parts @ Employee Cost!

    What can you offer for parts 68331631AK & 68283703AA?
  21. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    As far as the dual USB hub from the 200, if you look a few posts up, it appears that it may be a better fit to replace the existing hub from a fit, form and function perspective.
  22. C

    How To: Install a 2018 4C (UAQ/UAS) Radio in 2013 - 2017 RAM

    I'm just diving into potentially upgrading my 2015 8.4 radio and have overwhelmed myself reading through much of this thread. For 2015's, it seems there are very minimal compatibility issues for the conversion? I have a few additional questions that I'm sure most of which have been covered...
  23. C

    AlfaOBD

    There is a maximum number of FOB’s you can program, right? I have one that partially quit working. Is there a way to “remove it”?
  24. C

    Rear Doors Ambient Lighting Troubleshooting

    I recently purchased AlfaOBD and BCM is reporting fault number B17A5 which indicates some kind of "Halo Lighting Ground Short" or something along those lines. I had not noticed it before the fault, but I checked and the accent LED lighting (door handles and map pockets) on the the rear doors are...
  25. C

    Rear Door Ambient Lighting Not Working

    I recently purchased AlfaOBD and BCM is reporting fault number B17A5 which indicates some kind of "Halo Lighting Ground Short" or something along those lines. I had not noticed it before the fault, but I checked and the accent LED lighting (door handles and map pockets) on the the rear doors is...

Latest posts

Staff online

Members online

... and 14 more.
Total: 1,328 (members: 64, guests: 1,264)
Robots: 1,758

Forum statistics

Threads
195,612
Posts
2,872,531
Members
156,431
Latest member
5ccarter3

Share this page

Top