Search results

  1. S

    TRADE

    Wish I would have seen this two weeks ago when I was in Pensacola! I would trade for these. I have 20x9 with a zero offset that I've had on the truck almost a year.
  2. S

    Roof Marker Installation

    If it were me, I'd consider buying the mopar kit on amazon, utilize the template, then send the kit back. Just an idea but good luck, I've considered this on my truck but can't bring myself to drill into the roof yet lol
  3. S

    2016 Ram 1500 6" lift ?

    X2 here, everytime I walk by it and see the rake I consider trading someone rear coil springs for the 3" just to level it out but I don't want to lose the heigth either.
  4. S

    New 2009-2016 Ram Truck Black Smoke LED Tail Lights+Black LED 3rd Brake Light

    I have a smoked third brake light that came with those exact tail lights for my truck I would like to get rid of if he doesn't want to seperate the tails and third brake light.
  5. S

    Black quad headlights

    Here is what I got for the left side. Hope these help.
  6. S

    Black quad headlights

    Try moparpartsonline.com, I part number searched and got 68270496AC for the right side and 68270497AC for the left. The right side is about $125 and the left is $122. I bought these for my 2012 from this site before they switched part numbers but they look great and are totally OEM quality. They...
  7. S

    Vibration after lift on 2013 Ram 1500

    Yep, those are the exact spacers I was looking at the other night. I'm not 100% sure but did they change the wheel stud size between 2012-2013? I know I was reading on the site they offer both 14x1.5 and 9 16", maybe they sent the wrong size? I too like the chrome and black wheels if you go that...
  8. S

    Vibration after lift on 2013 Ram 1500

    What brand of wheel spacers did you buy or do you have the link? I've been considering buying some off amazon and I'm curious if it's the same ones I've been looking at. Truck looks good btw!
  9. S

    Midwest MN, WI, IA, MO, IL, OH, MI, IN, KY

    Saint Charles missouri here, about 25-30 minutes from downtown St. Louis
  10. S

    Bora Wheel Spacers

    Edit- I was going to have him custom make some spacers until further conversations I had with the company today. Very dissapointed in the lack of customer service in dealing with this company to the point that I would not refer them to anyone.
  11. S

    Bora Wheel Spacers

    My wheel had a flat mounting surface so 1.5" would not clear. I didn't want to trim studs so I emailed Lenny and asked him about it and he told me they can make any size you would like. I ended up having him custom make 1 5/8" spacers because I too did not want to run much more than 1.5" spacers.
  12. S

    Lift questions

    I have a 6" lift with bilsteins in the front maxed with 35" tires and I fit in our garage with a 7' door. It clears by roughly an inch or so. The approach angle is a slight incline into the garage, so that may play a role in making it into the garage.
  13. S

    Super chips help

    That's interesting, might be a situation where you contact their customer service department to verify that but I don't see why it would not work considering it's the same engine.
  14. S

    Super chips help

    There are two different serial numbers for your application with one being a California model (not sure of the difference) but the numbers are flashpaq 3841 and 3842 for the older unit that is applicable. I know superchips also recently came out with a new model called the flashpaq F5 serial...
  15. S

    Throttle body spacer?

    Throttle body spacer on a fuel injected engine = expensive paper weight.
  16. S

    Metal on Metal grinding sound

    Check your rear four link suspension bolts and make sure they are tight. After I installed my 6" lift, I heard a slight metal popping noise when taking off or coming to a stop. I crawled under the truck and figured out a couple of bolts had loosened up and when the axle would rotate due to...
  17. S

    LED lights

    I got lucky when mounting the two rear led strips under each seat because I have seat covers that use the elastic straps front to back on the bottom of the seats. I ran the led strips through those to hold them in place and connected the passenger side strip to the drivers side strip. I...
  18. S

    LED lights

    Here's another color options among many others.
  19. S

    LED lights

    The next two pictures show a couple different colors during late afternoon still very bright.
  20. S

    LED lights

    This is how I ran the led strip on the passenger side behind the lower plastic trim at the floor to connect to to module on the drivers side. You can either fish the wire through or slide it under the plastic until it's hidden behind it. I chose that route and it was pretty easy. On the...
  21. S

    LED lights

    For some reason the photo is rotated sorry, if some one can flip it I would appreciate it. The white module actually is mounted vertically along the metal.
  22. S

    LED lights

    This photo shows where I pulled the 12v power connection through the box shaped opening above the controller module to make my power connection for the strips. You do have to find a place to install a ground wire as well. As stated before, i grounded to the screw at the bottom of the kick panel...
  23. S

    LED lights

    This photo is the area I described where I zip tipped the controller module to some metal frame work and also zip tied all the connections from each led strip behind the plastic L shaped piece. Where the strips connect to the white connectors off the module, I electrical taped where the...
  24. S

    LED lights

    Here are some photos I had taken post installation to give you an idea of what it looks like finished and where I hid the controller module and wires. Bare with me, I'm using an iPhone for the pictures and uploading.
  25. S

    load knocking sound when reversing while applying the brakes

    Had what sounds like the same noise after I installed my 6" lift. Check all the bolts in the rear of the truck that attach to the 4 link suspension and other suspension components. I had a couple bolts that had loosened up enough that I could grab the lower bar that attaches next to the rear...

Latest posts

Members online

... and 14 more.
Total: 1,046 (members: 64, guests: 982)
Robots: 1,568

Forum statistics

Threads
195,469
Posts
2,870,642
Members
156,181
Latest member
bmaag1962

Share this page

Top