Thank you Crash I will give it a try. Here's what has been happening and what happened when I cleared the CEL.
The old sensor is in place and sometimes I can see the temperature start to rise very slowly to the real temp from -40. It will finally reach the correct temp and when I turn the truck...
I switched out the ambient temp sensor with the old one from the original mirror no luck still -40 degrees. I checked the black and white wires coming from the sensor to see where they lead too in the terminal block. Both the old mirror and the new mirror pin out in the same location.
I then...
2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees.
Took to dealership $108 to flash code LEC, LED, LEG and everything...
2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees.
Took to dealership $108 to flash code LEC, LED, LEG and everything worked...
2015 Big Horn Tow Mirror issues
2015 Ram Big Horn - removed factory plain mirrors and installed factory tow mirrors with puddle light flip up ect. and ambient temp sensor. Once I installed received engine light on dash and outside temp read -40 degrees.
Took to dealership $108 to flash code...
My 2015 1500 5.7 hemi just started doing the same thing. It works some times and others its above 80 degrees. I will be making an appointment tomorrow with dealer. I know when I drop it off the a/c will working. I did take pictures of the a/c on max and thermometer in vent showing 85 dehrees
If you are looking to install remote start with OEM Key Fob with pushing lock button three times then you will have to purchase 4X10/5X10.
They will have to change the title to over $100 because the DBALL2 is no longer available for install New Dodge models. They have started a new web site and...
RLK my radio is original (RA2) as I have 2015 Big Horn
I am looking to upgrade mod to Nav as I have been looking at the thread and I just ordered the supplies to make up the harrness.
I agree with Mpgrimm2
I would see if anyone will let you swap out their RA2 and above and see if that will work for you. Purchasing another and finding out it does not work will be an expensive no grids.
If you can possily get an update for your radio that might fix the issue also
I...
If you are looking to install remote start with OEM Key Fob with pushing lock button three times then you will have to purchase 4X10/5X10.
They will have to change the title to over $100 because the DBALL2 is no longer available for install New Dodge models. They have started a new web site and...
This morning I started to work on the radio. You would think this was the easiest part just three wires to install. I know I saw someone post that the three wire location in the OEM photo is wrong. Well I am a believer as I did what the OEM directions said and depopulated the three wires and...
The BCM was the toughest part of the install by far. I couldn't get my big A in there so I removed the front seat so I could lay on my back to get up in there. I removed the connector C5 and striped the tape so to expose the wires and remove the pin 45 to splice the purple wire and reinstall. Oh...
What a day at the dealer, got there about 10am and at 11:50 I asked service manager what's the hold up. The information was sent to Chrysler to update the vin with the two sales codes and they didn't receive a responds. The tech came out and told me this happens and hopefully within an hour they...
Ran the main harness from tailgate to front engine compartment. Used my buddy body shop lift had it done in an hour. I am at the dealership now getting tha sales code flashed for integrated brake controller and while here the rear camera. Hopefully I'll have the camera working tonight fingers...
RLK the camera part # 852007 I hope that's right
I will try and check the wiring in the morning for you. I did purchase the truck from dealer but it was a program vehicle.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.