Search results
-
Pulsar, 6.4 any good
Going to put some 37s on my 2022 Power Wagon and want to fix the speedo and thought might get something that offered a power increase as well. Can you reset the tire pressure monitor as well ? I have read a lot of problems with them but am wondering if this is not really a issue any longer...- 69GWC
- Thread
- Replies: 0
- Forum: Engine & Performance
-
37x13.50—who has them
Alrighty that same old question over and over. Lol Anyway 37x13.50x17, who has them and any on stock suspension? Or what did you need to do lift wise? Pictures ? Looking at 3 different tires for my wagon, BFG KO3, Yokohama MTs and maybe Intercos SS M-16s but they only are in a 13.50 wide...- 69GWC
- Thread
- Replies: 5
- Forum: Dodge Ram Power Wagon
-
Exhaust
So after looking under this PW I decided I am going to put duals on it, this crush point at the Y connection just looks terrible trying to stuff two 2.5” pipes into a 3.5” pipe. So cutting that off and doing duals out with X-pipe then two magnaflows ending with two 5” black tips. Sound like a...- 69GWC
- Thread
- Replies: 2
- Forum: Dodge Ram Power Wagon
-
My new PW
So I did this yesterday. 2022 Power Wagon level 3 equipped. Really liked my 2016 but wanted a new truck with more bells & whistles on it and a just more capable truck for all around use. Honestly could not believe I found one in these times of empty car lots. Pic of the old truck as well- 69GWC
- Thread
- Replies: 0
- Forum: General Discussions
-
Best 6” lift for the 1500
So thinking of doing a 6” lift on my 16 1500 and then going up to 37s on it and wondering what people have had good luck with? If I do this I am going to swap it over to 3:92s at the same time since the front diff will be out anyway. Also will be doing off road bumpers and factory style fender... -
Drive train clunk/pop
Been awhile since I have been on you know been busy, hopefully everyone is doing well. Got a question on my 2016 5.7 8sp. It started yesterday making a clunk or a popping noise if you will , what sounds like a real bad u joint. It does this only with the rear tires on the ground and right after...- 69GWC
- Thread
- Replies: 7
- Forum: Engine & Performance
-
Idle hours VS drive hours
Has anyone made a post comparing idle hrs vs drive hrs vs oil choice vs cam failures or not.? With all the talk about cam/lifter failures and idle time and oil choice. I have also been driving my truck in 7th gear with tow haul for the last 2 yrs or so on mainly because of my 35s being 110lbs...- 69GWC
- Thread
- Replies: 57
- Forum: Engine & Performance
-
Core Control arms and towing.
Since I purchased this 2016 1500 I had been chasing a tail wiggle when pulling anything. I put Tufftruck Springs on, Hellwig sway bar, Spohn panhard bar ,Bilstien shocks, Timbergrove air bags, 10 ply tires and at every install ( did each thing at different times) it got better but was never...- 69GWC
- Thread
- Replies: 22
- Forum: Towing & Hauling
-
Front springs.
I am wondering whats out there for front spring replacement to a heavier spring ? Thinking about a aftermarket front bumper and know it will be alot heavier then my Express plastic bumper and dont want to worry about it sagging, also would not mind it feeling alittle more soild in the frontend... -
Core control arms came in
Big thanks @Nick@GotExhaust for getting these out so quick. These are way heavier/beefier than I thought cant wait to get them installed and feel the difference. They should really go well with my other mods on the back and really make the back of this truck feel planted -
My 1500 and towing.
Little story here, Bought my truck brand new and at around 3k we made a trip to the east coast pulling a twin axle 6x12 enclosed trailer went out empty back loaded. Pulled ok going out but could feel the truck moving around , did not think to much of it. The way back I was loaded down real heavy...- 69GWC
- Thread
- Replies: 23
- Forum: Towing & Hauling
-
Dash cam
So what brand/kind of dash cam are people using these days? I am going to pick one up and want one that has a clear enough pictures that I can pull tag numbers off of. I was ran off on to the shoulder today by a dumbass that did not even look or even seem to care, the whole time I was blowing... -
Cheap LED light bars.?
Has anyone had good luck with the cheaper LED light bars and small pod lights like the ones on Amazon? I found this brand and seems all the reviews are pretty good. Northpole Light 4.4 out of 5 stars 138Reviews LED Light Bar, Northpole Light 20" 126W Waterproof CREE Spot Flood Combo LED... -
Ladder racks, my way
Well I have been looking for some time at ladder racks for my camper shell but not finding anything I thought fit the look I was going after. So I got this idea in my head about a month ago and I finally got it done today. This is not a heavy duty rack just something I can through a ladder or 2... -
3:21s, stock tires - 3:21s, 35s
Well I just put 35x12.5x18s on my 2016 Ram 5.7 Hemi 8sp and 3:21s. I have a short video on it with the stock tires and wheels and one with the 35x12.5x18s General Grabber X 3s and XD Badlands 18x9s . You can hear with the stock tires it spins them all the way through 1st gear, the 35s dont...- 69GWC
- Thread
- Replies: 6
- Forum: Engine & Performance
-
New wheels at tires Finally
Went up to Fed X and got them my self..lol more pictures once I get rhem mounted. -
Sport Grill installed.
Want to give a big thanks to Curlyp for trading grill inserts with me. Great guy to work with and I hope he got my Mesh inserts today as well, I had inventory all week and the boss would not let me off at normal time and I was alittle late getting my grill shipped off to him. Hopfully the 2nd... -
$42 catch can
Well I got my Catch Can in today and was able to get it installed. $36 bucks off Amazon then I bought a better hose and two brass barbs to connect the lines for $5.00 + tax. Real happy with how its made, feels good and solid and even has a dip stick so you dont haft to pull the can off to...- 69GWC
- Thread
- Replies: 187
- Forum: Engine & Performance
-
Hellwig installed
Got my Hellwig sway bar today and got it installed, must say its a nice peice. Wont drive it to see what the difference feels like tomorrow. You can see its large and is heavier for sure. -
Traction Bars
So has anyone put traction bars on there 1500s or does anyone make any for them ? Since I installed my TTC-1211S or my topper not sure which one caused it but my truck wheel hops pretty bad now. Even at a 15 mph punch instead of just spinning the tires it hops pretty good let alone from a...- 69GWC
- Thread
- Replies: 10
- Forum: Engine & Performance
-
plastic dip gloss/clear on front.
Has anyone used the plastic dip gloss/clear on the front of there trucks for protection? Just really wondering if it comes off easy like the rest of the plastic dip products. ? -
Air bags in.
Installed my Timber Grove air bags today and will say this is a very nice kit really impressed with the design and the fit and finish on it. Pretty easy to install even with some of the bolts being kinda tight to get to. Put alittle over 60psi to check for leaks and it raised the truck 2" lol...- 69GWC
- Thread
- Replies: 12
- Forum: Towing & Hauling
-
Frame mount steps ? any out there.
I keep looking for nerf bars/steps for my truck and every time I find a set I like they way they mount is just crap. I cant believe all these manufacturers are hanging these off the rocker panels ! This is just sheet metal and thin metal as well. I would think if your going to pay over $300... -
Brand new and noisy
Went down to the local dealer today with a buddy to see about getting him a new Ram and heard first hand what Hemi tick is like..lol Man we started up a brand new truck and I thought crap was going to come out through the hood ! If I was new to Rams I might have walked off from the brand...- 69GWC
- Thread
- Replies: 8
- Forum: Engine & Performance
-
Input on my wheel & tire plan.
All right I am looking at ordering my wheels and tires here in the next few weeks and like many others I would like to have opinions on what I am ordering on wether they will fit. I have read everything I can and everything points to this set up working just fine. Iam on bils at 2.8 with...
