Search results
-
side steps/running boards. Probably a dead horse, but hey.
Been there done that. Went through 2 sets of aftermarket eBay tube type steps. Each lasted about 2 years. Finally put a set of OEM on that I got on eBay brand new, cheaper than the aftermarket ones and they are excellent. I had to install the riv-nuts in the factory location and bought the tool... -
2018 Laramie vs. 2019 Tradesman--which do you like and why?
Man that's a tough decision. I'd go with the 19 until it comes to the long box. Personally I do not like the proportions with a long box crew cab. But the rest of the equipment in that truck make it a better deal that the 18. I'd still look for a short box. I couldn't live with the long.- Noneck
- Post #30
- Forum: General Discussions
-
Key programming
Sounds like you need your 4 digit code for your RF hub. A dealer can give it to you but some refuse to do it. There is the AlfaOBD which can get your pin and also an App called PIN PULLER. It's a little weird but you download the app and buy credits then pay for your PIN with the credits ...- Noneck
- Post #8
- Forum: Audio & Electronics
-
Ram 2500 3.73s or 4.10s
Ahh the great decision! I have a 13 2500 Laramie Cummins which came with the awful 3.42 gears. Been trying to make up my mind and debating gear choice for a couple years now lol! 3.92 would be perfect it they don't make em. I have 35s and a 9k RV that I tow occasionally. My gut tells me to do...- Noneck
- Post #20
- Forum: Heavy Duty
-
Tire Pressures Unavailable Message??
Recently on my 13 2500 Cummins, I got the same warning. It went away on its own in less than an hour. Wheels are a year old with new TPMS. Twice now I have gotten errors while using my GPS saying "Vehicle phone requires service, see dealer" and the GPS shows but does not locate properly. Both of...- Noneck
- Post #13
- Forum: Dodge Ram Power Wagon
-
Can Anyone Explain What is Wrong With This Trim Piece?
Haha! Yeah the reflection of the person's hand holding the phone for the photo! I'm sure Ram will take car of that for you LOL? -
Ongoing problem after warranty expires
For what it's worth, I've learned my truck has weird occasional glitches that appear and go away. I don't really sweat them any more. It a 13 Cummins QC Laramie. Just this week I got a message to service tire pressure system and the left front sensor was not showing up. Next day, all back...- Noneck
- Post #10
- Forum: General Discussions
-
2019 Ram shaky after 3.5 ready lift kit
My buddy and I both bought new 35 inch tires and 20 inch wheels at the same time from same vendor. Different wheels and tires but both of us got "Fuel" brand wheels. We both have 2500s. He had major issues with vibration while mine were perfect. He rebalanced his tires and saw the lug centric... -
35x12.50r18 Recommendations
Nitro Ridge grapplers. Aggressive looking tread and as quiet as the G2 terra grapplers I replaced. They ride nicer at 60psi than the Terra grappler at 45psi. Better wet traction and I picked up one mpg being able to run them at 60psi. And to boot I went from a 17 inch wheel to a 20 so less...- Noneck
- Post #31
- Forum: Heavy Duty
-
OEM Leather seat covers - OEM Sport - NEW
I bought them but am not going to use them as the center portion doesn't match my 13 Ram leather. It's a perforated neoprene type surface. Let me know if you're interested. Sent from my SM-G965U using Tapatalk -
Factory remote start install
Alfa OBD. Find the thread here and search for it. I installed factory remote start on 2 friends trucks and enabled it with my Alfa. Cost was around $50 for each truck for the parts. Took about an hour to install a resistor wire and enable. Works with their original remote key...- Noneck
- Post #15
- Forum: General Discussions
-
Problem with OEM trailer brake controller install
Does the trailer you are connecting to have electric brakes? If so is the battery good? I think I had that issue that the trailer wasn't showing up when my trailer battery was dead. Sent from my SM-G965U using Tapatalk- Noneck
- Post #2
- Forum: Audio & Electronics
-
OEM Leather seat covers - OEM Sport - NEW
Sent a PM. Didn't hear back. I'll take them if you'd be interested for $250 shipped. Thx Sent from my SM-G965U using Tapatalk -
Projector retrofit hid help
I'd run what you have and see how it works out. I've been running morimoto 55w ballasts for 5 years and still going strong. If your fail they are easy enough to swap out Sent from my SM-G965U using Tapatalk -
OEM Leather seat covers - OEM Sport - NEW
Pm sent Sent from my SM-G965U using Tapatalk -
Wheel well liner question
I sure as hell wouldn't want all that crap blowing into my engine compartment, not to mention water all over all your electrical stuff. Sent from my SM-G965U using Tapatalk -
A question for the AlfaOBD Guru's.....
Not a guru by any means but I'm pretty sure you just go in and enable LED for parking light and turn signal. If you add led bulbs for reverse you'd enable those as well. I just enabled those for my buddies 2015 SL that he added led bulbs to, not the factory LED assemblies, but can't see why it...- Noneck
- Post #2
- Forum: 4th Gen DIY
-
AlfaOBD
Im not sure what the range is honestly. You'll need an overlay for your key with the remote start button and I grounded the wire in the ECM harness for the hood switch but it needs a resistor in it. 1k. I bought the overlays and resistor wire from a member here but forget his name on the forum...- Noneck
- Post #13,295
- Forum: 4th Gen DIY
-
AlfaOBD
Nope. Just went to "reset/replace rf hub" in the alfa settings and entered the pin and reset it. Just did another buddies 2015 the other day as well. Same thing. Sent from my SM-G965U using Tapatalk- Noneck
- Post #13,289
- Forum: 4th Gen DIY
-
Side step question
Have them send you a free set to test. If they fit, they have just opened themselves up for multiple years more sales! Sent from my SM-G965U using Tapatalk -
New style (or Rebel style) grille with Ram letters for Gen 4?
No won't fit the 1500. I guess I've had it 4 months or so and was surprised by it's fit and quality. So far so good. The red LEDs were a little much for me so I unplugged them. May look cool with white LEDs but not really a concern for me. Sent from my SM-G965U using Tapatalk -
New style (or Rebel style) grille with Ram letters for Gen 4?
Ebay. https://www.ebay.com/itm/Front-Grill-For-2010-2018-RAM-2500-3500-w-White-LED-Lights-and-Raptor-lights-/174506156069?_trksid=p2349624.m46890.l49292 Sent from my SM-G965U using Tapatalk -
Do it your self bed liner
I sprayed the interior of my Jeep with Upol and color matched it. I was happy with it but for my truck, I went Linex for the bed. I think it's more durable than a diy kit and has a lifetime warranty. If it were mine I'd do a professional spray in. They aren't really all that expensive. Sent... -
Bed rail question
Try wipe new. It will bring back faded plastic like you wouldn't believe. Sent from my SM-G965U using Tapatalk -
Need HID 9005 5000K Replacement Bulbs
Retro shop. Running a set of morimotos for last 5 years. Just replaced the bulbs little over a year ago and one burned out. They sent a new set without any issues whatsoever. They no longer had the 5500k I was running, only 5000 or 6000 so they sent 2. Great products and service. Sent from my...
Staff online
-
rule18Admin
Members online
- Will29349
- Wild one
- Daw14
- Joseph Godvin
- MaxxHavoc
- KC5TGQ
- Treburkulosis
- JHoward
- Frogman
- Hardracer
- Tom Davis
- Gom
- 6speed4.7
- Ramfanski
- BlackSheepRebel
- Dodge Racer
- Beaniam
- bernieca
- AndyB2
- maxx442
- Bad Tiki
- Jonnyquest69
- CRS1968
- buddy6259
- Travis8352
- dsword
- stevieb92
- dmmcguire
- Chebear
- tron67j
- Taters21522
- Eric Christensen
- Ole man
- ToxicFire
- terrysram
- mike19950
- Michael Phipps
- JayLeonard
- Ludville1
- Jbyron
- knightjp
- Edward Hands
- carid
- Old Fart
- 2003F350
- n8dh
- rule18
- Warlock2024
- dsherman26
- DHundt2022