Search results
-
6.4 intake manifold swap
So let my noob mind ensure I got this right, for this CC setup to work as intended, I'll still block off the square opening with JB PlasticWeld, make it pretty and sealed good, then simply reuse the factory 6.4 PCV?- 13RamR/T
- Post #117
- Forum: Engine & Performance
-
6.4 intake manifold swap
I know this is a couple years later, but do you have a part number for this 2nd restrictor valve you installed? I have almost everything onhand to mod my 6.4 intake; Both 1/4-18 NPT to 1/2" barb brass fittings (one straight, one 90 degree from Amazon), a 1/4-18 NPT tap, JB Plastic Weld, and a BT...- 13RamR/T
- Post #115
- Forum: Engine & Performance
-
First install of Illicit Fab no cut brackets
To OP, can you fix the picture links please... none load -
How to Add Overhead Console
For the OP, can you update all the photos that no longer show?- 13RamR/T
- Post #353
- Forum: 4th Gen DIY
-
5" Carven Exhaust Tips
Invalid code. Price shows $219. Any specials coming up? Black Friday maybe? Looking for more than a 10% cut.- 13RamR/T
- Post #48
- Forum: Engine & Performance
-
-
How to swap out speakers
Yesterday I replaced all 4 of the stock 6x9 speakers in my 2013 Ram R/T with RA4 (Alpine) radio. To be clear, this install was on a standard cab Ram. For all 4 I used a plugin extension that plugged into the existing factory speaker connections. Metra 72-6514 Speaker Harness for Select...- 13RamR/T
- Post #51
- Forum: 4th Gen DIY
-
S&B intake
I went with the S&B based on the quality design and how it pulls its air. Its not a typical "CAI" that sucks in hot engine compartment air.- 13RamR/T
- Post #5
- Forum: Engine & Performance
-
2013 Recall for Body Control Module?
This thread was near the top of my Google search today for "2013 Ram Body Control Module". For the sake of others that have the same issue and search like I do, I'll post. I bought my 2013 R/T used about a month ago. The 3rd brake light and cargo lights would not work so I scheduled a trip to... -
Virtual Modified Wheels on a R/T
Be sure to specify color or you will get matte black as a default... which was what I wanted anyways. 22" R/T Factory Wheel Rim Decal Decals Inlays fit 2011-15 Dodge Ram 1500 -
Virtual Modified Wheels on a R/T
Bought stickers off ebay, cleaned the wheels, and was done in about an hour. Heres the finished outcome. Thanks for the comments :) -
Engine Cover Decal
Great looking cover. This is the color scheme I'm looking at doing for mine. What type of paint was used? Did you use an Adhesion Promoter before paint?- 13RamR/T
- Post #33
- Forum: Engine & Performance
-
8.4 RA4 Radio Fail
Wondering if anyone else has had the issue I'm having. Luckily, mine is covered by the warranty. So I bought my 2013 1500 R/T a couple weeks ago. The dealer selling the vehicle said there was a radio recall to be performed by Dodge then I could take the vehicle. Radio gets replaced and I buy...- 13RamR/T
- Thread
- Replies: 0
- Forum: Audio & Electronics
-
best sound deadener
I used Second Skin sound deadoning on my old '05 Ram. Worked pretty good I thought and it was rated better in 3rd party testing. It sticks well, stays stuck even in high heat, and does not degrade over time.- 13RamR/T
- Post #7
- Forum: Audio & Electronics
-
ATI 15% Underdrive Pulley
On my 6.1 Challenger, I run a 25% UD pulley with no issues. A/C, brakes, etc all work fine. Been about 3 years since installed. 15% would be no problem but you'd want OE back on if doing a SC.- 13RamR/T
- Post #98
- Forum: Engine & Performance
-
Belltech coils
Wipe down a front a rear coil spring and look for a white Belltech logo followed by numbers xxxx-xxx stencilled right on the spring. I have a 2/4 drop and PNs are #4762 for front and #5317 for rear. -
Belltech a good kit?
So I bought my 2013 R/T with a previously installed 2/4 drop. I got the truck up on ramps today and found that its a Belltech spring kit, #4762 on front, #5317 on rear, with Belltech's entry level "Nitro Drop 2" shocks. This a good kit? Wondering if the somewhat stiff ride quality would... -
Throttle body spacer?
TB spacer on a modern Hemi will not improve any aspect of performance. It will make a cool whistle sound and that's about it. Sent from my SAMSUNG-SM-G925A using Tapatalk- 13RamR/T
- Post #4
- Forum: Engine & Performance
-
Lowered 4th Gen Pics - Show Em Off!
I bought this 2013 last week and it was already lowered. Hoping to get this up on ramps today to see what brand of kit was used. Drives just a little bit squirly especially at freeway speeds so gotta find whats up there. Stays straight and tire wear is even on all tires. EDIT: Has a Belltech... -
Virtual Modified Wheels on a R/T
So I dont have photoshop but I do have PowerPoint and fairly adept at making it work as a quasi-photo editor. Not ideal but good enough to get a jist of things. I build everything in ppt, take a screenshot, crop it down, save that to MS Paint, and save as a jpg. Let me know what you all... -
New member from Wa State
Rainy side, over by JBLM (formerly Fort Lewis)- 13RamR/T
- Post #4
- Forum: Introduction
-
New member from Wa State
Hi from Wa State! I was lurking through posts about CAIs and saw some great discussions so figured I'll joinup. Just traded in a '04 Ranger for a '13 Ram 1500 R/T. I've had my eye on the Sport and R/T 4th Gen trucks since they first came out. Mine came with a 2/4 drop already done by whoever...- 13RamR/T
- Thread
- Replies: 11
- Forum: Introduction
