Search results

  1. magician

    Adjust Exhaust Tip Forward From Under Bumper

    X2 on checking that tail to muffler connection for proper alignment. Also, the factory tips do have some adjustment fwd and backwards but I’m not sure about the ones you’ve installed.
  2. magician

    Vibration dampening in doors?

    I took my door panels off and tapped them with the end of a screw driver and listened for any rattles, most of mine came from the places that had plastic welds. I cut strips of sound deadening and worked them in and around all those seems. That took most of them away but the window switches are...
  3. magician

    Factory Threaded Insert Rusted and Bolt Broke

    Let that blaster sit for a night or two and then maybe add some heat to that area and try again. Also use a file to add some square corners to what’s left hanging out and try grabbing and turning. You could also take it to the dealer and see if the guy who does the exhaust manifold bolts can...
  4. magician

    Any Air Bag system gurus here?

    My experience on a work Ram was that the connector looked fine when disassembled but when assembled one of the pins pushed back and eventually backed out enough to ask the headlight go out. Apples to oranges I know but similar in concept. You might try pulling on the wires while connected to see...
  5. magician

    Mufflex for a 5.7 HD

    I just took the Mufflex 24 off of my truck. It’s quiet at idle and has bit of trowel at WOT and some drone at low speeds with the 8 speed in my truck. There was an airy burble that I just couldn’t get used to and that’s why I took it off. Hope this helps.
  6. magician

    Leaking Exhaust Manifolds on my 2018 Ram 5.7

    This has been an issue since I was a teenager, headers always leaked in more than one place most of the time. Times have changed and so has technology but one thing is constant when it come to this issue, aluminum and cast iron heat up and cool down at different rates which has the most to do...
  7. magician

    Speaker help

    X2 on the LC6i. Love that thing.
  8. magician

    Speaker help

    You will get a ton of different options here with those questions. I kept the factory HU so the steering wheel controls would stay functional. I added speakers all around an amp and a DSP plus all new speaker wiring. This and tuning your amp will give you good results for the dollar amount your...
  9. magician

    Upper glove box assembly

    How much and is that the diesel grey?
  10. magician

    Any recurring issues with HomeLink?

    I installed the homelink transmitter and wired it according to the schematic for my truck and then had the sales code added. My new in the box transmitter operated my garage door about 3 times and then just stopped? I replaced the transmitter since the buttons no longer lit up. The new...
  11. magician

    OEM tailgate handle backup camera inop after install

    2nd on the pins being reversed, it’s easier to do than you might think if your not familiar with multi pin connectors. Good luck..
  12. magician

    2017 Console to Jump Seat

  13. magician

    Downshifts with 8 speed

    Mines done it since I’ve had it, gets a little more noticeable when I’m towing but not bad at all.
  14. magician

    Another Warranty Question

    Follow up, I contacted RAM Cares and talked over my issue and was told all work for swapping cylinder head including labor is covered under my warranty and if the dealership tried to charge me I should tell them to call which I did. After talking to RAM Cares my out the door cost was my...
  15. magician

    Another Warranty Question

    I’m guessing it’s simply an extension of the factory warranty by the dealership? The truck isn’t at the dealer I purchased it from which is why I think that way.
  16. magician

    Another Warranty Question

    I was hoping they would chime in. Feels like no matter what the warranty condition is they were going to charge me a couple hundred aside from the deductible. What’s the point of having the warranty as well as having to deal with the headache of this type of work having to be done? My previous...
  17. magician

    Another Warranty Question

    That’s how I feel. If there truly was no warranty I would be charged but every bit of labor related to the replacement, likewise since there is a warranty I should be clear of all but the deductible..
  18. magician

    Another Warranty Question

    My 2015 developed what I suspected was an exhaust leak at both exhaust manifolds. I called dealership that I purchased the truck from and was told that to diagnose the sound would be $150 and it could be deducted if I had them do the work. I was also told my extended warranty had expired roughly...
  19. magician

    Corsa exhaust

    Had it on mine for about 2 years until the neighbors got pissy about the 5am cold starts. It quiets down quick but it’s loud at first. I used to scare the crap out of the smokers every afternoon remote starting it 10ft away. I’m running hot mufflex 24 now and I like it a bit better. I have a...
  20. magician

    Exhaust Manifolds | Warped

    Pulled both of mine today,4 broken bolts and one that required a trip to the dealer and a head removal/replacement if thier guy can’t get it with a welded on nut? If the head comes off I’m replacing the cam and lifters on both sides as well as new manifolds. Might start looking at headers and a...
  21. magician

    Exhaust options 2017 tradesman 5.7

    Just added the Mufflex DOD24 on mine and so far it’s what I was looking for, not to loud and good low rpm rumble with now drown so far.
  22. magician

    Magnaflow14 to a 24

    I just ordered a Mufflex 24 today from Moes, once it gets here I’ll let you know if the videos are close or not. I had the Corsa but the neighbors complained about the 5am cold starts. First edit, installed my Mufflex 24 yesterday and so far it’s what I was looking for, deep low rpm sound and...
  23. magician

    Magnaflow14 to a 24

    You interested in selling that 24”? Does it have the extension to make it 36” long?
  24. magician

    Magnaflow vs Borla and 180 thermostat?

    Sweet, thanks for the info and I’ll let you know the difference soon.
  25. magician

    Magnaflow vs Borla and 180 thermostat?

    That Borla Pro need any extensions? What size Inlet and Outlet. Love to have this with the resonators. I had the cat back but it pissed off the neighbors so much I sold it..

Latest posts

Members online

Total: 655 (members: 20, guests: 635)
Robots: 1,514

Forum statistics

Threads
195,597
Posts
2,872,366
Members
156,406
Latest member
1Popeye

Share this page

Top