Search results

  1. carcandy

    Got all the pieces to finish my tonnaeu cover

    I recently installed a pace Edwards ultra groove cover and got a set of cross bars from rhino rack. They fit in the track in the rails. It will primarily be used for our roof top tent, but should also be handy for kayaks and such. Anyone else run a similar setup? Always looking for ideas.
  2. carcandy

    Got New Wheels? Something to consider...

    This might be common sense to most but I’ve forgotten to do this in the past and it’s left me in a pickle on the side of the road waiting on the right socket to show up. So a lot of us upgrade to aftermarket wheels and tires on our trucks, which most of the time call for different narrower lug...
  3. carcandy

    My iPad/ phone mount solution

    I was already invested in the Ram Mount system and wanted something that wasn’t intrusive when not in use. So I used the ram t slot rail in the upper cubby. just mounted it with some screws( had to make one small hole in the radio bezel to clear the middle screw) if it loosens up over time...
  4. carcandy

    Installed Airlift Air Bags

    So after leveling the truck I’ve had a few heavy loads which definitely made the truck squat in the rear. I rectified that this weekend with the airlift kit with the added wireless controller. So much nicer with the controller to make adjustments on the fly without needing a separate air...
  5. carcandy

    No Under Hood light plug?

    So I ordered all the interior light parts and while I was at it I figured I’d do the under hood light. Well to my surprise I don’t have the socket where it always seems to be on the passenger side cowling. Anyone have any idea? Or did they possibly change it up? It’s a 2018 2500 big horn...
  6. carcandy

    Finished Interior Lighting

    Finally received all the pieces to complete my interior lighting. Did the under dash lights and lights in the rear seat. I switched all the bulbs to led but kind of bummed out the rear seat light kit came with the led but it’s more of the warmer yellow hue. No big deal, makes sense I guess since...
  7. carcandy

    Leveled 2500 / rear airbag question

    Hey all, back on the forum after taking a few years off due to not owning a Ram. But back in the Ram game as of a few weeks ago. This is my new 2018 4x4 Big Horn. I plan on doing a jack of all type truck (commuting, towing, mild over-landing) rig. As far as the suspension, so far I’ve done the...
  8. carcandy

    Back after a few year hiatus

    Well I used to be fairly active in this forum back when I had a 2011 1500 but haven’t been on in years. Went to the dark side for a while with a GMC Sierra that I made my camping/ overland rig. Finally got back in the Ram game with a 2018 Ram 2500 CTD Big Horn a couple weeks ago. Excited to get...
  9. carcandy

    2011 Factory Wheel and Tire Take Off's 17's

    Hey everyone I'm selling my factory wheels and tires from my 2011 ram SLT. They are the 17" aluminum wheels with Goodyears. They where taken off at about 24,000 miles. They do not have the TPMS installed, just standard valve stems. Asking $600 OBO willing to meet at a reasonable distance...
  10. carcandy

    Dipped My XD Wheels

    Over the weekend I dipped the "Bead Lock" on my XD Enduros. I'm not super happy with the way one of the wheels turned out. When reinstalling the bolts it twisted some of the plasti dip off. I'm going to have to respray that one. I'm going to see how I like the red over the next few weeks, then I...
  11. carcandy

    Tire Pressure Recommendations for 35's

    Hey guys, I switched to new tires which are 35''x"12.5 General Grabbers it says max recommended PSI is 65, they're E rated tires. I had Tire Kingdom also put the TPMS in the new setup. Now they only aired them up to 40PSI. That seemed low to me and when I questioned them, they said the sensors...
  12. carcandy

    First Attempt At Plasti Dip

    So I tried my first attempt at Plasti-Dip and I think it came out pretty good. I did my Fuel door and Hitch cover. The fuel door was chrome plated aluminum and the FL salty air hasn't been good to it. So I sanded it down and coated it. How fuel resistant is plasti dip? Do I need to be extra...
  13. carcandy

    St Lucie Mud Jam (Florida)

    Sooo, Anyone in the Treasure Coast Area going to St Lucie Mud Jam? I've never been and was thinking about going. It's the weekend of July 21st. Home Page
  14. carcandy

    WTT Chrome Grill for White Sport Grill

    I know this is probably a stretch, but I'm looking to trade my chrome grill shell for a painted one. Must be white. Let me know if any of you guys with white sports want a chrome grill ;)
  15. carcandy

    Shocking Issues

    Ok so I wanted to get new shocks all the way around for awhile now, especially after the 2.5" level. I guess a lot of people were going with the 2500 shocks in the front. So I ordered some Skyjacker M95's pictured below. They were way to big in the front. The rear were fine. So skyjacker doesn't...
  16. carcandy

    Finally Got The New Wheels and Tires!!!

    After camping out at the Fed-Ex office yesterday my wheels finally came in. Rushed over to the tire shop to get these bad boys on. To date the specs are: 2.5/1" level, 1.25 RC Body Lift, KMC XD Enduro Wheels (17x9 5" Backspace), General Grabber 35"x12.5/17. I'm really diggin the stance it...
  17. carcandy

    4.7 Bolt up Exhaust?

    Poking around your site it seems everything is for Hemi's as far as exhaust. Do you have a muffler/ cat-back system thats direct bolt in for the 4.7? I hear mufflex being thrown around a lot. What can us 4.7 guys get from you?
  18. carcandy

    Putting new Tires On Now What About Gears?

    Ok, So two weekends ago I got the RC 1.25" body lift done. I already have the level done. Everything is ordered now I'm just impatiently waiting. On order is: 35x12.5r17 General Grabbers KMC XD Endura 125 17x9 0mm offset 5" Backspace And new shocks (Skyjacker M95's) Hopefully this all...
  19. carcandy

    Another Tire Fitment question...

    Okay so I've tried searching and viewed the sticky but I still want to get everyone's opinion if this combo should fit. For the tires I want to go with The Nitto Terra Grapplers size 305/70r17 The wheels I'm looking at the Procomp 7031 The specs are: 17x9, 5x5.5 Center: 108 Offset: -6mm...
  20. carcandy

    Level kit completed and Conversion Question

    So I completed a 2.5'' level on my 2011 SLT 2wd and I must say it was a PITA! The alignment is done and after driving it for a few days and letting it settle it sits a hair higher in the front. So I'm thinking about going ahead and doing a 1" in the rear. While I had everything apart I...
  21. carcandy

    Under seat Gun Rack

    Sorry for the crappy night time cell phone pic, but this was my first Mod. I used a window kit but didn't use the wedge brackets. Just drilled holes in the bracket itself. Then I drilled the seat frame for the screws.
  22. carcandy

    Supreme Suspensions?

    Brand new member and Dodge owner here. I've been poking around looking at leveling kits and came across this on ebay: eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices Has anyone had experience with this brand? I'm looking at using this in the...

Latest posts

Members online

... and 17 more.
Total: 1,272 (members: 67, guests: 1,205)
Robots: 1,455

Forum statistics

Threads
195,446
Posts
2,870,372
Members
156,154
Latest member
RedRAMr

Share this page

Top