Search results

  1. D

    Add CHMSL with camera

    Wife just bought a 2019 2500 with 8.4 screen with Nav. I was hoping to add the 3rd brake light with camera for hooking gooseneck up easier. I was able to do it in my 2013 by adding a camera input but wanted to see if this 2019 might already have the wiring in place for oem camera even though...
  2. D

    aftermarket back up camera soft key button in '14? is it an option?

    I have the button for rear cam on my 2013 with factory 8.4. Did not come with cameras factory, I added the factory kit for tailgate and activated with alfa. I also added an aftermarket camera on the back of my wife's horse trailer and tied it into the CHMSL feed, works great other than every...
  3. D

    I found a way to receive your own PIN CODE without the dealer :)

    Right, it works in my 2013 2500, but I'm not seeing it in the list of options under RF hub for a 2012 or older 2500
  4. D

    I found a way to receive your own PIN CODE without the dealer :)

    I'm not seeing the ability to pull the PIN code from a 2012 2500 in alfa, is this correct or am I missing something?
  5. D

    Adding keyless entry 2012

    I just got done adding factory remote start to my 2013 and told my friend about it. He has a 2012 that does not have keyless entry. Am I able to add keyless entry to his truck with a fob and my alfaobd?
  6. D

    Alfaobd and aux switches

    CSM doesnt show up in my BCM on my 2013. Any suggestions?
  7. D

    Auxiliary Switch Bank Application Chart

    Which switch would I need for my 2013 2500, it has Traction control, Tow/haul, Exhaust brake, blank and Tire light load buttons on top. Need the 5 aux. Sorry to drag up old thread. Thanks!!
  8. D

    Passenger door ajar will not go out

    Fixed it. I have no idea how it got changed but I had to go in with Alfaobd and change the passenger door ajar signal. For some reason it was looking for the exterior door handle, not the ajar switch. Found it by reading my log file. Very important to have logs turned on when you are...
  9. D

    Passenger door ajar will not go out

    I can't get my passenger door to show closed on the EVIC. I tried a new door module on that side, no dice. New switch/latch assembly, also no good. I followed the pur/white wire from the door switch all the way to the BCM and checked continuity, got .2 to .3 ohms resistance. I went so far as...
  10. D

    Installing OEM backup cam

    Figured it out. Bad install instructions about the connector in the driver's footwell. It tells you to populate the connector after putting the harness through the firewall boot incorrectly. Wired it right and it worked like it was factory!
  11. D

    Installing OEM backup cam

    Long time lurker, first time poster I installed the OEM backup camera kit into my 2013 SLT 2500 yesterday. It has the VP3 radio. 82214240AB is the kit number on the box. I followed the instructions as written. I used my autoenginuity to turn the camera settings on. I now get an image when...

Latest posts

Staff online

Members online

... and 8 more.
Total: 1,643 (members: 58, guests: 1,585)
Robots: 1,890

Forum statistics

Threads
195,596
Posts
2,872,331
Members
156,401
Latest member
jesmich

Share this page

Top