So the other day I noticed that my passenger rear window will not go down. I pulled the panel today and bench tested the motor.
It works In both directions. Also tested the switch, and replaced it. Window will go up via the switch, but not down. The driver door switch, and rear door switch...
Evening all,
Anyone with a 09-16 hemi experience a starter that almost acts as if the battery were low/dying? but then the battery test ok, alternator tests ok? not much left besides the starter?
It'll crank kinda labored...and start. maybe 4 seconds each time. if you count our 4 seconds...
Anyone have a recomendation of a complete suregrip kit (inclusive of what of I would need to go from my factory open diff to a suregrip/posi)
I'm a bit overwealmed with the carriers ranging from $300 to $1000 from Yukon...OEM offerings..etc.
Best to look for a low mileage takeout? Start new...
Does anyone have the proven recipe to disable the automatic door lock feature?
Or
To make it so when you open the driver door, all door locks unlock.
I have googled, and found a few claimed door/key/seat belt sequences, but I cannot for the life of me get one to take.
I have shut off the...
Havent dove into this project yet. So may be a simple answer, but I recently bought a set of mirrors that have puddle lights, and blinkers on them.
My truck has heated power mirrors, but no mirror turn signals or puddle lights. Both of which the two mirrors I bought have.
The mirrors do...
Title says it all. While driving, and going over large bumps (fairly rough RR tracks) The truck will die...but then start right back up in neutral while rolling.
I have researched the issue and most similar occurrences appear to have engine codes, or the electrical system / throttle body...
Hey all, After my Pre-Runner conversion, and my 4th gen tailgate install, I started getting the sticky tailgate handle that didn't want to close all the way. This would cause the tailgate to open by itself (which i see some blame on the electric locking mech, which my truck doesn't have)
I...
Alright guys...here's my current dilemma. Its long, i'm sorry...
I had a business trip 3 ours from home. Ended up taking my truck. Suspension is stock minus a 2 inch level in the front. Always ran/drove smooth.
ya'll all may remember i was in a minor non-fault accident about 5 months ago...
So when i picked up my truck after being painted, i noticed that one of the tailgate straps (drive side if it matters) was much much looser than the other one. The strap could probablystand to be almost 1/4 inch shorter. Since i had dropped 2 tailgates at the shop, both of which were...
Fired up the wifes 2015 Charger this morning and got a BIG huff of white smoke out the exhaust. No noises, no other issues.... Just one big seafoam esque huff of white smoke...cleared up in a few seconds and off to work as normal.
has anyone elses 09+ hemi done this? Moisture in the cats...
My brother in law has a 2004 QC 2500...and i have a 2007 QC 1500.... what ebay/amazon seat covers...lets say under $100 aren't total junk?
i see countless sets on ebay/amazon for $30 and less. but they mostly look like sloppy sofa covers.
help me out here..what is out there for QC 3rd...
Anyone find a good aftermarket 4th gen tailgate cap/spoiler. I have a 2010 tailgate, and the plastic cap is a little rough. I pretty much see the oem cap, and copies of the oem cap...anyone find a nice aftermarket option that may be a little tougher? If I don't find something better than what...
Hello All,
Needed a place to start posting pictures of my fiberwerx install, and amerihood, and the various other upgrades my 07 Ram 1500 is undergoing.
This truck started life as a hemi 1500 bighorn in mineral gray. I bought it out of college, and its been a remarkably great truck...
So the front upper, lower control arms, and knuckle are toast on the driver side of my 2007 ram.
To keep this semi-brief, i'm looking for advice on a cost effective kit, or what components to replace the damaged components with. i really only want a mild lift under 4 inches. I'm kicking...
Hello all,
I'm pretty novice when it comes to installing a head unit in a car. I'm in need of a GPS unit for my 2007 ram 1500 with the 7 speaker infinity system.
Its originally just a double din 6 cd changer.
I did a little research and found the Jensen VX7021 and Blaupunkt San Antonio...
Anyone know who makes this one?
Is this an early Nfab? or a Kore?
I'm contemplating the Nfab...but i noticed it sticks out much further than i like.
i keep stumbling across pictures of the alleged Kore...but i don't even see where they offer it to the public for a 3rd gen...
i hear horror stories about "ebay headlights" but i believe that is more in reference to guys wanting to wire in fancy hid's or LED's mostly on 4th gens...
or...is the above completely incorrect, and all of these are junk, and i'll instantly regret these.
New For 2006 2007 2008 Dodge RAM...
Anyone ever do their own bed liner with a kit like this?
Custom Coat Black Base 6-Liter Gun & Text Bedliner Kt
I have one in mine, but my father just bought a new ram w/o one.
I was even thinking of doing about 2 inches up on the bottom of my doors, and possibly the inner pinch seams to...
Anyone tried one of these?
A stuck thermostat caused a unsourcable leak in my plastic tanked oem rad.
Always preferred welded aluminum tanks.
Any experience?
CH3010302 New All Aluminum Radiator OEM# 55056682AB | eBay
Morning Guys,
Have an odd issue going on, and not sure if i fixed it or not.
07 hemi, 90K miles
My temp gauge deflected slightly to the "H" side the other day, and was accompanied by antifreeze smell, and even a small "leak" that i still haven't exactly sourced.
So after noticing...
Hello all,
I had a thread a while back about if anyone made a mopar badge that could replace the ram badge on a 3rd gen, and specifically my 07. The challenger mopar badge was too small, as well as others i found...until this little gem..
New Black Mopar Auto Emblem Trunk Fender Badge...
Hey guys. Looking for a fiberglass srt clone, or ssk hood. Prefer something near NE ohio.
Can ship, but hard to pay $175 freight on a $250 duraflex hood... all these companies are in california...unfortunately.
Let me know what you have. Open to factory srt hood, but not paying $900 for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.