Search results

  1. R

    Flowmaster 53553 50 Series Big Block

    on a half ton there are 2 little bullet type glass packs in the tail pipes right in front of the tips. i left those. to me it wasn't worth cutting up the tail pipes just to remove those little things. on my 14 2500 6.4 i have right now i've only removed the resonator because it looked awful...
  2. R

    Flowmaster 53553 50 Series Big Block

    i used to have that same exact muffler on my 09 1/2 ton. if it is quieter than the regular delta flow 50 it wasn't by much. the truck sounded great but with pulling the travel trailer it had a drone. it is what it is i guess. there aren't hardly any options for a 3.5" muffler and all the...
  3. R

    Hemi 6.4 Gas Engine Knock

    i've got a tick that sounds like exhaust hot or cold. (it's not exhaust) really embarrassing passing vehicles in town and the shitty sound echos off their vehicle when passing them. i've noticed under light throttle with the mds disabled it isn't as loud but soon as the mds kicks in it's...
  4. R

    Typical 6.4 exhaust noise?

    i really don't think it's the exhaust anymore. i believe it's a mechanical issue like lifters that resonate through the exhaust. has anyone done a mds delete with the srt or performance aftermarket lifters and eliminated that nasty sound?
  5. R

    Does the 6.4 have lifter issues like the 5.7??

    i used to work at an exhaust shop. we would cut off or break the remaining bolts, weld nuts to them, heat up the nub of a bolt and nut and turn them out slowly. if you work at it enough they usually came. crappy thing is the new parts that replace them aren't any better than the parts that...
  6. R

    Does the 6.4 have lifter issues like the 5.7??

    my 2014 2500 6.4 has had the lifter noise for a while. sounds like a nasty exhaust leak under any kind of load and rpm. i've been told by 2 different dealerships that it's normal. after camping season is done in october i'll be looking for a 3 opinion. i'm getting tired of hearing it.
  7. R

    New Pcm programming?

    does anyone know of any companies that can change the programming in the pcm as far as shifting, and turning off the mds? i had a bad experience with a diablosport tuner that left me without a truck for a week. the places i did find can't seem to return any of my emails. ideas? thanks and...
  8. R

    Hitch receiver shank adaptor stuck

    i still use the e2 setup from my 1/2 ton on my current 3/4 ton. everything is the same except i went to the 2.5" shank and a different drop because i didn't like the idea of having a sloppy spot in the hitch setup. my 2.5" shank is made by equalizer.
  9. R

    Diablo sport I3 tuner problems

    has anyone used the i3 tuner from diablosport and had any issues? after installed the 87 octane tune and drove home i tried use the tire size function and it failed and gave me an error code. now i have the red security light flashing as well as the abs, airbag, and 4x4 disabled flashing at...
  10. R

    2014 ram 6.4 oil consumption

    i have a 14 6.4 with just over 58k miles. i just checked the other day because i'm due soon and i've burned 1/2 a quart in just under 6k miles. i'm using the redline 0w-40 oil with a bg moa additve. before i changed the oil the last time i also used an engine cleaner to bring it back to new...
  11. R

    Typical 6.4 exhaust noise?

    i like the idea of the magnaflow kit but it is super expensive. i'd rather just swap the muffler. the pipe is already mandrel bent stainless.
  12. R

    Typical 6.4 exhaust noise?

    revive away. i'm still searching the internet weekly for a fix for the noisy sob. i still haven't found anything yet. i'd like to know if any of the cars have this same issue or if it's just truck thing. this is the only thread that i have found were people have experienced the same noise...
  13. R

    No reserve.

    my 31 gallon tank usually takes 26ish if i run it to 1/8 remaining or so. never understood why they advertise on thing and it's not really true. my 09 1500 was the same way, i could never fill it to the advertised capacity. it's kinda like the bag of chips you buy that's only half full!
  14. R

    Shell rotella gas truck

    following. i'd be curious to using this long term. i hate how much i can hear my truck tick with the windows down passing cars.
  15. R

    Mds disable and using different oil

    has anyone that has disabled their mds changed oil viscosity say 5w-40 or 10w-40? just curious as i plan on buying a tuner in the near future.
  16. R

    TPMS delete?

    i rented the scan tool from him to change my tpms and it was a breeze. set everything to 45 psi. i had a question regarding one of the steps in his directions and he was able to call me back pretty quickly. i would recommend him. if it's something you're interested in i'd find out how long...
  17. R

    Is this normal for HD brakes?

    i had issues with my truck randomly squeaking as well and i looked into it. the front pads are semi-metallic and the rears are ceramic. hence the dust and squeaks. when i change the front brakes it will get ceramic pads as well. i have aftermarket wheels that are pretty open and it sucks to...
  18. R

    Wheel offset for 2500

    I have moto metal 962. 20x9 with offset at 0. 35x12.5x20 nitto trail grapplers. Bottom of wheel well in back has been trimmed for extra room but otherwise no rubbing. The truck has only a front level.
  19. R

    6.4 Hemi Gear Swap

    does anyone from southern wisconsin know of a reputable place that does gear swaps? not a lot of information out there.
  20. R

    Aftermarket or OEM tpms sensors

    Reason for asking is the 09 wheels I picked up have the older aluminum stem tpms sensor and mine has the rubber stem. I.e. newer style. I'd leave the aluminum ones in but they are a different frequency.
  21. R

    Aftermarket or OEM tpms sensors

    I just picked up a set of 09 3/4 ton wheels for my 14 and I need to switch out the tpms sensors to the newer style so can use them as winter wheels. Anyone had issues using aftermarket?
  22. R

    Initial impressions of 2018 3500 6.4L camping trip

    how about running 87 with no ethanol? they can be found around by me in wisconsin if you look hard enough. it's cheaper than premium and only about 40 cents higher per gallon, for me anyway.
  23. R

    hellcat/challenger shorty headers on 6.4 2500?

    does anyone know or has tried to get a hold of hellcat/challenger shorties or an aftermarket equivalent and put them on their 6.4 2500? i realize the y-pipe would have to be modified but it beats the price of long tubes and was also wondering if it would get rid of the hemi sewing machine noise...
  24. R

    Typical 6.4 exhaust noise?

    mine ticks cold or warm. it is sounds like it's coming from the manifold/y-pipe area. it doesn't have any exhaust leaks. i can't hear it in the cab with the windows up but i tell yeah i hear it echo off everything i pass with the windows down. that's my only complaint with this thing. i...
  25. R

    Typical 6.4 exhaust noise?

    i know this is an old thread but has anyone eliminated the sewing machine noise with headers? i'd love to have shorties because long tubes are stupid expensive but i see no one makes them.

Latest posts

Staff online

Members online

... and 14 more.
Total: 1,262 (members: 64, guests: 1,198)
Robots: 1,610

Forum statistics

Threads
195,440
Posts
2,870,325
Members
156,149
Latest member
BackhoeCowboy

Share this page

Top