Search results

  1. R

    AlfaOBD

    Just more costly to repair. :-) Sent from my SM-G950W using Tapatalk
  2. R

    AlfaOBD

    I did Sent from my SM-G950W using Tapatalk
  3. R

    AlfaOBD

    I'm from Canada as well. I want to say thanks to Ghost_Ram for starting this thread and all the contributers. So much useful information in such a short period of time! Thank you! Merry Christmas and Happy New Year! Am I still allowed to say that? Sent from my SM-G950W using Tapatalk
  4. R

    AlfaOBD

    Good to know. Who knows what the engineers were thinking between model years but I can tell you the halogen lights even with factory projectors are woefully inadequate. I drive about 130Km (95 Miles) every weekend where there are no street lights for the total way. I ended up buying a 42"...
  5. R

    AlfaOBD

    Hi Roman217, Just so you know, I have never touched those settings and are from the factory. I bought my truck new and the only thing I have changed are Fog LED, drop out and window etc. I wonder if there are different specifications for Canada vs. USA vehicles based on the amount of available...
  6. R

    AlfaOBD

    Here is my Canadian 2016 Ram 1500 Sport with factory projectors and factory DRL on turn signal strip. https://drive.google.com/file/d/1jEtkklqUCq0AvsJ8ySe_-8xTqIje0xCE/view?usp=drivesdk Sent from my SM-G950W using Tapatalk
  7. R

    AlfaOBD

    Right. Alpha can only make changes to the options preloaded in the BCM by the manufacturer. Sent from my SM-G950W using Tapatalk
  8. R

    AlfaOBD

    Sounds like a plan. For my 2016, the only issue I had for the fog lamps was even with the LED in and setting Alpha to LED enable, the computer would shut down the lamps everytime when I turned them on in accessory or run position without engine running. Once I shut off the truck, waited for...
  9. R

    AlfaOBD

    When I set my fog lamps to LED but left the halogen bulb in, the computer shut off both lights after flashing them one time each. Not sure about the HID setting but would presume it would be the same. Best if you can replace both at the same time as the HID setting isn't individual like the...
  10. R

    AlfaOBD

    Just finished re-orienting the LED emitters to 12 and 6 in the verticle fog lamp housing. Big difference in throw and intensity. This makes sense since the reflective surface is verticle. However, even with the Alpha setting to LED Fog enable, the computer shuts off the bulb but only in the...
  11. R

    AlfaOBD

    Any place like Amazon or a vendor here have them. Usually you have to buy the Canbus/PWM cancellers separately. You would just buy the bulbs when you purchase. Sent from my SM-G950W using Tapatalk
  12. R

    AlfaOBD

    Ok thanks. Have to get back under the truck. Sent from my SM-G950W using Tapatalk
  13. R

    AlfaOBD

    One thing I noticed is the LEDs are fine with the truck running however, with the ignition in accessory pr run position without the engine running, the LED fogs are turning on and off by themselves. It's as if the vehicle thinks the bulbs are burnt and sending a signal. It doesn't look like...
  14. R

    AlfaOBD

    That is awesome! Thank you! Sent from my SM-G950W using Tapatalk
  15. R

    AlfaOBD

    So I swapped fogs this morning, left off the canbus adapter and set Alpha to LED fog enable and it works! No flickering so far and came on perfectly. One question I have is everyone recommends the LED emitters be set to 9 and 3 o'clock however, when I look at the reflector shape of the fogs...
  16. R

    AlfaOBD

    Awesome! Thank you. Going to try and find time tomorrow. Sent from my SM-G950W using Tapatalk
  17. R

    AlfaOBD

    It's located here if you want to try. Other people have vaguely confirmed it works and I'm trying to find time to install my LED fogs but if you have time, it would be nice to confirm and plus you wouldn't need the extra cancellers on each light if successful. LED is under this section.. "...
  18. R

    AlfaOBD

    Did you buy Alpha and make changes or are you done with it as is? Sent from my SM-G950W using Tapatalk
  19. R

    AlfaOBD

    Actually you are right. When I turned on the fogs after changing alpha, the fogs came on for half a second and went off until I changed it back. Sent from my SM-G950W using Tapatalk
  20. R

    AlfaOBD

    Makes sense as I just changed my fogs to LED enable and the bulbs are now out. I still have halogens in. But no bulb out warning and the indicator shows they are still on. Changed it back and they came back on. Just testing as I'm installing some DDM Saber LEDs into the fogs this weekend and...
  21. R

    AlfaOBD

    Hi guys, Does anyone actually know what changing a light to LED does? I've read people have removed resistors and Canbus adapters and such but does it just disable bulb out warnings or does it change the PWM frequency providing a more stable voltage so an LED can operate unimpeded. The same...
  22. R

    AlfaOBD

    Here is my Canadian 2016 Ram Sport with factory projectors and mandatory DRL https://drive.google.com/file/d/1jEtkklqUCq0AvsJ8ySe_-8xTqIje0xCE/view?usp=drivesdk Sent from my SM-G950W using Tapatalk
  23. R

    DDM Tuning HID Ballasts

    I ended up ordering the DDM Tuning Ultra Canbus HID kit with 5500k bulbs based on their recommendations. I also bought pre-drilled dust covers from Brightsource.ca. they are supposed be deeper than stock. Also got DDM Saber 9005/6 LEDs for the Fogs. Will be posting pics. Sent from my...
  24. R

    DDM Tuning HID Ballasts

    Thank you Dmopar74, I kind of thought so as I saw a post in a different forum saying the ultra worked in their 2016 and DDM's description for tested vehicles are identical. Appreciate the response. Sent from my SM-G950W using Tapatalk
  25. R

    DDM Tuning HID Ballasts

    Hi Everyone, I have been searching the forums for a while on which HID kit to get for my 2016 Ram Sport. I have the halogen projectors. I also have AlphaOBD. From all the searches I have done, it seems everyone has installed the DDM Tuning Plus Canbus ballasts with no issues. I opened a...

Latest posts

Members online

Total: 543 (members: 16, guests: 527)
Robots: 1,144

Forum statistics

Threads
195,557
Posts
2,871,842
Members
156,319
Latest member
amdwilsns01

Share this page

Top