Search results

  1. M

    Ride height with AlfaOBD (air suspension)

    Height Sensor check operation is only used after you set values. the best thing to do is go back to dealer and play " not sure what happened " or find a budsy who you can read the ACSM from and set with his values.
  2. M

    ram rebel 2021 - duratrac tires

    Thanks for checking. I saw that too but the local law here in Quebec is that to use an All-season AT tire, it has to have a snowflake/mountain image on the tire. I won't have the truck for another 2 months so i can't check myself. I'm hoping someone who has this truck with the stock tires can...
  3. M

    ram rebel 2021 - duratrac tires

    Hi everyone. Are the stock 18 inch tires winter rated ( have snowflake) thanks
  4. M

    P1524 - Oil Pressure Out Of Range Camshaft Advance / Retard Disable

    I would if I lose pressure again, but in my case the swapping of the oil filter fixed my problem. If it were the main and rod bearings, changing the filter would have given me the same results.
  5. M

    P1524 - Oil Pressure Out Of Range Camshaft Advance / Retard Disable

    Just putting this here as a learning lesson for me and hope this can find the way to any other hobby mechanic out there trouble shooting this code. I had replaced my oil at 98k and at 102k, the check engine came on and gave a code P1524. This is a low oil pressure for the MDS system and there...
  6. M

    Odd noise coming from cold engine.

    Have you replaced the clutch fan system ? sounds very familiar to me ....
  7. M

    Oil Pressure Whats yours?

    Just like to add to this topic as I recently had an Issue with a check engine and made my way to this forum page ( thanks all for all your input!!) I had an error code P1524 - Oil Pressure Out Of Range Camshaft Advance / Retard Disable. My pressure when the engine was warm to normal temps was...
  8. M

    Alfaobd stuck in plant mode help

    Go do a height sensor check in Alphaobd. This will remove the ASCM from plant mode
  9. M

    Urgent Help Needed - AlfaOBD stuck in-plant mode

    Those are some pretty odd numbers. You can do a height sensor check to remove the ASCM out of plant mode. This will finalize its settings.
  10. M

    LSD option for 2016 rebel

    thanks for the input. truetrac is the way im gonna go thanks
  11. M

    LSD option for 2016 rebel

    I bought this truck with an open diff. Now that warranty is up, I'd like to add an LSD to my rig. What options do i have for this truck with a 3.92 gear ratio ? I can only seem to find the OEM mopar version of the LSD.
  12. M

    Do you see any repercussions to permanently turning off the mds?

    The cam failure is not caused by the MDS system, its caused by the lack of oil pressure being pumped to the top of the engine when the engine is running idle. Some hemi ticks are caused by the MDS solenoid not being strong enough to engage/disengage it, usually starts happening after 120 000km...
  13. M

    Air ride⁹

    The air system has auto leveling while you're driving. Enabling tire jack mode stops the auto leveling from working only when you are not moving. As soon as you start moving it will automatically enable the auto level. There are a few ways you can stop the auto level process. Pulling the fuse...
  14. M

    Need lift recommandations

    I second Superlift. They do it the right way and the kit swaps out the knuckle so you get to keep your upper controller straight which is much better for alignment. Superlift been arouind since the 70's with all their Chevy and ford lifts. I was very happy to hear that they started lift kits for...
  15. M

    Brutal Factory Air Ride

    Sounds like you have to much air in the bags. I bet you're bouncing like a basket ball on the road when you hit a bump. Set your links in front to 3"7/8 (measured center to center on the ball cups). This setting will allow your 35's to clear and make your ride confortable. If you got adjustable...
  16. M

    How To: Add Factory Keyless Enter N Go

    With AlphaOBD it shows Hardware number 68245484ac. It also shows Remote start antenna: present.
  17. M

    How To: Add Factory Keyless Enter N Go

    Anyone know where the Antenna for the remote start is ? 2016 ram factory installed remote start thanks
  18. M

    Ride height with AlfaOBD (air suspension)

    I was told its part of their procedure after they finish writing the values to make sure the sensors take the new values right away and finalize the procedure. If the test fails, you either set the values to high or you have a faulty sensor and you can go back to write values and adjust...
  19. M

    Ride height with AlfaOBD (air suspension)

    I found out last week that when you go to write your height values, the ASCM goes into plant mode so the air suspension doesn't move while you are programing. It stays in this state until you run a height sensor check, and then it properly writes the values to the ASCM and resumes normal...
  20. M

    Ride height with AlfaOBD (air suspension)

    Guys, after modifying your suspension height values , make sure you do a height sensor check. This will remove the ASCM from plant mode! Then clear your codes, make sure engine is not running for last part
  21. M

    Remote start issues with activation distance

    I just had mine serviced because my range sucked. There is a TSB from RAM to clean the antenna wire/ground under the console. Don't have the number handy just relaying what was verbally told to me.
  22. M

    Seat heaters won't stay on after remote start

    Before saying the heating element is bad, check to make sure the connectors under the seat are cleaned and free from corrosion. Get a can of contact cleaner and clean them. A small variance in power will turn off the heated seat
  23. M

    Engine noise

    Update on the noise. I had to take my truck in to fix the air suspension. I mentioned the engine noise at cold start up. They called me back and told me my lifters and quit possibly the cam shaft will need to be replaced. The squeaky noise is the AC compressor clutch. Searching the net has...
  24. M

    Engine noise

    Someone mentioned the clutch fan assembly, but i've heard that noise and its nowher as close to that sound. The noise is still happening even with the ventilation turned of, no ac or auto setting is turned on. To test alternator, would i just remove the belt and start the truck and see if it...
  25. M

    Engine noise

    doh. Linked my studio link. its fixed thanks

Latest posts

Staff online

Members online

Total: 412 (members: 16, guests: 396)
Robots: 1,257

Forum statistics

Threads
195,468
Posts
2,870,595
Members
156,177
Latest member
joeyoliver45

Share this page

Top