Search results

  1. RVA Ram

    Aftermarket Wheel Lug Nut Torque for 1500

    Curious what torque people are using for their aftermarket wheels/lugs. 130 ft-lbs like stock or something lower?
  2. RVA Ram

    Alignment after greasing UCA frame bushings?

    I recently greased my frame bolts/bushings (Icon Delta Joint), and to get the grease to flow through the bushing I had to loosen up the bolts. Would loosening these bolts warrant an alignment?
  3. RVA Ram

    PSA...Use Some Lube! King 2.5 Preload Adjustment

    Just thought I would post this friendly reminder. I was having an absolute horrible time adjusting the preload on my kings. Truck was on jack stands, so coilovers were not loaded. I couldn't get the preload clamps to budge after a couple turns. Added a small amount of WD-40 to the top and bottom...
  4. RVA Ram

    Recommendations for license plate lights for aftermarket bumper

    Looking for recommendations for license plate lights for an aftermarket bumper that doesn't come with any. Would love something that's plug and play.
  5. RVA Ram

    King shocks backordered/delays due to Covid

    I was able to pick up a front set of King coilovers, but the rears are on backorder until September. Anyone else running into this issue? Or know of anyone that has these in stock? Seems like the entire automotive industry is running into this. Everyone's at home working on their trucks I guess.
  6. RVA Ram

    Any experience with Coastal Offroad DIY bumpers?

    Has anyone purchased one of these and how was your experience? Seems like a great starting point if you wanted to change/modify the design. It's not a huge savings over a premade bumper if you consider shipping, painting and your time. Would be a fun DIY though...
  7. RVA Ram

    Truck Bed Tire Strap Install

    Installed the Dirt King Fabrication tire strap today. I left enough room for a 35" or 37" spare tire. I decided to use only one of the included D-rings and use the bed corner mounts instead. I figured less holes in the bed is better. First I used a stepped drill bit to create a 7/16" hole...
  8. RVA Ram

    How to Center Steering Wheel?

    Hi All, I have a 2014 RAM 1500 with fox 2.0's and Zone UCA's. I've taken the truck to multiple alignment places and all of them have had a hard time centering the wheel. The dealership has tried twice now and they can't fix it. It looks like some of the older models had a drag link with 2 bolts...
  9. RVA Ram

    Tire and Wheel Sizing with Fox 2.0 Front and Rear

    Will I have any issues with the following wheel and tire combo if I'm running Fox 2.0 coilovers and shocks with Zone UCA's? Wheel: Method NV 17 x 8.5; 0 offset; Backspacing 4.76" Tire: BFG All-Terrain T/A K02 LT285/70/R17 Thanks!
  10. RVA Ram

    Loud knock after Fox 2.0 and Zone UCA install

    Hi All, I recently installed the Fox 2.0 coilovers and Zone UCAs. Since installing them I have heard a loud knocking noise or pop sound when turning at full lock. This has only happened twice. I am on stock 20 inch wheels and tires. Any idea what it could be? Thanks
  11. RVA Ram

    What ball joint tool is everyone using for UCA replacement?

    Hey Guys, I recently installed the Fox 2.0's on front and rear and replaced the stock UCA's with the Zone UCA. It was a PITA to get the old UCA to release from the spindle. I bought a tool from autozone that barely fit. I'm wondering what tool is the correct tool for this?
  12. RVA Ram

    Question about Zone UCA's and ABS wire

    Hi All, I recently picked up the Zone UCA's and after receiving them noticed there is not a bracket on either arm to reattach the ABS wire to. What has everyone else done to secure that wire? Is it ok to just leave it hanging? Other UCA's such as the Total Chaos have a bracket that you can zip...

Latest posts

Members online

... and 6 more.
Total: 1,191 (members: 56, guests: 1,135)
Robots: 1,181

Forum statistics

Threads
195,396
Posts
2,869,719
Members
156,062
Latest member
tffbrutus

Share this page

Top