F geo landers. Mine had horrid snaggle tooth looking tread. Had to have one replaced under warranty and burn out with the others to even the tread back down. That’s with tire rotations.
Sent from my iPhone using Tapatalk
I just recently repainted my rear bumper bright silver metallic. A can of primer, three cans of color, two cans of that spray max 2k clear (3 coats). I used DuPont for the color, don’t recommend as it doesn’t have enough metal flake in it. Bumper just for reference.
Forgot to add I also...
Clean everything well, seats carpet, headliner and plastic. Trouble comes from the air ducts. If you have a cabin filter, replace it. I haven’t tried it but I believe the best route to take is an ozone machine treatment. I’ve heard of great success with smoke damage smells going away with those...
Did my passenger side a little over a week ago. Bought a $99 dollar harbor freight welder. No experience with welding. Learned on the job but got both snapped studs out. Bonus is I own a welder and have the capability to make very unsafe a non sturdy metal stuff now with the skill I acquired...
I did my passenger side three days ago. I went stock style exhaust manifold due to money constraints. Boy was it a pain in the ass doing it myself. 4 hours it took me for one side, two snapped bolts in the block. On the bright side, I learned to weld that day.
Sent from my iPhone using Tapatalk
Cut from this forum when I did mine. If there’s no pin 11, sometimes it’s tapped to the wiring harness and ya just pin it in. Look under your driver foot well up and to the far left.
Your RF hub should already support remote start if you have all the other goodies you mentioned already...
My 14 had the wiring by the hood latch but no pin connection, I think it was pin 11. So it does not mean it is wired. I just bypassed the darn thing and grounded it.
Sent from my iPhone using Tapatalk
Mine gives me that notification as well. You have to connect to the obd link. Click the Bluetooth icon in the upper left, then select your obd link Mx from the list. It will then connect and show Bluetooth as “on” and “connected to obdlink Mx please select required function”
Another option would be to see if friends or family have an old android phone or tablet lying around. Someone will. Or a pawn shop. The pin pull app was by far the easiest way to get the pin.
Sent from my iPhone using Tapatalk
I used the Chrysler pin puller app. It gave me my code and worked perfectly with my RF hub. Maybe you should try that. I used a 2017+ RF hub (68319680AE) in my 2014 FYI.
And just out of curiosity, not trying to offend ya, but I read some previous posts of yours and others had given specific...
Will be following this thread. I have the same. Broken passenger side studs. My rear studs are broke off in the block. Been putting off doing this. Sounds like ass on startup until it warms up. Then just a slight shart sound on acceleration.
Sent from my iPhone using Tapatalk
Just wired mine up yesterday. Had the pillar power wire in my crew but opted for the center console cigarette lighter for power and ground as it was less length of wire to run. To answer my own question from a few posts up, I used 18 gauge wire.
Sent from my iPhone using Tapatalk
Okay so finally got my hub. Install went smooth. Push start and remote start working thanks to this thread. Now I just have to buy the handles and I’ll be set.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.