Search results

  1. CROD

    Outside Power Mirror Repair--Gruven Motor and Gear-- Anyone Done it?

    In the process of completing my passenger side now. I broke the collet into 3 pieces. Yeah it's possible. lol If you have the same problem reach out to Paul and they sell them. Will save me a headache for sure. :cool:
  2. CROD

    Gruven motor and gear swap power fold mirror collet help/info.

    I had also reached out to Paul at Gruven Parts and he is helping me out. Quick to respond and will save me a headache for sure. :cool:
  3. CROD

    Gruven motor and gear swap power fold mirror collet help/info.

    Was attempting to complete the upgrade with Gruven's motor and gears on my passenger side mirror yesterday. In the process I had an unfortunate mistake on my part when attempting to grind down the 2 tabs flat on the collet. Ended up breaking in 3 pieces. Wanted to check with you guys if you...
    • CROD
    • Thread
    • collet gears upgrade gruven parts power folding mirrors
    • Replies: 1
    • Forum: 4th Gen DIY
  4. CROD

    Do you use anti seize or impact drill on your lug nuts

    Rotate Tires and Wheels myself. Use my Cordless Impact to remove and install using precision wrench control. I always hand tighten the Lugnuts as far as I can then light impact to snug. Then use a Torque wrench to spec after. :cool:
  5. CROD

    02-18 BakFlip MX4 Cover for 6.4ft Bed w/o RamBox - Brand New In Box Still Sealed/Never Opened

    Man if this was a retractable one and your were closer I'd be all over it. lol Great deal tho. Good Luck.
  6. CROD

    2015 ram 1500 brake and rotor upgrade help

    Last month I put the Powerstop Extreme Z36 package on all four wheels which replaced the original OEM’s @ 141k miles. I went with larger tires and the 2” Mopar lift so wanted an upgrade. All good so far. Don’t mind my dirtyass calipers. It’s hot as hell here in Texas. Lol
  7. CROD

    Power Stop Brakes

    Last month I put the Powerstop Extreme Z36 package on all four wheels which replaced the original OEM’s @ 141k miles. I went with larger tires and the 2” Mopar lift so wanted an upgrade. All good so far. Don’t mind my dirtyass calipers. It’s hot as hell here in Texas. Lol
  8. CROD

    What did you do with your 4th Gen this week?

    Nothing crazy just routine maintenance, oil and filter change. Also got in all parts for passive entry and keyless go.
  9. CROD

    8.4 RA4 radio

    PM sent
  10. CROD

    How To Install Amp Research Power Steps

    I never updated my issues with the Amp Steps. It ended up being the torque sequence that I seen in a Silverado install video. Once I followed that correct sequence it solved my issue. Now with more than 4 years and 100k+ miles I’ve had zero issues. Other than the hard freeze 2021 we got here...
  11. CROD

    How To: Add Factory Keyless Enter N Go

    I was able to order a different p/n hub with the help of doughrat19 I think it was 68363199AC. He also made my harness. Right now I’m in search of the ignition switch 6CK46DX9AC. They had one in stock but it was damaged go figure. Lol. This one has no eta from Mopar. Still hunting the now last...
  12. CROD

    How To: Add Factory Keyless Enter N Go

    Well it seems the Hub Receiver - Mopar (68319680AE) is on back order until Dec 31st according to a local dealer in San Antonio. Anyone have any leads on another way to get one sooner?
  13. CROD

    How To: Add Factory Keyless Enter N Go

    Definitely looking into ordering all the parts needed. Currently the C2 rf hub connector is out of stock and seems no other option available. Wouldn't be a bad time to have a 3d printer setup. lol
  14. CROD

    AMP Powersteps 76139-01A Install Issue on Late model 2015 1500

    Thx
  15. CROD

    How To Install Amp Research Power Steps

    Clearance not an issue at this point. I fixed that initially with a flap wheel. :893karatesmiley-thu But I intend on swapping motors back to their original side and make sure the steps are all the way deployed. Which I'm positive I did by the book before but you never know. If that doesn't...
  16. CROD

    AMP Powersteps 76139-01A Install Issue on Late model 2015 1500

    I had been in contact with AMP before the purchase. Just sent my problem to them to see if I can get some help. Maybe I'll call them directly and see. Doesn't help I'm kinda OCD and this bugs the crap out of me. I can't be the only one with this problem hopefully... CROD
  17. CROD

    AMP Powersteps 76139-01A Install Issue on Late model 2015 1500

    Hello all. New to the forum. I have a late model 2015 1500 and I installed the 76139-01A a few weeks ago. Couldn't pass them up for the price I found them for. No crash bracket, but the holes were there for it. At first I was worried I needed the 76138 but if your truck was manufactured after...
  18. CROD

    How To Install Amp Research Power Steps

    I had been in contact with AMP before the purchase. Just sent my problem to them to see if I can get some help. Maybe I'll call them directly and see. Doesn't help I'm kinda OCD and this bugs the crap out of me. I can't be the only one with this problem hopefully...:emotions122: CROD
  19. CROD

    How To Install Amp Research Power Steps

    Hello all. New to the forum. I have a late model 2015 1500 and I installed the 76139-01A a few weeks ago. Couldn't pass them up for the price I found them for. No crash bracket, but the holes were there for it. At first I was worried I needed the 76138 but if your truck was manufactured...

Latest posts

Staff online

Members online

... and 7 more.
Total: 1,334 (members: 57, guests: 1,277)
Robots: 1,381

Forum statistics

Threads
195,493
Posts
2,870,996
Members
156,218
Latest member
TJ4FouR

Share this page

Top