Search results

  1. O

    Zone/bds tie rod ends

    I grease them every oil change. So around every 10k miles. First set the boots ripped. These just seem to have wallered out a bit and the joint seems loose Sent from my iPhone using Tapatalk
  2. O

    Zone/bds tie rod ends

    Yes inners are good. They were replaced last time I replaced the outers. But it’s sounding like I’m just going to have to order bds ones and put them on again..... Sent from my iPhone using Tapatalk
  3. O

    Zone/bds tie rod ends

    I have the zone UCA but the ball joints aren’t bad. I ripped the boots a bit ago and replacing them. But the tie rod ends seem to be what’s wearing out prematurely. All angles seem to be good. I get regular alignments and tire rotations. Sent from my iPhone using Tapatalk
  4. O

    Zone/bds tie rod ends

    Truck does a bit of everything, tows, hauls, used around my property to move stuff Around, take it to some local off-road parks. Sometimes it’ll be black gumbo, other times soft soil/mud and sometimes might be hard as concrete out there. Not doing any rock crawling or anything. And speed varies...
  5. O

    Zone/bds tie rod ends

    They just seem to be wearing out a bit faster than they should be, and I don’t really like the idea if I need one I have to order it and wait for it. Was hoping there would be an upgraded equivalent I could go pick up in store or order a legitimate upgrade that I wouldn’t have to worry about for...
  6. O

    Zone/bds tie rod ends

    I have already replaced with the bds/zone tie rod end twice now, and looking to upgrade to something a little heavier duty. I ordered some not thinking about the tapered end being different and now I’m finding out they’re not gonna work. Was hoping for an upgraded part to freshen up my entire...
  7. O

    Zone/bds tie rod ends

    This will be my second time needing to replace my tie rod ends on my truck. Originally installed as a 4” zone kit with 3” rear lift. It’s adapted and changed over time. However what I am looking for is any info on ball joints that work that are not zone/bds? Does anyone know a cross reference or...
  8. O

    Mevotech TTX series front end parts

    I ordered those off of eBay and got a message they are out of stock and 2-3 weeks until it would ship at the soonest.... and okay thank you. I ordered the lower ball joints and outer tie rod ends, but can’t seem to get the upper ball joints and I have the zone UCA’s but now debating just...
  9. O

    Mevotech TTX series front end parts

    Has anyone used the mevotech TTX front end parts? Do they actually seem “heavy duty” or like upgrades to stock? Also can anyone locate txms25563 upper ball joints? I can’t seem to find them anywhere in stock Sent from my iPhone using Tapatalk
  10. O

    2016 Ram 1500 power fold row mirror

    Thank you! Sent from my iPhone using Tapatalk
  11. O

    2016 Ram 1500 power fold row mirror

    Benny any chance it’s possible to get power fold row mirrors for my 1500? Has standard power fold on it now. Not worried wether it’s chrome or black or paint matched. Just whatever is cheapest option if possible Sent from my iPhone using Tapatalk
  12. O

    Help a brother out, Superlift or BDS

    I recommend 6” beds with the fox. I have the Fox coilovers and my truck rides as close to a Cadillac as a truck can. It still pulls great, hauls pretty alright bad drives beautifully. I started with a 4” and converted to 6” because of the cv axle angle. Also if your considering a lift or a level...
  13. O

    4” Coilover kit

    Your options are the Fox coilovers suggested or go with a American expedition lift kit. Those are the only ones I’ve seen that don’t use spacers. I started with a 4” zone and am basically running a 6” bds at this point. But I originally had the Fox coilovers on with the 4” and adjusted it to...
  14. O

    Zone UCA's with 4-6" lift

    I’m very confused by this thought. How is there any difference in uca angle when using a spacer or coilovers? Your still pushing the height one way or the other and changing the angle of the uca? Sent from my iPhone using Tapatalk
  15. O

    4” lift thinking of going back to stock

    Well, the saga has continued!! But after 5.5 weeks at another dealer I went and picked it up myself. Decided to pull the cv axles and front drive shaft and took it for a drive and it doesn’t make a peep!!! Guess it is the front diff!! Hopefully a call to the dealer and they will be replacing it...
  16. O

    tow mirrors

    Do you still have these? How much are you asking? Sent from my iPhone using Tapatalk
  17. O

    Rear spacers with airlift 1000's

    What airbags do you have? I have 3” higher coils in the rear and have been looking into some bags to help when hauling but haven’t found much for sure! Sent from my iPhone using Tapatalk
  18. O

    Fox leveling kit

    I tried searching and couldn’t find anything, but I was curious what everyone’s thoughts were on he fox coilover leveling shocks? I have a lifted 1500 that I had 5100’s on and then went to the Fox coilovers and loved the ride difference but Im getting a new ram and was thinking of just leveling...
  19. O

    4” lift thinking of going back to stock

    Turns out it was not the transfer case. So far the front hubs, transfer case and turbo have all been replaced......... Sent from my iPhone using Tapatalk
  20. O

    ram 1500 6 cy vs ecodiesel 6?

    Well with the ecodiesel under lawsuit at the moment I’ve noticed you can buy a 4x4 Laramie for about what I paid for my lone star 2 years ago. I’ve had a few issues along the way but some of it was dealer work that caused it. I have a 4” lift with coil overs and 35’s and I average about 18.5-20...
  21. O

    All Repair Parts @ Employee Cost!

    Hi I was curious about a power folding tow mirror for my ram 1500? I’ve seen mixed information all over. I have the standard mirrors with power fold. Sent from my iPhone using Tapatalk
  22. O

    4” lift thinking of going back to stock

    Well turns out it’s the transfer case and they are replacing it under warranty!!! Should finally get my truck back and good in a few days Sent from my iPhone using Tapatalk
  23. O

    20X8.5 chrome clads

    What part of Texas are you in? Sent from my iPhone using Tapatalk
  24. O

    4” lift thinking of going back to stock

    Yeah I mean someone out there has to have a lifted ram and had issues with the transfer case while under warranty! I just can’t find it Sent from my iPhone using Tapatalk
  25. O

    4” lift thinking of going back to stock

    Okay so update to the dealership situation is that they believe my issue is in my transfer case, but they are now trying to determine if the lift caused the transfer case issue. Anyone with experience on whether a 4” lift could’ve caused my transfer case to go bad? Sent from my iPhone using...

Latest posts

Staff online

Members online

Total: 1,349 (members: 49, guests: 1,300)
Robots: 1,757

Forum statistics

Threads
195,479
Posts
2,870,828
Members
156,198
Latest member
Colinil

Share this page

Top