Search results

  1. D

    Following the factory recommended milestone maintenance

    Be sure to get documentation for any work done , never trust a dealer, they do LIE.
  2. D

    Following the factory recommended milestone maintenance

    Id error on the side of caution and have those done at a dealer , lots of times they will look for any excuse to deny warranty work if they can get away with it . And it is worth traveling a few miles to a competent dealer,if you can find one. Warranty is a good thing however the stress of...
  3. D

    Running Lights through 7-Pin Trailer Plug Not Working

    Check for blown fuses.
  4. D

    Summit quits selling Speedmaster parts.

    Makes me want to puke ,seeing trash like this. Thanks for sharing, we can not be over cautious about buying fake parts . Most would be pretty confident buying from summit , perhaps its best to go straight to the manufacturer if at all possible.
  5. D

    Interior Road Noise

    On the gen 4s sound deadner on the rear cab wall makes a big difference, I’m not familiar with the 5th gen
  6. D

    PCV Valve Woes

    Maybe a screw or two driven into the remains then grip those and finish removing.
  7. D

    Running Boards 2021 Warlock

    Those are called Rivit nuts or more common rivnuts these are available in many different sizes. Measure the holes then find the appropriate rivnut ,install then mount your boards.
  8. D

    Radio interference stops when brake depressed.

    Head bolts
  9. D

    Check engine light 2012 dodge ram 3500

    You may have a pin that did not seat properly when you plugged everything back together . Sometimes a terminal will work loose in one of the harness connections, good luck trying to locate it if that’s the issue.
  10. D

    Suspected vacuum leak

    Check the torque on your intake manifold bolts , they are known to loosen over time. 108 inch pounds.
  11. D

    Think I might crash

    Slow down until it’s fixed properly or you might not see 19 .
  12. D

    Think I might crash

    How worn are those fronts ? Last time tires was balanced ? Anti-sway bar bushings and/or end-links , shocks leaking ? How many miles ?
  13. D

    A/C Question 2008 Ram 1500

    When the pressure is dropping the clutch is engaged,thus turning the compressor, which makes the pressure on the gauge drop some . Then the compressor cycles, as it should. It engages the clutch again drawing in more refrigerant. The compressor normally cycles off and on like this . Pretty sure...
  14. D

    Looking for new Shocks

    No alignment is necessary when you replace shocks.
  15. D

    A/C Question 2008 Ram 1500

    Find directions for how air conditioning operates in automobiles. Read these directions or visit YouTube so you get an understanding of what should be happening. Finish charging the system. It still needs more gas.
  16. D

    NEED HELP! The elusive abs issue

    Glad you got it fixed. Now go join a ford forum.
  17. D

    6.4 Intake manifold to 5.7 throwing codes P0174 p0701 p0300

    Any results ?
  18. D

    New Member & New Owner

    Use caution in wet conditions, as those factory SRAs do not do well at all , especially when they get a few miles on them . Welcome .
  19. D

    Rear right wheel bent

    Rear upper and lower control arm bushings toasted .
  20. D

    New grill 1 vs 2

    Stick with the orange one ,it’s much better looking.
  21. D

    Regrets? 2023 Ram 1500, 5.7 eTorque, 5'7" Short Bed, Mostly Loaded, 3.92, less than 1000 miles

    For as much and often you tow , I would step up to the 2500 for the wieght for a more stable ride. Let alone when you have to make that unexpected emergency stop , the 2500 would give me much more peace of mind .
  22. D

    6.4 hemi Coils and plugs

    You can purchase the factory plugs from other than the dealer and save lots of $$. No need to change a coil except if it is defective,and then the OEM is a very good product and you won’t find gains with others.
  23. D

    Need help with touch up paint

    You may want to try a different dealer, sometimes one may be more capable than another and they can get the job done . If that’s not successful try locating an automotive paint supplier and have a chat with the counter person, lots of times they can provide different options.
  24. D

    Control arms

    Clayton are heavy duty, they should hold up to whatever you can throw at them.
  25. D

    Oily residue

    Neighbors dog ******* on your tires ? Check under and behind the wheels for any signs.

Latest posts

Staff online

Members online

... and 8 more.
Total: 1,261 (members: 58, guests: 1,203)
Robots: 1,697

Forum statistics

Threads
195,459
Posts
2,870,523
Members
156,168
Latest member
alhk

Share this page

Top