Search results

  1. 2010 Infantry Vet

    $60 Enay pocket fender flare review

    *Edit* meant to say EBAY. Figured I would pull the trigger on a $60 set of pocket style fender flares off eBay. I have no complaints whatsoever. I chose smooth since I will be getting them painted. Overall, they are quality flares, and include all the gaskets and stainless bolts. I highly...
  2. 2010 Infantry Vet

    Dana 60 build parts ordered

    Front Dana 60 build parts were ordered today. Once they are all welded on, I can measure for Icon adj remote reservoir coilovers. Project is coming along very nicely.
  3. 2010 Infantry Vet

    Super duty axle swap

    2007 dana super 60 front, 10.5” sterling rear. Built trusses and welded them on. Grunt Fab adj control arms, 38x13.50x20 Nitto trail grapplers. Going to use Icon adj compression coilovers.
  4. 2010 Infantry Vet

    Long arm 4 link

    My long arm 4-Link is now finished with my dana super 60 up front. Very happy how it turned out. Now I gotta fab up a track bar.
  5. 2010 Infantry Vet

    Icon reservoir mount front coilovers.

    if you have Icon coilovers, are you happy with them? I’m looking to buy a set of 7”-9” lift Icon resevoir coilovers for my dana 60 application. https://www.bilsteinlifts.com/shop/ford/f350/2005-2016-f350/icon-7-9-lift-coilovers-kit-for-2005-2016-ford-f250-f350-super-duty/
  6. 2010 Infantry Vet

    Got my 20x12 8 bolt hostile sprocket wheels

    Getting them mounted tomorrow. Then I can start taking measurements for ride height.
  7. 2010 Infantry Vet

    Need help deciding on flowmaster muffler

    Currently running JBA long tube headers, off road Y pipe, 14” magnaflow, and no resonators with 6” tips. Raspy and crackles on down rev. I prefer the nice clean sound of flowmaster, but don’t know which one to get. With my current magnaflow muffler, truck is annoyingly loud since I put the...
  8. 2010 Infantry Vet

    Adj control arms

    decided to change my control arm design. Now using 2” OD 1/4” Wall DOM Tubing. 1.25-12 SPC A-Axis joints that flex 10° more than Johhny joints, and are sealed. Weld in bungs have a hex nut machined into them, so they are adjustable while mounted on the truck. Both ends of the arms use sealed...
  9. 2010 Infantry Vet

    Dana 60 front axle swap

    Ok I bought a 2007 dana 60 front axle with the 35 spline inner/outer, dual piston calipers, stronger unit bearings, and wheel speed sensors. This is the strongest of the dana 60 front axles. I am installing this axle in my 2010 ram 1500. I was going to make a 12” lift kit for our rams, but the...
  10. 2010 Infantry Vet

    Dana 60 front axle and rear 10.5 sterling swap

    looked into making a true 12” lift kit for our rams, but the big company that makes knuckles wants $35-40k to make sand castings. I’m not spending that, and the tiny front diff and axle tubes would never hold up to hard off road abuse with 38s. So I pulled my 1500 axles, and am installing 2007...
  11. 2010 Infantry Vet

    Which one of my plastic pulleys broke?

    I removed my clutch fan, and that sumbitch was just about welded on. After I got it off, I noticed a broken plastic pulley. Is it power steering, or AC condensor?
  12. 2010 Infantry Vet

    Hertz 1800.3 midbass for the doors

    Are these worth the price? https://www.crutchfield.com/p_301ML18003/Hertz-ML-1800-3.html
  13. 2010 Infantry Vet

    Finally finished my upper control arms

    1.5" DOM tubing, all joints are tig welded. Where the joint mounts to the frame, SPC x-Axis sealed flex joints are used. Finish process is sand blasted, zinc primered to keep from rusting, and then powder coat. Other brands use poly bushings, that squeak. My arms use SPC X-Axis sealed flex...
  14. 2010 Infantry Vet

    Does my ram have a fuse for the headlights?

    The factory plug has power in one pin, and no power to the other 2 pins. I tested the retro plug, and none of the 3 wires have power. There has to be a headlight fuse somewhere that is blown. Parking lights work, but no headlights.
  15. 2010 Infantry Vet

    Infinity kappa perfect 6.5 components

    Anyone here have these? If so, let's hear your feedback. Infinity Kappa Perfect 6-1/2" 2-Way Component Speakers https://www.amazon.com/dp/B072MLPGP1/ref=cm_sw_r_cp_apa_i_LEBtDbQZF1XA6
  16. 2010 Infantry Vet

    6" tips finally installed

    Finally had time to install my 6" tips. I installed 2.5" pipe from my muffler back, to replace the restrictive 2.25" factory pipe. Sand blasted, zinc primered, then powdercoated, to deter rust from forming from rock chips. Very happy with the quality of the tips.
  17. 2010 Infantry Vet

    Front upper control arm bolt size 12mm?

    I'm not at the shop, and need to get new front upper control arm bolts, and am hoping someone can confirm they are 12mm diameter. Thanks.
  18. 2010 Infantry Vet

    Smittybilt 12k synthetic line winch installed

    Not the best pics, it's parked in my shop. Bumper is a go rhino BR5, BR20 rear.
  19. 2010 Infantry Vet

    Adj heat Esab Torch head

    Ordered this tig rig that has heat adjustments on the torch head. My thermal arc 252i welder is very complex, and a standard rig that you reverse the polarity on, the heat would fluctuate 10-15 volts. It didn't come with a gas lens, so I ordered one that will work with this rig. Super pumped to...
  20. 2010 Infantry Vet

    Energy Suspension front end link bushings

    Has anyone here upgraded to energy front sway bar bushings? I measured my stock ones, ID seems to be 1/2". But they could be worn out. Steel washer hole is 3/8". OD is 1.5" Anyone have a part number?
  21. 2010 Infantry Vet

    Do Not order from retrofit source!

    I ordered halogen to projector adaptor harnesses, and passenger side works fine, but when i plug the factory green plug into the adaptor without the resistor (or whatever it's called) i have no headlights. I am using factory own projector headlights. I have not even been able to speak to anyone...
  22. 2010 Infantry Vet

    Updated pics...

    Picked my truck up from my painters, since he is moving to a new shop. Installed my AMP steps, and projector headlights. With my current 6" RC lift, and 38x13.50" tires on 20x12-44 wheels, the tires rub my Go Rhino front bumper at 3/4 of wheel turn. Way too much for safe driving. 12" Grunt...
  23. 2010 Infantry Vet

    Part # for center console rubber grommet

    Can someone tell me the part # for this rubber grommet? 2013+ center console rubber under where dash meets console.
  24. 2010 Infantry Vet

    2016 heated wheel on 2010

    Can I reuse my stock non heated 2010 clock spring when I install a 2016 heated wheel?
  25. 2010 Infantry Vet

    Inner wheel well liner clips/bolts

    Where is a cheap place to order new front wheel well liner bolts and clips from? Pic attached of what im looking for.

Members online

Forum statistics

Threads
194,902
Posts
2,863,861
Members
155,252
Latest member
radikio
Top