Search results

  1. BraedyShaw

    Ram 1500 Zone 6/5 - knuckle touching LCAs

    Thanks, didn’t see that thread before.
  2. BraedyShaw

    Ram 1500 Zone 6/5 - knuckle touching LCAs

    Just installed my zone 6/5 on my 2017 ram 1500 4x4. Been a couple days so I thought I would check how everything was looking underneath. Lift was installed my self. Noticed that my lower control arms (both sides) have marks on them from the knuckle hitting it at full turn. I’ll attach a...
  3. BraedyShaw

    1500 alignment issues - caster

    Yea i know, I’m a little concerned, however I’m not crazy on a stuffed look. Also don’t really want to go up to 37s, partially for cost but also for performance and extra wear and tear Offroad on the ifs. If they look real small I might see what it takes to lower it a bit. The front I would...
  4. BraedyShaw

    1500 alignment issues - caster

    Another question if you guys don’t mind: Currently have my stock tires/wheels w/ spacers on (yes it looks hilarious, like a big dog in little shoes) as I am waiting for my 35s to get here in a week/ish. Is it important to have it realigned once I put the new tires on? Would rather not and save...
  5. BraedyShaw

    1500 alignment issues - caster

    Yes it is, great forum. Every time I ask questions I get help from lots of people. I was always nervous about posting but everyone is super nice!
  6. BraedyShaw

    1500 alignment issues - caster

    I installed the lift my self, just checked the ucas, I’m a idiot and they’re on the wrong side. I’ll swap them and get it realigned. Thanks for the help.
  7. BraedyShaw

    1500 alignment issues - caster

    Just installed my zone 6/5 with bils and zones heavy duty UCAs, currently at the shop getting it aligned and they’re telling me they can’t get the caster right, said they have it completely maxed out. Anyone else have this problem? Ways to fix it?
    • BraedyShaw
    • Thread
    • 6in alighment caster zone
    • Replies: 17
    • Forum: Lifted
  8. BraedyShaw

    PCM swap help!

    Alright, here’s the update. (With unlocked pcm) Disconnected battery, discharged then started up. All the same problems. Install one of the stock diablo tunes, still the exact same thing. Checked the codes, it showed ignition coil codes, misfire codes, intake and manifold codes. Which kinda...
  9. BraedyShaw

    PCM swap help!

    No before the swap it sounded perfectly healthy. I’ll post a pic of the connectors as soon as I get a chance, at work right now. Previously with the old pcm it drove normal, no issues or anything at all. No weird sounds, no weird idle, no thing. I’m going to put it back on and see if it goes...
  10. BraedyShaw

    PCM swap help!

    Here’s as clip of me excelerating, around 80% throttle. I’ll try and do a discharge to see if that helps anything. Thanks
  11. BraedyShaw

    PCM swap help!

    Okay that makes sense, because this thing sounds crazy right now. Also it’s telling me my battery voltage is low? Any idea? The battery should be fine, cranks it fine, driving for a few min now and it’s showing normal 13-14v
  12. BraedyShaw

    PCM swap help!

    Update: Install the new pcm and she starts up, throttle is calibarated. Only thing is she don’t sound the same, and I’m going a weird idle, almost bouncy. Any ideas? Also it seems to be backfiring or something, I’ll try and post a vid. I have muffler delete so it’s always a little raspy but...
  13. BraedyShaw

    PCM swap help!

    Okay good ish news, messed with the connections and got it started up(with the stock pcm). Going to try and get the unlocked one now
  14. BraedyShaw

    PCM swap help!

    Yea I disconnected the battery. I’ll go check the connections again
  15. BraedyShaw

    PCM swap help!

    Sorry I don’t know if is the right area for this or if this has been addressed before, didn’t see anything. So I received my new unlocked PCM/I3 tuner from Hemifever this morning. I drove the truck this morning (so I know is fine). I get home, disconnect the battery, swap the pcm, reconnect...
  16. BraedyShaw

    Budget Friendly Headers

    Alright looks like I’ll skip the cheap header idea lol.
  17. BraedyShaw

    Budget Friendly Headers

    Saw these headers on protuninglab for 190.00, was wondering if they are any better good. I don’t need the best just something better then stock. If you have any budget friendly options let me know. Appreciate any help...
  18. BraedyShaw

    1500 light bar

    Just right on Rough Country's page, free shipping, got mine in 2 days.
  19. BraedyShaw

    RCX UCAs??

    Yea that’s a good point, I’ll go with the zones. Thanks
  20. BraedyShaw

    RCX UCAs??

    Going to be lifting my truck right away, already have the lift and struts in my garage. Doing zone 6/5 with 5100s in front and fox adventure series in rear. Wondering if anyone has any experience with the RCX UCAs, there only 300 and I’m in between them and the zone ones. Wouldn’t mind saving...
  21. BraedyShaw

    1500 light bar

    I got the RCX 50in curved, I like it a lot. Seems to be good bang for the buck. Everything in the box looked good and seems like it should last.

Latest posts

Staff online

Members online

... and 15 more.
Total: 2,009 (members: 65, guests: 1,944)
Robots: 1,768

Forum statistics

Threads
195,604
Posts
2,872,427
Members
156,417
Latest member
Am2453

Share this page

Top