Search results

  1. BULLRAM

    545RFE Problems after Diablo tune

    no sir THAT IS NOT WHAT HAPPENED....I always downshift with the ERS before doing that, this is a 0 mile transmission that does this, not a high mileage transmission that has problems, at the time I downshifted it w/o the ERS it does this, there is no way if you took a NEW truck that has 20 or...
  2. BULLRAM

    545RFE Problems after Diablo tune

    Hello, I have a 2009 Dodge Ram 5.7 with 150,000 miles, the transmission shifted perfectly until a few weeks ago, I knew by the codes that the clutches were gone, I pull a heavy trailer, I had my transmission rebuilt and all was good, I decided to try a Diablo tuner instead of my Superchips, I...
  3. BULLRAM

    A/C heater actuators on 09 dodge ram.

    Pull off the center dash, pull out the radio, move the A/C knob , you will see the other actuators and it is easy if you have your hand on them to see which one it is.
  4. BULLRAM

    List of desired 4th Gen Mopar options and part numbers.

    For the older trucks 08--2012 heres one 68044459AB its the step pad for our factory bars
  5. BULLRAM

    ProRyde 3/1 2wd Level?

    harrison and 012rambo are right on the money, after going to the site I saw that the original title of your post , looked like you were contemplating a 3/1 lift............in fact the site calls it a 3 in 1 KIT...they show up to a 2.0 inch lift which would be not bad at all......I cant speak...
  6. BULLRAM

    Daystar Leveling Kit Question

    It does NOT matter which end of the spring....most put it on top.....4 wd has the nuts on it, the 2WD only sits there,.. the reason that your spacer or puck did not raise it like you wanted it too, is most of the sellers have NO clue how to tell how much it will raise it, the weight of an...
  7. BULLRAM

    2wd Leveling problems

    That is correct, I typed it too fast to proof read, just the 13-14......
  8. BULLRAM

    2wd Leveling problems

    The problem is the upper control arm on the newer 2012 2013 2014, do not like lift in the front with spacers, the ball joint is popping out and most I have seen do this easily...the cure is pretty simple , they use the control arm off of the older trucks like mine 2009, and it fixes it...
  9. BULLRAM

    Ram Lifetime warranty

    My 2009 came with lifetime Powertrain warranty, engine ,transmission, rear end......they replaced a head that had a bolt broken off in it , all the coolant, all gaskets, gave me a new loaner truck, all free
  10. BULLRAM

    Before & After

    finstinct........the stock rims will work perfect, but to get the rears to match you will need 1.5 inch spacers on the rear, get wheel concentric and hub concentric, I have towed my 32 foot TT ,since 2009, and they stay put, had a gear put in and the guy had hell getting them off they were so...
  11. BULLRAM

    2WD Help Needed...

    The other posters are spot on, ans also the Blls 5100 , wont fit on our 2WD completly different mounting ends...stay with stock shocks or aftermarket BUT stock length...
  12. BULLRAM

    305 tire on stock 20x9 wheel

    I have that exact setup on tire and wheel, since 2009, it looks really good
  13. BULLRAM

    Level Kit??

    MOPARGIRL.is your truck 2WD or 4WD, that will make a difference...
  14. BULLRAM

    Wanted side moulding

    looking for OEM black side moulding ,98/99/2000/ 2001 ....4 door Ram, must be 4 door... I know I will have to put tape back on, price with shipped to 77583 Texas
  15. BULLRAM

    Maxtrac Truckin Magazine Install Article!!!

    HEY............MAX ...... QUOTE: "You wouldn't believe the amount of calls we get with 3/4 ton or 1 ton 2wd owners looking for parts because everything out there for them is for the solid axle 4wd's.." CORNER THE MARKET !!!!!!!!!!!!!!!!!!!!!! when a company called CST made a 7 inch lift ...
  16. BULLRAM

    Too Lift or to Level what do you think or suggest?

    " Hub and wheel centric spacers are what you will need. Motorsport tech is where I got the set on my last truck from ($250ish). They were on my truck for 60,000 VERY HARD miles - I raced with them, hell I had the truck airborne with them (twice) and never an issue. do some reading on spacers...
  17. BULLRAM

    Maxtrac Truckin Magazine Install Article!!!

    It was a great write up .
  18. BULLRAM

    Maxtrac Truckin Magazine Install Article!!!

    Great article, good kit.....Isnt the picture of the kit in that article for a leaf spring truck ??
  19. BULLRAM

    Pro Comp 4.5" rear lift???

    Im with SAUSEC, the rear kit is an easy install from CST or Maxtrac, and it sits it up there real nice, good ride...
  20. BULLRAM

    7" lift with spacers ?

    wow ,thats strange...but at least it works
  21. BULLRAM

    3in eBay spindles?

    Sorry it took me so long to reply.... I am using the stock lines on there now since 2009, the brake lines fit on mine (2009) PERFECT, for your peace of mind order the long lines , you know they will fit and you will be on the road, I can tell you that I have swapped 3 trucks lines so far all...
  22. BULLRAM

    7" lift with spacers ?

    No trimming at all.....just bolted them up, and torqued
  23. BULLRAM

    7" lift with spacers ?

    I bought mine in 2009, and they are perfect, I tow a 32 foot travel trailer all the time, mine are Hub Concentric and Wheel concentric, it means that the wheels themselves dont rest soley on the lugs ,they rest on the hub in the center like the factory ones, they are not cheap at all, but have...
  24. BULLRAM

    3in eBay spindles?

    You can use the stock brake lines on the 4 inch spindles with no problems, you have to swap the left one for the right one, they will fit and have plenty of slack for the droop., the best way is new longer lines, my aftermarket new lines collapsed one night on the side of the road ,locking the...
  25. BULLRAM

    RCSB 7" Lift on 35s, 2WD Stock 20"s

    Are the pictures still up ???, I cant see them just the dreaded red ( X )
Top