2001 1500 4x4 I am debating on saving this truck parting it out or just scrapping someone gave it to me not sure if its worth fixing. It has 140k fires right up interior is clean dash not even cracked.. However rockers are gone and the frame twards the rear on both sides cracked not really a...
I have a 2014 ram tradesman It has the factory backup cam with the TINY screen so its kind of useless when backing up to my trailer cant see it. I am looking to swap it for a aftermarket setup with abdroid I see tons of these but they all have mixed reviews...
Besides my engine issue on my 2014 my win/Ingnition switch just failed on me had to have it towed home from work. After messing with it if i jiggle it or try it a million times it will finally start I replaced one of these before on a older ram so its not a big deal my part number on the back of...
2014 122k 5.7 I bought it with 114k on it had the usuall bad cam/lifters replaced both using mopar cam and ENGINE TEC lifters from rockauto. I have used them before without to many issues however 2k miles one collapsed replaced them all again they sent me new ones. I went on a very long trip...
Weather is starting to get chilly in the mornings now and the one thing I miss from my 2011 is the remote start so I am looking to install one on my 2014. However I have seen and hear of horror storys of them going bad and causing trucks not to start and all other kinds of issues. Has anyone...
I just got done doing a camshaft job on a 2011 1500 5.7 everything is good so far however the a/c condenser/cooling fan Is not working code p0481 fan control circut/open. I jumped out the fan and it works so its good I checked all fuses and determined I have no power going to the green and black...
So I picked up a 05 Ram 1500 5.7 for scrap price.. body is actually in good shape. It has been a long time since I worked on a older hemi and cant say I have seen this issue before. It fires right up but runs terrible and smokes engine sounds good no noise oil looks good I have yet to tear it...
My new to me 2014 ram 5.7 wont go into 4 low says shift incomplete however it goes into 4 lock with no issues. I tried swapping out the shift acuator made no diffrence so I returned it anyone else have this issue? My scanner comes up with no codes. Unless I am doing something wrong here put into...
I have a 2011 ram 5.7 I am working on only has 120k somehow they ran it out of oil and locked er up. I have a 2019 5.7 engine sitting in my garage from a wrecked classic my question is has anyone swapped a 2013+ engine into a older 4th gen? I am getting conflicting reports I know the tone ring...
I am having problems programming new fokib keys to my new 2014 Ram I have programmed many keys before on my other trucks without issues using my matco scanner and alphaOBD. I keep getting ECU timed thats the main error I sometimes get 'unable to determine if the secret key is locked in the RHF'...
Been drivin around my new to me 2014 ram 5.7 with 114k for the past 2 weeks I am getting use to the stupid dial shifter. However there is 1 annoying thing that drives me nutz this truck 1-2 up shift is weird depends on temp and slowing down 2-1 it jerks every single dam time thigns guna give me...
I just picked up my new truck 2014 ram 5.7 105k has a bad lifter on cylinder 7. I figured I would post a vid of what it sounds like when needle bearings fall out of the roller before I tear it down to do the cam ect. Most people including the guy I got it from and his mechanic would think this...
I have had my 2011 ram 5.7 4x4 big horn with 220k for 5 years now by far best truck I have ever owned I bought it at 150k with the usual bad cam been running it ever since. This is my daily driver and I haul my car trailer often honestly I am suprised it has held up this long. Recently I am...
I am working on a 2012 ram 5.7 overheated had oil in coolant like ALOT tons of it was packed but no coolant In oil. So I tore it down sent heads off to get checked/re surfaced he said they where warped throw it all back together flush the living hell out of the system new hoses new rad ect. Let...
While driving my 2011 Ram 1500 5.7 today one of my tailpipes fell off the flowmaster muffler I installed in 2019 is shot rotted out bad. I love the sound of it however I would not mind something a smidge quieter gets on my nerves a bit when driving down parkway since I only have the 5 speed tend...
I am possibly doing a cam job on a 2012 2500 non mds I am able to get everything needed for the job. However rockauto now only has Enginetech lifters and they suck thats what i got in mine they fall apart and are noisy. What brand lifters have you guys been using? Should i just try to find a set...
Do not buy coooper tires this is the second time I have been burnt by this brand in 3 months. First my 2011 jeeps cooper tires with 80% tread 1.5 yrs old went out of round on the inner edges all 4 noticed one day it started to sound like i had mud tires. Today I am driving my truck with...
2010 Ram 1500 5.7 4x4 I bought this truck as a project a while back rebuilt motor ect it was used and abused previous owner ran it into the ground basically. It has been a royal pain in my ****!! one thing after another had a front end clunk/noise when driving/turning. I finally found out the...
2010 Ram 1500 5.7 I was replacing pads/rotors today on this truck they where like metal on metal guy who owned it before me abused the fk outa it. Everything was going great pumped brakes up after I did the fronts felt great did the rear passenger side and then brakes went almost to the floor no...
Picked up a 2006 ram 1500 4.7 150k 2 door 2wd lowest model crank windows ect. It does not start it was very low on oil almost none in it they said it just died on them turns over and sounds fine but doesnt even try to start good fuel pressure to rail. I plugged in my scanner and here are the...
Just installed rebuilt 5.7 motor in a 2010 ram I am working on problem I am having is it will turn over sometimes most of the time not. This was a issue before the motor work If I ground starter to battery NEG it fires right up every time no issues. I cleaned all grounds I could find where/how...
2011 Ram 1500 5.7 220k Past 2 days have been having a issue with airflow through my vents sometimes its fine sometimes its cut in half scanned my truck got this. B11CB-92 MAIN LEFT TEMP DOOR 1 CONTROL PERFORMANCE OR INCORRECT OPERATION. Where is this actuator located and is it possible to get to?.
My 2011 ram has the usual rocker and cab corner rot almost looks like it rots from inside out.. I been coating it trying to slow it. But its now to a point where it has holes falling apart needs to be replaced fathers 2012 and our 2010 will need to be done soon as well Inner rockers have some...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.