Search results

  1. A

    My Jay Greene Cam job is.. uggh, done

    It's hard being a small business. Most die due to customer service. When you start and have free time your customer service is great. Then you get busy and fail to notice and one day it drops faster than it grew.
  2. A

    My 5.7 is trashed

    I owned a 16 pentastar a few years ago. Great engine and trans combo. I only bought my current 12 hemi bc it was cheap and needed a rebuild. I rebuilt the engine and currently have equity in it. I feel bad for those who cannot do their own repairs and or bought it without warranty at market...
  3. A

    My 5.7 is trashed

    Full rebuild should be done each time. I think FCA knows this but some dealerships take the easy route. The biggest concern I've seen is the number one main bolt is an oil passage. It is full of sludge an shrapnel when I pulled mine.
  4. A

    Cam/Lifter Swap Lessons Learned

    At least you got it done. I bought a 12 with 138k with oil leaking into coolant. Machine shop cleaned both heads and reassembled. Same problem. Bought a 19 E-torque engine, tore it apart to rebuild, ran great but reluctor ring was not compatible. Took it apart for the third time just to...
  5. A

    Morimoto matchbox retrofitted vertical fogs with switchback halos

    Permasealed? How difficult was it to open?
  6. A

    Modifystreet headlight build

    His post can be found in the healight junkies fb group. Search Ram.
  7. A

    Modifystreet headlight build

    This was my initial thought as well as far as mounting the d2s. The fb poster could have made the process simpler but I don’t want to assume. How do you like the d2s? I’m planning to run mine with my xenon depot ballast and amp connector for the bulbs...
  8. A

    Modifystreet headlight build

  9. A

    Modifystreet headlight build

  10. A

    Modifystreet headlight build

  11. A

    Modifystreet headlight build

    I reached put to the guy but haven't heard back. He put alot of work into it but the mounting was crap. Here's his post What do you guys think of my most recent build for my shop truck? AlphaRex 09-18 Ram “2019 Style” Headlights Morimoto D2S 4.0’s Profile D2S Projectors Custom Fabricated...
  12. A

    Modifystreet headlight build

    I was looking on fb and found one person who have retro d2s into these headlights. It looks like alot of work. I thought it would be pretty straight forward. He apparently does retrofit but mentioned that he will not offer this swap due to time/money. I will probably try my hands at...
  13. A

    Modifystreet headlight build

    Good to know. I'll probably do a d2s. I prefer hid myself due maturity of the tech. I would rather swap ballasts than projector housings. I hated the led that comes on the new camry. Mainly their blue color. They were half as bright as my mini h1. I thought it was due to being in a lower...
  14. A

    Modifystreet headlight build

    https://www.cumminsforum.com/forum/2013-2018-general-discussion/2517149-bi-led-morimoto-m-led-2-0-a-8.html?amp=1 Read thru a little here and there. The op wasn't too satisfied with the results.
  15. A

    Modifystreet headlight build

    FML I may upgrade to mled 2.0 after I sell my quads. Do you know the size of the projector? I assume 2.5"?
  16. A

    Modifystreet headlight build

    Had a short drive around the block. H1.7 vs alphas... H1 10 alphas 7. The foreground scatter of the alphas is annoying but only noticeable when driving slow or parking. The H1 are wider. Cutoff is about the same. Not sure how I feel about the alphas. The alphas did blend pretty well at...
  17. A

    Anyone try Modifystreet headlights?

    How did you guys remove the indentations? Rotary tool? Manual file?
  18. A

    Modifystreet headlight build

    Only happens with lights on. No error on turn signal though. This happened to me with Morimoto switchback corner bulb before but errors on both turn and signal. Here’s what I have in Alfa Low beam-hid Led parking - yes Led turn - yes Bixenon - no Led low - no
  19. A

    Modifystreet headlight build

    I do. I tried everything that's been suggested. A few times.
  20. A

    Modifystreet headlight build

    Installed XD hid 5k on low beam and katana on highbeam. The scatter is more than I would like but I will try it out tonight. I still can't get rid of the parking light error. I used morimoto resisters on my quad. So I may have to move them over.
  21. A

    Anyone try Modifystreet headlights?

    I just installed the alphas from my custom quad with mini h1 7. I have xd xtreme hid 35w and am waiting for the gtr ultra 2.0 $180 with 10% Off BTW. The led should arrive next week. I work for a sports lighting company. 1k watt led fixtures. Well.... I have a $2k light level meter. That I...
  22. A

    Modifystreet headlight build

    Installed today with incandescent bulbs. Man not really sure if I like the look. I may just be accustomed to my quad build. Cut off seems OK. Real test tomorrow when my xd 5000k bulbs come in. I was running 4300k before.
  23. A

    Modifystreet headlight build

    FYI I did not have to cut anything to fit this particular shroud. Most round shrouds require cutting. Not bad for black or painted housing but pretty difficult for Chrome.
  24. A

    Modifystreet headlight build

  25. A

    Modifystreet headlight build

    Good to know they are decent. Willing to sell/ship the originals? I may investigate a bolt on swap.

Latest posts

Members online

... and 9 more.
Total: 1,465 (members: 59, guests: 1,406)
Robots: 1,596

Forum statistics

Threads
195,592
Posts
2,872,238
Members
156,383
Latest member
Morrich17

Share this page

Top